dillion 650 ? [Archive] - Glock Talk

PDA

View Full Version : dillion 650 ?


shotgunred
10-13-2010, 15:46
On my 550 I can switch between 9mm and 40sw by changing the tool-head and the buttons. They use the same shellplate. Pull two pins and the powder reset bar and in two minutes you are loading the second caliber.

Do you use the same shell plate with the 650?
What different parts do you need to switch with the 650?
How much is it going to cost?

ZekerMan
10-13-2010, 16:24
Check BrianEnos.com and I believe your questions and prices would be answered.

Boxerglocker
10-13-2010, 16:35
You'll need a 650 conversion for the .40 and dies... The 650 unlike the 550 uses a different shellplate because of the circumference difference due to the larger diameter needed for the extra station. It can't be accounted for by simply changing the locator pins as in the 550 shell plate
The other conversion items a specifically for the casefeeder function and are necessary.
The spare toolhead is a convenience item, but to me a no brainer, get one.... you can use a small case feed palte for 9mm and .40

So giving you use your current dies the only things you absolutely need are the conversion itself if you already are set up with your 650 for 9mm.

Colorado4Wheel
10-13-2010, 16:44
It's in the manual. It will list the shellplate, locator pins and powder funnel you need.

shotgunred
10-13-2010, 18:16
I don't have a manual. I suppose I could download one. I am still trying to make up my mind if I want to buy a 650 or not.

Colorado4Wheel
10-13-2010, 18:19
Tought choice. Good luck.

Boxerglocker
10-13-2010, 18:51
Using your the dies you already have and moving your powder drop.

$75.95 for the .40 Conversion
$24.95 spare 650 Toolhead
$10.50 for Dillon Powder Die

$111.40 plus shipping, unless you buy it up front with your press set up for 9mm.