LWD 9G Carbine [Archive] - Glock Talk

PDA

View Full Version : LWD 9G Carbine


LWD Armorer
09-11-2009, 12:47
Here is a LWD 9G Carbine with a CMMG upper. What do you guys think?
Link to YouTube: http://www.youtube.com/watch?v=jA41Z6xKTQ4


Just in case you wanted to know. That is a G23 lower with a LWD-SLIDE35, LWD-239XL Barrel, and LWD-DC1 Dust Cover.
This is my personal LWD gun.

http://i142.photobucket.com/albums/r98/glockm_35/DSC02523.jpg

ab4ka
09-11-2009, 12:58
very nice!

billyj571
09-11-2009, 13:02
kool looking nice job.

Archer-one
09-11-2009, 16:11
That must be the pistol that you were switching magazines with....that was pretty cool. I think from a vesatillity/interchangablity stand point it's just plain awesome!

I need one in 10mm :supergrin:

Poor Knight
09-12-2009, 14:46
Are they available for purchase yet?

LWD Armorer
09-13-2009, 14:16
Are they available for purchase yet?


The ones available were on our E-Mail blast last week, without blinking an eye we were sold out. More are on the way and will be back in stock soon. Here is a link to the complete receivers and the stripped. Next week I should have the ďpistolĒ receivers, both stripped and complete will be available.

http://www.lonewolfdist.com/Products.aspx?CAT=288

jimbob.M27
09-13-2009, 14:45
Great idea. One question, In the Email I got. It says a bolt modification is required for use with CMMG and Colt 9mm uppers. So what kind of modification is needed for it to work?

BMG22
09-13-2009, 16:23
Where could I find a .40 S&W upper for it?

Fireman1291
09-13-2009, 16:31
Great idea. One question, In the Email I got. It says a bolt modification is required for use with CMMG and Colt 9mm uppers. So what kind of modification is needed for it to work?


Waiting for that answer as well.

LWD Armorer
09-14-2009, 14:14
This is the best I can get you guys for now. I will have the drawing from my machinist soon. I hope from the photos the modification doesnít look that difficult. I watched my machinist do it; it took about 10 min. from start to finish.

BMG22,
I donít know if anyone makes a 40S&W upper. We are having our own uppers in 9mm, 40S&W, and 357SIG being built now. I do not have an ETA on them.


http://i142.photobucket.com/albums/r98/glockm_35/BoltPhoto.jpg

http://i142.photobucket.com/albums/r98/glockm_35/MagPhoto.jpg

ronin.45
09-14-2009, 14:26
I currently run a RRA 9mm AR. If I purchased the stripped lower from LWD
would I need to make any other modifications for it to run properly?

I have been waiting for the MSAR 9mm bullpup, but this would be an even better setup since my RRA is already on hand and tricked out.

Thanks Ronin.45

Archer-one
09-14-2009, 15:57
To the top.

BMG22
09-14-2009, 19:10
LWD Armorer,
If you need a beta tester when you get them, sign me up! I really like the idea of a rifle/carbine like this that takes my Glock mags. Will yours have the carry handle like Olympics or the flat top?

Poor Knight
09-15-2009, 08:46
Are there any plans for LWD to offer modified RRA/Colt bolts? Or completer 9 mm carbines? I ask because I plan on getting a 9mm suppressed SBR next year like this: http://www.ar15-ar15.com/PhotoDetails.asp?ShowDESC=N&ProductCode=RRA9MMA4SBRS and it would be great to be able to feed it Glock mags.

glock22357
09-15-2009, 14:49
I really like the idea of a rifle/carbine like this that takes my Glock mags.

I really like the idea of a GLOCK that takes my M16/AR-15 mags.....that'd be even better!!!!

Oh wait.....that would be a GLOCK carbine.












Never mind.....

Carnage
09-16-2009, 17:47
Awesome!
When will you guy get the complete uper for sale? I'm looking at your page right now but no 9mm upper

LWD Armorer
09-17-2009, 16:06
Ronin.45,
I have someone sending me a RRA bolt, should have it next week. About 90% sure the bolt is the only modification.

BMG22,
I would say the uppers are going to be flat tops. I am not much of an AR guy; if you wanted the carry handle donít they make one that will mount onto a flat top?

Poor Knight,
All of LWD uppers (no ETA) will come threaded for suppressors. I am 99% sure we will offer SBR uppers as well. If you have a different upper, you can send us the bolt and have the modification done.



Complete Pistol Receivers Available. Check out the link below.

http://www.lonewolfdist.com/Products.aspx?CAT=288

ronin.45
09-17-2009, 17:00
If you could update when you get the RRA bolt it would be appreciated.

BMG22
09-19-2009, 11:58
BMG22,
I would say the uppers are going to be flat tops. I am not much of an AR guy; if you wanted the carry handle donít they make one that will mount onto a flat top?


Yeah that's what I'm talking about. The only pistol cal upper I found online (a 9mm from Olympic) seemed to have the fixed carry handle. I could be completely wrong though.

keninnavarre
09-19-2009, 14:32
[QUOTE=LWD Armorer;13801719]Ronin.45,
I have someone sending me a RRA bolt, should have it next week. About 90% sure the bolt is the only modification.


It would be great if you guys offered a modified bolt...:wavey:

JohnH
09-19-2009, 15:42
Hey, AR-15 aficionados, could you run a .22lr upper, .22lr conversion bolt, and Advantage Arms .22lr mags? This would be awesome! If not, LWD you need to make one!

duncan
09-21-2009, 11:36
Would love a 357 sig upper!!!!!!:wow:

Archer-one
09-22-2009, 16:41
Would love a 357 sig upper!!!!!!:wow:

I'm pretty sure that Dan told me that there would be 9mm, 357 sig and .40 S&W complete carbines available soon, all using the same lower. That's why the lower receivers are stamped "9G multi cal".

19Delta
09-25-2009, 12:24
For you guys wanting .357Sig & .40 Uppers, do you plan to run the "Asian" Stick Mags? I think an SBR in .357Sig would be Da Bomb!

LWD Armorer
09-25-2009, 16:48
Ronin.45,
The RRA bolt was identical to the CMMG. Same bolt modification.

Keninnavarre,
The bolt modification doesnít do anything against your original conversion. Why buy another bolt? Would that not be a waist of money? Make the bolt modification, no matter what conversion you go with, the same upper and bolt go with what ever lower you want to use.

JohnH,
Doing everything we can do supply the lowers. Working one the 9mm, 40S&W, and 357sig uppers. The 22cal uppers will fit in some day.

Archer-one,
Correct. Like I said before, trying to fill the demand. Sorry about any wait.



I am building some more lowers this weekend. Should have some back in stock next week.

Suburban
10-19-2009, 10:34
Will these lowers lock the bolt open after the last round is fired?

duncan
10-20-2009, 00:51
So you still need an Oly Arms Upper?

LWD Armorer
10-20-2009, 09:45
Suburban,
The ones we have sold no. We are working on some now that will.

Duncan,
Oly Arms, Rock River Arms, CMMG, or Colt. Soon will be LWD.

Suburban
10-20-2009, 23:23
Suburban,
The ones we have sold no. We are working on some now that will.


Ahh, okay. Thanks. Will stay tuned.

duncan
10-28-2009, 01:06
Suburban,
The ones we have sold no. We are working on some now that will.

Duncan,
Oly Arms, Rock River Arms, CMMG, or Colt. Soon will be LWD.

What about us big boys that shoot 10mm or 45 ACP?

Oly makes uppers for those rounds too.

Have an order in for a 10mm upper right now.

Any plans for LWD lowers to accept G20 or G21 mags?

LWD Armorer
10-29-2009, 17:00
Duncan,
Yes, we will be working on 10MM and 45 ACP lowers soon. I do not think they will be ready for SHOT. I my self can not wait to own a 10MM LWD carbine.

Archer-one
12-17-2009, 15:02
ttt :cool::cool::cool:

LWD Armorer
12-23-2009, 11:26
More are back in stock. Some have asked when! Well here they are. Ö They are not coming in as fast as I like but more are to show up next month. If you put one on back order your delay should be short.

http://www.lonewolfdist.com/Detail.aspx?PROD=1805

Archer-one
01-11-2010, 17:29
I just received my Spike's Tactical 9mm upper today, I'm stoked to get it running.

Carnage
01-22-2010, 12:09
I'm wondering. Will this LWD Lower work with Oly .22rl Upper and a AA arms .22rl Mag?

Archer-one
02-01-2010, 17:58
I'm wondering. Will this LWD Lower work with Oly .22rl Upper and a AA arms .22rl Mag?


That's a flipping good question! I would like to know the answer to this one.....HELLO, DAN....are you out there???:wavey:

I snapped on my Spike's top end last week and got to bang off some rounds this last weekend......all I can say is that it brings a smile to my face! I even loaded a couple of 9mm shot shells and got it to cycle, which I didn't expect it to. I figure it would have to be shot singly. The second round just almost made it out of the ejection port so, no I wouldn't load up a full mag and expect it to cycle 100%...but I don't care! It was all fun anyway.

IBreakStuff
02-03-2010, 13:51
Duncan,
Yes, we will be working on 10MM and 45 ACP lowers soon. I do not think they will be ready for SHOT. I my self can not wait to own a 10MM LWD carbine.


Thats freaking awesome :supergrin:

SirIsaacNewton
05-22-2010, 21:19
Any new info on this carbine or when the Last Round Hold Open will be put in place?