Glock 35 and Missouri Bullet bullets

[jpdavis423]

I've got a new Glock 35 with a factory barrel. When I first got it I tried some polymer coated bullets. I had terrible leading at all velocities that would cycle the action. Since then I've only shot Montana Gold jacketed. I was thinking about getting some MO Bullets and trying them. I wanted to know if anyone else had used them in a .40 Glock (preferably a 35) and if you had any leading problems?

Thanks,

Jeff

[freakshow10mm]

Leading is a cause of bullet fit, powder choice, lube choice, and bullet sizing.

My suggestion is slug your bore, buy .001" over groove diameter, use WSF, and Missouri Bullet should be fine.

Stick to medium burn powder with lead, ie Unique, WSF, HS6, #5, etc.

I use Missouri Bullets in my commercial ammunition when it's too cold to cast my own. I've had great results and Brad runs a first class operation. Tell him Adam from Freakshow Mfg sent you.

[jpdavis423]

Thanks,

I've used Brad's bullets for several years in my S&W's and Colts and they have worked well. I especially like his 148 gr. DEWC for my .38's
All Brad's .40's are listed as .401". Are you saying that if my barrel is more than .001" different from that I should not buy Brad's bullets?

Jeff

[Colorado4Wheel]

Actually, if you barrel is more then .400 or your throat is .402" Those are general numbers. YMMV

[LoadedTech]

I load plated berry's and have no issues in .40 or 357/38. $100 shipped http://www.tjconevera.com/berrys-4010mm-180-.html

[MSgt Dotson]

I've used 155/180/185 gr moly Precision Bullets in my GLock 35's factory bbl; wether 50 or 250 rounds, the bore comes clean easily with 3-4 passes of CLP soaked-compressed paper towel wads...

[jpdavis423]

I've used 155/180/185 gr moly Precision Bullets in my GLock 35's factory bbl; wether 50 or 250 rounds, the bore comes clean easily with 3-4 passes of CLP soaked-compressed paper towel wads...

Thanks,

I tried their bullets in 9mm and they seemed to work fine. I don't remember if I tried their .40's or not.

I just ordered a LW barrel so I guess the question is (for me) moot now.

Jeff