slide stop lever [Archive] - Glock Talk

PDA

View Full Version : slide stop lever


FYRELT
07-07-2010, 12:39
can anyone tell me if a slide stop lever for the 19 or 23 will fit my 38,i want to replace the extended lever because my thumb hits it and the slide locks back.

roginoz
07-07-2010, 22:30
I have a 19 and a 38; the slide stops are interchangeable. I don't have any problem with the slide stop on the 38, though.

BOGE
07-07-2010, 23:26
In all seriousness you probably need to change your grip as the GAP has a wider slide thereby necesitating the extended slide stop.

dragonmalice
07-09-2010, 19:30
I had the same problem - I just used a Dremel to cut the extended portion off of the lever. It has worked great for nearly a year now, and I still don't have any trouble using it to lock the slide back normally (chamber checks) . It's harder to release the slide with it now, but I've never used it for that anyhow.

It may well be possible to train to the point where I won't make a mistake if the time comes, but I decided not to chance it on something that I know is an issue (for me).

MSgt Dotson
07-10-2010, 00:53
per lwd's parts listings, the 36/37/38/39 use a uniquely sized/dimensioned slide stop lever, allegedly not interchangeable...

Get the right part, fork out the $7.50... :)

ExiledViking
07-11-2010, 00:58
FWIW, I have swapped the slide stop off my G38 with my buddy's G19(which he used last weekend in the local IDPA match) and they both work fine. YMMV.

MSgt Dotson
07-11-2010, 02:18
Although it might work, GLock uses different part numbers for the slide stops for the 37/38/39 for a reason, I suspect...

DLL9mm
07-11-2010, 03:49
They are different parts numbers, BUT They do interchange. I changed the one on my G37 with a non-extended G19 slide stop. Worked fine.