View Full Version : G36, top round contact with ejector at insertion
The title of the thread pretty much describes the issue.
As there is contact with the ejector by the top round prior to the 'click', I am real reluctant to forcefully insert a fresh mag from slidelock.
There is a part number on the ejector. It is 8196-2.
What is the fix?
No problem. The contact is along the side of the cartridge. Contact at this point is harmless
Contact is on the rim...about 10-11 o'clock. It isn't on the side. The contact is such that that a piece of std paper can not be pulled through w/o tearing. Briefly, it isn't just touching the ejector but applying pressure.
Any chance you can provide a pic?
Nosir, none at all.
Its a loaded round that has forceful contact with the G36 ejector. The contact is on the rim.
Some GI 45s can do this. On them the fix is fairly simple.
I know next to nothing about Glocks.
This one is box stock with no bells or whistles attached.
A pic would tell me everything.
Unfortunately I can not recommend anything more than changing out the trigger housing and I am not really sure that will do anything?
Maybe a broken ejector? It does have a part/dwg number.
Is replacing the ejector within the capabalities of your average ten thumbed klutz?
The trigger housing has a new ejector. They are sold as a matched set, "TH & ejector".
Yah you could replace it if you wanted to however I suspect nothing will change. From what you have described I pretty much feel there is nothing wrong?
A pic would tell me everything. If your still concerned send me the gun for inspection.
vBulletin® v3.8.7, Copyright ©2000-2013, vBulletin Solutions, Inc.