Looking for a G19 in Metro Manila? [Archive] - Glock Talk

PDA

View Full Version : Looking for a G19 in Metro Manila?


meowr
06-28-2009, 22:46
Heya everyone,
I was wondering if anyone can tell me where I can find a Glock G19 in Metro Manila?
I'm about to check out Makati Cinema Square, hoping that a store there might have one in stock?
I see the filipino gun store directory thread, but checking out all the stores would take quite a while. I'm hoping someone has seen one, and would help me speed up the searching process.
Any help in locating one would be greatly appreciated.

Thanks,
-Meowr

saki1611
06-28-2009, 23:10
i dont think you can find one, until now there's no gunstore selling glocks. you can probably find one but used and a hihger price...

jacques
06-28-2009, 23:14
try sulit.com.ph .. btw its used

BrassKnuckle
06-29-2009, 08:10
try sulit.com.ph .. btw its used

Be careful with who you deal with though. You never know when you're being set up for a hulidap scam.

kcboy
06-29-2009, 08:22
GLOCK 19
100 rounds fired
very fresh
52k FIRM
buyer shoulder's transfer fee


for more info kindly call 09178200486 / 5148955 rylan

Try to contact the person above, maybe you can get it if it is still available. good luck.

Poodle
06-29-2009, 17:52
Advanced Weapon Systems sa Greenhills?

http://www.hotfrog.ph/Companies/ADVANCED-WEAPON-SYSTEMS-TRDG

#14 G/F Shopville Shopping Center, Greenhills, San Juan, M. M., San Juan, MNL

tel: (02) 724.4098 fax: (02) 722.4098

choi_tan2000
06-29-2009, 17:58
bro my friend is selling his g19 slightly used also nver used in competition drawer gun only.

i think asking is 43,000 plus license

thanks

choi

meowr
06-29-2009, 18:08
Thanks for the responses!

I certainly appreciate all the info.

As for the used G19's, thanks, but I would prefer a new handgun.

So I went to Makati Cinema Square yesterday, and since I can't get a new G19, I'm leaning towards a Sig P250 Compact in 9mm.
I've read some comparison threads on the P250, and some have mentioned a few problems.

Any Filipinos with this handgun? Seems like there's a lot of stock here.
It feeels really nice in my hands, and the trigger feels really smooth.

I sure do miss my G19 and G34 that I have in the States.

choi_tan2000
06-29-2009, 19:18
heres another option bro

czPO7 priced at 38000 unit only

choi_tan2000
06-29-2009, 19:34
http://i115.photobucket.com/albums/n307/choi_tan2000/czpo7.jpg

isuzu
06-29-2009, 19:59
There was someone in another forum that was complaining that the dealer who is selling CZ PO7s back home is selling the decocker module separately from the gun. CZ would not be happy with this practice, since one of the features of the gun is that the unit comes with two types of trigger systems.

choi_tan2000
06-29-2009, 20:01
hmm actualy bro tama ka it sells here separately in our country

Black_SIR
06-29-2009, 20:10
bro my friend is selling his g19 slightly used also nver used in competition drawer gun only.

i think asking is 43,000 plus license

thanks

choi

sir may g23? heheheheh sure buyer

choi_tan2000
06-29-2009, 20:11
sory bro g19 lng yan sa fren ko bro

kcboy
06-29-2009, 22:16
don't get the sig p250, i've heard a lot of negative feedbacks about the pistol, just wait until the kinks of that gun have been fixed. Good luck on your quest to find the pistol that fit your needs.

BrassKnuckle
06-30-2009, 03:23
don't get the sig p250, i've heard a lot of negative feedbacks about the pistol, just wait until the kinks of that gun have been fixed. Good luck on your quest to find the pistol that fit your needs.

Agree. They had a Sig 250 vs Glock 19 poll over at the Sig forum and the G19 won by a wide margin.

Sig forum na yon...

CatsMeow
06-30-2009, 03:42
Could you wait for two weeks? The gunshow is just around the corner. Surely there will be some new G19s there. Even last year when the supply dried up I saw at least one.

meowr
06-30-2009, 08:38
Not sure I can wait 2 weeks to start the process.

Though if I get the P250 now, I wouldn't mind trying to find another handgun at the gunshow.

The one thing that might worry me about the P250 would be that some people have complained about light primer strikes. I probably wouldn't mind the longer trigger pull/reset.
Even though I've come from shooting Glocks (back in the States) I'll put in the amount of practice to get used to a new trigger.

BTW, can anyone here tell me if there's a limit to handgun purchases?
I'm hearing that if you join a gun club, there's no real limit to the number of licensed handguns you can have? Is this true?

Also, in regards to concealed carry permits, can you get 2 permits for 2 different handguns? (for example, I get a CCW for the P250, then I find it's a bit cumbersome, so I want to CCW a G26, assuming I can find one, of course) Do I have to wait for one to expire, then apply for the CCW for the other?

Thanks for everyone's input....

choi_tan2000
06-30-2009, 18:47
meowr

bro yes you can get many firearms up to 10 FA's. yes you can also apply for 2 PTC-FOR permit to cary firearms outside residence (CCW in the US)

choi

magister
07-01-2009, 19:22
may i suggest you look at alternatives? a cz P01 would fit the bill. much better than the glock 19 imo.

choi_tan2000
07-01-2009, 19:29
just got mine yesterday bros
http://i115.photobucket.com/albums/n307/choi_tan2000/Image063.jpg


cz PO7

isuzu
07-02-2009, 19:55
hmm actualy bro tama ka it sells here separately in our country

If you don't mind me asking, how much is the gun store selling the decocker module?

choi_tan2000
07-02-2009, 21:32
sir isuzu di ko pa alam price, also havent seen one, i might surface pa on gunshow sir.

thanks

isuzu
07-03-2009, 19:04
sir isuzu di ko pa alam price, also havent seen one, i might surface pa on gunshow sir.

thanks

Thank you, and please keep us posted. :)

kcboy
07-04-2009, 04:22
Not sure I can wait 2 weeks to start the process.

Though if I get the P250 now, I wouldn't mind trying to find another handgun at the gunshow.

The one thing that might worry me about the P250 would be that some people have complained about light primer strikes. I probably wouldn't mind the longer trigger pull/reset.
Even though I've come from shooting Glocks (back in the States) I'll put in the amount of practice to get used to a new trigger.

BTW, can anyone here tell me if there's a limit to handgun purchases?
I'm hearing that if you join a gun club, there's no real limit to the number of licensed handguns you can have? Is this true?

Also, in regards to concealed carry permits, can you get 2 permits for 2 different handguns? (for example, I get a CCW for the P250, then I find it's a bit cumbersome, so I want to CCW a G26, assuming I can find one, of course) Do I have to wait for one to expire, then apply for the CCW for the other?

Thanks for everyone's input....

from personal experience, you can own as much as you can, but if you go over 10 firearms, there will be some slight problem, but nothing major, you can always fix it, if you know what i mean....:whistling:

as for the PTC(CCW in the U.S.), 1 ptc for each firearm, if you can afford to get PTCs for all your firearms, that is up to you. skies the limit....:cool:

meowr
07-04-2009, 10:22
Thanks for all the replies!

All your information has been very useful.

The only problem now, is that I'm seeing the S&W M&P 9mm Compact.

I'm reading up on it now....

There's a thread about one rusting that's holding me back.
And another thread about strikers breaking?
But "supposedly" these were of the early batches?

Is there anyone in BoG that has one? Does the humidity of the Philippines cause more rust? Any feedback of the batches we're getting here?

I'm going to purchase a handgun early this week...
and I'm really worried about "buyer's remorse"... so I don't want to get a "wrong" pistol.

So what do you guys thing? P250? M&P9C?
and a store says they're getting Glock G17's in a week or two... can I believe them? (I really miss my Glocks in the States... so I'm kind of attached to that brand...)

Allegra
07-04-2009, 18:17
guns dont rust kung parati mo hawak
Nagtatampo lang sila pag di mo pinapansin, kinakalawang

choi_tan2000
07-05-2009, 18:58
keep you posted sir isuzu

choi

markieboy
07-08-2009, 11:58
Heya everyone,
I was wondering if anyone can tell me where I can find a Glock G19 in Metro Manila?

The 19 is one of the best pistols I've shot. It is my personal choice for CCW. Yeah, I heard it's really tough finding any new Glocks in Philippines, especially the coveted 19. I'm sure you must be missing your Glocks from the States. Every gun shop I've been in here has at least one in every caliber. I hope you find what you're looking for, though.

Here's my baby:
http://img514.imageshack.us/img514/1373/glock.jpg

meowr
07-12-2009, 07:17
The 19 is one of the best pistols I've shot. It is my personal choice for CCW. Yeah, I heard it's really tough finding any new Glocks in Philippines, especially the coveted 19. I'm sure you must be missing your Glocks from the States. Every gun shop I've been in here has at least one in every caliber. I hope you find what you're looking for, though.



Yup, sure miss my babies back in the States....

I ended up ordering the S&W M&P 9mm Compact a few days ago.
It's quite a bit smaller than the Sig P250, so it will be better for carry, I guess...
Though now I need to order some decent holsters from the States.
I've been eyeing the SmartCarry for when I wear shorts here (since it's so hot all the time).
Anyone have any other recommendations?
Any recommendations for ankle holsters?

markieboy
07-12-2009, 17:02
I've been eyeing the SmartCarry for when I wear shorts here (since it's so hot all the time).
Anyone have any other recommendations?

I know what you mean. SmartCarry is really great. I bought one for my wife, she carries a G26, and it is very comfortable. If you wear an untucked shirt, you may find Don Hume OWB open top very practical. I've been wearing that, as it rides high and tight.