G21st ambi safety sticking [Archive] - Glock Talk

PDA

View Full Version : G21st ambi safety sticking


apxpred
05-04-2010, 14:36
All of a sudden the ambi mag release on my G21sf is sticking, and bad. Took it out, wiped it down & still the same issue. Cut the weak side protrusion off, lightly polished the the entire safety, same problem. I remember reading about the issue a while back can't find any remedy. I'm thinking poor design, any insight appreciated. Would glock issue me a different frame ? this is now a paperweight. Thanks

ETA : From what I read Glock will replace the frame w/ a std. mag. release version.
ETA#2 : Good catch Njanear got my head in the AR, can't edit the title soooooo I'm a dork LOL !

Njanear
05-04-2010, 19:30
Before you catch all sorts of grief:

Guys, he meant MAG RELEASE and not SAFETY!! :whistling:

21Glock
05-09-2010, 15:14
All of a sudden the ambi mag release on my G21sf is sticking, and bad. Took it out, wiped it down & still the same issue. Cut the weak side protrusion off, lightly polished the the entire safety, same problem. I remember reading about the issue a while back can't find any remedy. I'm thinking poor design, any insight appreciated. Would glock issue me a different frame ? this is now a paperweight. Thanks

ETA : From what I read Glock will replace the frame w/ a std. mag. release version.
ETA#2 : Good catch Njanear got my head in the AR, can't edit the title soooooo I'm a dork LOL !

Mine was mag dumping about 2 months ago. Fire a shot dump a mag. Not good.
I heard here on GT that Glock will exchange the ambi-mag release frame for a standard release frame. Which is what they did for me. That's one of the advantages of living here in the Atlanta area. Glock's HQ in Smyrna is about 30 miles from my front door. I went over there back in the March. Gave them my ambi-mag release frame. 45 minutes later, tech guy comes out with a new standard mag release frame 21SF. No charge. Problem solved. They know of the problem with the ambi-mag releases. Call them up. They will probably do the same deal for you.

To Arms!!
05-12-2010, 00:27
My G-21SF is in the shop now. With rounds in the mag (6 or more) it takes both thumbs to release mag.

Wakko
05-14-2010, 09:54
http://glocktalk.com/forums/showthread.php?t=1192572

I stuck the 21 in the night stand and carry an HK45 now. Never looked back.

BleedNOrange
05-14-2010, 11:28
Mine was trouble free for the longest and I even posted such. Recently I did have problems. I sent the frame to Glock and they sent me a reg release one in exchange. Problem solved

Wakko
05-14-2010, 11:30
What'd it cost you to ship the frame back to Glock? Do you now have a non matching gun?

To Arms!!
05-16-2010, 15:28
Cost me $57.49 to ship my G21SF to Glock by FedEx Priority Overnight.

WakkoSS
05-16-2010, 18:10
That's a bunch of crap. Glock should pay for the ride since it's THEIR design flaw.

ToastandJam
05-17-2010, 09:35
How did you take it apart to clean it? Looking at the ambi mag release compared to a standard one, the parts of different and don't seem to pop out.

To Arms!!
05-21-2010, 23:54
I got my G21SF back from Glock. It was shipped to them on April 28 by Fed Ex and was returned to me on May 21. The cost for me to ship it was $57.49.

I indicated to Glock that I was having problems operating the ambidextrous magazine release button.

According to the packing list, Glock "inspected and replaced the frame, magazine catch, spring, slide stop lever locking block pin, connector and cleaned".

Actually they returned my original slide assembly and replaced the frame with the traditional magazine release button and replaced all parts contained in the frame. Of course, the frame has a different s/n than the frame that I sent in to them.

There are some differences in the new frame as compared to my old frame. There is not a lanyard hole in the new frame. There is a 7/16" shiny square on the forward bottom portion of the trigger guard. I had purchased a trigger, trigger spring, connector, and triger housing from Glockmeister to drop in when I got my gun back. But it would not drop in. Upon further inspection, the trigger housing was different than the one that came in my new frame. I suspect that the trigger housing that I got from Glockmeister was for a G21 as the bottom of the trigger housing below the pin hole was shaped differently.

Glock also shipped my gun back to me in a Glock clamshell style box with a new cleaning rod, brush and the Important Safeguards envelope.

Off to the range this weekend to see how it shoots

TangoFoxtrot
05-29-2010, 01:43
G21sf ambi safety sticking ; Clean and lube it before you take any other option.

ToastandJam
05-30-2010, 02:59
Anyone know where one could obtain replacement parts (that are in stock) to self-repair/replace and not have to send in and lose SN?