suggestions for 10mm reloading manual? [Archive] - Glock Talk

PDA

View Full Version : suggestions for 10mm reloading manual?


peapadamoose
03-13-2010, 11:35
Hey guy was looking for a good updated reloading manual for 10mm. Any suggestions would help. Thanks.

10mm29
03-13-2010, 13:58
Everything is online, just go to the powder companies websites.

Taterhead
03-13-2010, 15:38
I wonder if your question is about reloading or about load recipes. If you are looking for a manual about reloading, I like the latest from Speer (#14) and Hornady (don't remember the issue #).

If it is about recipes then I suggest getting a Loadbooks - not necessarily the latest recipes because the powder manufacturers' data has mostly been updated. As 10mm29 mentioned, current recipe data is online from the powder co's. I haven't noticed much movement in the projectile manufacturer data except Speer. I think Loadbooks is missing data for the 165 gr GDHP. I don't notice any changes to the Hornady recipes.

MinervaDoe
03-19-2010, 13:34
If it is about recipes then I suggest getting a Loadbooks - not necessarily the latest recipes because the powder manufacturers' data has mostly been updated.

This is printed on cheap looking paper, but it gives you a manual which combines most of the reloading manuals out there into one book: Loadbooks USA "40 S&W and 10mm Auto" Reloading Manual
http://www.midwayusa.com/viewProduct/?productNumber=414298

Basically, it looks like they simply xerox'ed pages from a bunch of manuals. It's not pretty, but it puts a lot of data at your fingertips for $6.99

Kegs
03-19-2010, 16:06
http://guitarsalon.biz/10mm/hornady.htm

I use this at my own risk and I would suggest you might too.

preventec47
06-07-2010, 09:30
I think we all here should contribute to and create our own LoadBooks
type loading manual by inputting the recipes we have from the many
older and newer manuals that we have.

Very simply, we just create a Sticky for each bullet weight range
and then we all simply input the data we have.
Heck, I think I have at least 80 percent of all the relevant
data and could start it off if moderators agree.

Scott

MinervaDoe
06-07-2010, 22:09
Somebody already did it. It's $6.99.

http://www.midwayusa.com/viewProduct/?productNumber=414298

preventec47
06-08-2010, 02:18
Somebody already did it. It's $6.99.

http://www.midwayusa.com/viewProduct/?productNumber=414298

Not saying the data in it is not any good but the data in it
is now seven years old as it was compiled with data available
in 2003 and only for which permission was granted to use.

We could do a lot better.

MinervaDoe
06-08-2010, 03:38
I think we all here should contribute to and create our own LoadBooks
type loading manual by inputting the recipes we have from the many
older and newer manuals that we have.
I did something similar for 9mm. But, I only asked for a single data point (the most accurate load). When the thread slowed down, I did a summary post. http://glocktalk.com/forums/showthread.php?t=1211390

Midway used to publish their own load book. It was kind of conservative, but it had a ton of loads.

ctkelly
06-08-2010, 19:56
I suggest quickload.

cwb
06-10-2010, 13:53
Not saying the data in it is not any good but the data in it
is now seven years old as it was compiled with data available
in 2003 and only for which permission was granted to use.

We could do a lot better.
I'd rather have that. Manuals get more conservative over time.