Sling for Mossberg 930SPX [Archive] - Glock Talk

PDA

View Full Version : Sling for Mossberg 930SPX


pntblnk
09-08-2009, 11:23
Wanting to attach a single point sling on my SPX and have seen the AR type rings that fit between the stock and the gun, but it says they are only for the 590. I contacted GG&G, but they won't have the SPX model until later in the year.

Any other options out there?

Bowtie
09-10-2009, 11:18
tagged for responce.

pntblnk
09-10-2009, 18:38
Shocked this is dead... I contacted GG&G and they say that they should have one sometime later this fall. Hoped that the 590 would fit but not the case. :crying: Need / Want one NOW!

JasonNC
09-11-2009, 17:23
Urban-Ert has a type of weapon adapter that works with the 930 or any standard buttstock shotgun for a sling point solution.

I just have a national match 2 point on mine though.

Big A
09-12-2009, 23:11
http://www.mesatactical.com/index.php?id=60

I recomend 1 of these. I have one on my 500 and love it. Iplan to get a 930SPX and put one on it aswell. It replaces the trigger housing pin.

They also are the only ones making a side saddle for the 930 too.

JasonNC
09-13-2009, 06:48
http://www.jerzeedevil.com/gallery/files/1/8/spx2.jpg

:goodpost:

threefeathers
09-13-2009, 08:55
I love the idea of GGG putting out a product. This company makes only superior products.

pntblnk
01-12-2010, 19:27
Still trying to chase this one down and wanted to share the latest. :popcorn::popcorn::popcorn:


Wed 12/9/2009 1:29 PM
Close. In jan sometime

Brant Sabau
Sales Director
GG&G, Inc.
Ph:520-571-6018
Fax;520-748-7583


Sent: Sat, Dec 5, 2009 9:38 pm
Subject: FW: Q about Mossberg Sling mount

<STYLE>#AOLMsgPart_2_6ab40a87-75f4-4346-a779-71317276da2e td{color: black;} @#AOLMsgPart_2_6ab40a87-75f4-4346-a779-71317276da2e font-face {font-family:Helvetica; panose-1:2 11 6 4 2 2 2 2 2 4;}@#AOLMsgPart_2_6ab40a87-75f4-4346-a779-71317276da2e font-face {font-family:Tahoma; panose-1:2 11 6 4 3 5 4 4 2 4;} #AOLMsgPart_2_6ab40a87-75f4-4346-a779-71317276da2e p.MsoNormal,#AOLMsgPart_2_6ab40a87-75f4-4346-a779-71317276da2e li.MsoNormal,#AOLMsgPart_2_6ab40a87-75f4-4346-a779-71317276da2e div.MsoNormal {margin:0in; margin-bottom:.0001pt; font-size:12.0pt; font-family:"Times New Roman";}#AOLMsgPart_2_6ab40a87-75f4-4346-a779-71317276da2e p.MsoHeader,#AOLMsgPart_2_6ab40a87-75f4-4346-a779-71317276da2e li.MsoHeader,#AOLMsgPart_2_6ab40a87-75f4-4346-a779-71317276da2e div.MsoHeader {margin:0in; margin-bottom:.0001pt; font-size:12.0pt; font-family:"Times New Roman";}#AOLMsgPart_2_6ab40a87-75f4-4346-a779-71317276da2e p.MsoFooter,#AOLMsgPart_2_6ab40a87-75f4-4346-a779-71317276da2e li.MsoFooter,#AOLMsgPart_2_6ab40a87-75f4-4346-a779-71317276da2e div.MsoFooter {margin:0in; margin-bottom:.0001pt; font-size:12.0pt; font-family:"Times New Roman";}#AOLMsgPart_2_6ab40a87-75f4-4346-a779-71317276da2e a:link,#AOLMsgPart_2_6ab40a87-75f4-4346-a779-71317276da2e span.MsoHyperlink {color:blue; text-decoration:underline;}#AOLMsgPart_2_6ab40a87-75f4-4346-a779-71317276da2e a:visited,#AOLMsgPart_2_6ab40a87-75f4-4346-a779-71317276da2e span.MsoHyperlinkFollowed {color:purple; text-decoration:underline;}#AOLMsgPart_2_6ab40a87-75f4-4346-a779-71317276da2e span.emailstyle19 {font-family:"Times New Roman"; color:windowtext; font-weight:normal; font-style:normal; text-decoration:none none;}#AOLMsgPart_2_6ab40a87-75f4-4346-a779-71317276da2e span.EmailStyle20 {font-family:"Times New Roman"; color:blue; font-weight:normal; font-style:normal; text-decoration:none none;}@#AOLMsgPart_2_6ab40a87-75f4-4346-a779-71317276da2e page Section1 {size:8.5in 11.0in; margin:1.0in 1.25in 1.0in 1.25in;}#AOLMsgPart_2_6ab40a87-75f4-4346-a779-71317276da2e div.Section1 {page:Section1;}</STYLE>I spoke with one of your folks several months ago about the single point sling mount. At that time the 590 version would not work for the 930SPX but you all were working on one for the 930 and expected it to be out near year end. Can you give me an update on where you are at in the development process?


Saturday, September 05, 2009 9:06 PM
To: 'gggaz@aol.com'
Subject: Q about Mossberg Sling mount

Will the rear single point sling mount, part # GG1284 or the GG1132 fit the Mossberg 930SPX? If not, do you have one that will?

Glockguy
01-26-2010, 19:34
For the record, I was also wanting a singlepoint plate when I read your post but wasn't having any luck in finding and did not want to modify my stock. So I began searching and originally located this on AR15.com: and then conducted other searches about the same unit to find positive comments. I made a PayPal purchase ordering the hook (loop) plate. It was shipped quickly and within a few days of order I had installed a made for 930 SPX exact fit unit of which I am totally satisfied. In fact, I responded by e-mail to the seller's inquiry in regard to my receipt and satisfaction as follows: "Although I tried, it would not fit my 500 (I also was hoping it would also fit a 500) but it fit my 930 SPX perfectly! Your fine product serves as a perfect yet discrete platform for delivering the wide range of attributes sought through my singlepoint option preference: unobtrusive mobility, superior balance in carry and formidable ease in weapon handling. Thanks for shipping so quickly!" If you are interested, the seller has a website at: http://actacticalgear.goods.officelive.com/default.aspx

2 Hawks
02-05-2010, 20:23
For the record, I was also wanting a singlepoint plate when I read your post but wasn't having any luck in finding and did not want to modify my stock. So I began searching and originally located this on AR15.com: and then conducted other searches about the same unit to find positive comments. I made a PayPal purchase ordering the hook (loop) plate. It was shipped quickly and within a few days of order I had installed a made for 930 SPX exact fit unit of which I am totally satisfied. In fact, I responded by e-mail to the seller's inquiry in regard to my receipt and satisfaction as follows: "Although I tried, it would not fit my 500 (I also was hoping it would also fit a 500) but it fit my 930 SPX perfectly! Your fine product serves as a perfect yet discrete platform for delivering the wide range of attributes sought through my singlepoint option preference: unobtrusive mobility, superior balance in carry and formidable ease in weapon handling. Thanks for shipping so quickly!" If you are interested, the seller has a website at: http://actacticalgear.goods.officelive.com/default.aspx

Thanks that's what I've been looking for..

2 Hawks
03-09-2010, 21:27
I called Craig and ordered the sling mount. He was prompt and wanted to know how it worked out. It's a quality made mount, fit was spot on. I would have preferred it a little smaller but it works fine as is..http://actacticalgear.goods.officelive.com/default.aspx
Here is my M930 with the sling attached. Only other mods being the Vang Comp safety and front sling option I already had. The Magpul sling works great.
http://img408.imageshack.us/img408/1492/dsc0281tx.jpg
http://img705.imageshack.us/img705/4577/dsc0285r.jpg