My SA Custom Carry [Archive] - Glock Talk

PDA

View Full Version : My SA Custom Carry


GJ1981
12-14-2010, 18:10
......is still not done.

















http://www.pattaya-addicts.com/forum/public/style_emoticons/default/Evil_Laugh.gif





But I did talk with the CS about something else and was told they received my CC back from Ionbond today. They just need to do the final assembly so I should have it by next week. Merry Christmas to me.

:supergrin:


Dave told me it looked awesome so I can't wait. Only took about 11 months start to finish.

glock2740
12-14-2010, 18:18
Cool deal. Can't wait to see it. :thumbsup:

awpk03s
12-14-2010, 18:23
Awesome! I can't wait to see it. I have really liked everything I've been seeing from SA Custom...

GJ1981
12-14-2010, 18:38
I made a few changes during this build, but I wanted it to be perfect. The only problem I had was getting the vertical rear serrations. I was told they didn't offer them, but then they could, then couldn't, etc. They eventually said they could do it as a custom slide so hopefully that will be true.



Final Specs:

Custom fit slide(GI Vertical serrations ) to national match frame
Custom fit match Kart barrel & EGW thick flange bushing and plug
Vickers action components(ring hammer)
10-8 flat trigger
EGW slide stop w/FBI nub
Tuned for total reliability
Pinned extended ejector
Extra Fitted extractor
GI recoil system
Custom fit beavertail grip safety tuned for max sensitivity
Extended thumb safety, non ambi
Low mount 10-8 U-notch (.140”) rear sight
Dovetail ramped front tritium sight w/white OL
Heinie Magwell opened to max
Chen MS housing
Ion Bond DLC entire pistol
“Golf Ball” Grip Treatment
“Radical Carry Bevel” complete pistol
10-8 mag release
Ball cuts












have really liked everything I've been seeing from SA Custom...

I do like what they can do, hopefully the storm cloud over my head calms down.

I am going to compare the Heinie MW to the Chen that's getting installed on my Baer.

Quack
12-14-2010, 18:46
Congrats!!!!

i call first dibs if you ever get rid of it :supergrin:

rsxr22
12-14-2010, 18:56
Those sound like some awesome specs! Congrats

proactive
12-14-2010, 19:09
Awesome specs, GJ. Looking forward to pics.

Alcoy
12-14-2010, 19:16
congrats.

don't let quack temp you to get rid of it. quack and bac are competing for the biggest 1911 collections.

Shipwreck-The-Sequel
12-14-2010, 19:16
I made a few changes during this build, but I wanted it to be perfect. The only problem I had was getting the vertical rear serrations. I was told they didn't offer them, but then they could, then couldn't, etc. They eventually said they could do it as a custom slide so hopefully that will be true.


Yes, Deb told me they could not do it. I wanted them over the regular serrations too

Quack
12-14-2010, 19:18
congrats.

don't let quack temp you to get rid of it. quack and bac competing for the biggest 1911 collections.

i my collection is small. i just like Springfield CUstom Shop guns and rare Springfields.

GJ1981
12-14-2010, 19:26
Congrats!!!!

i call first dibs if you ever get rid of it :supergrin:

Hopefully it won't come to that, but I still have another CC on order you could call dibs on. It is a simple build with Metaloy HC.


:tongueout:





Yes, Deb told me they could not do it. I wanted them over the regular serrations too


I was told no at first, but after numerous emails, Dave said it could be done. I just had to pay for the time? to change/set-up the mill to do the cuts.

I have been nervous on this, but since I paid the extra $, everything should be fine. If not, I may pop a blood vessel.

Hokie1911
12-14-2010, 19:33
Dude...Joe will pay twice as much as Don since it's HC. :rofl:

Congrats on a sweet build. Can't wait to see it.

Quack
12-14-2010, 19:34
nope, no HC for me :animlol:

Quack
12-14-2010, 19:34
Dude...Joe will pay twice as much as Don since it's HC. :rofl:

Congrats on a sweet build. Can't wait to see it.

yep, joe could call dibs on that one :rofl:

glock2740
12-14-2010, 19:38
Final Specs:

Custom fit slide(GI Vertical serrations ) to national match frame
Custom fit match Kart barrel & EGW thick flange bushing and plug
Vickers action components(ring hammer)
10-8 flat trigger
EGW slide stop w/FBI nub
Tuned for total reliability
Pinned extended ejector
Extra Fitted extractor
GI recoil system
Custom fit beavertail grip safety tuned for max sensitivity
Extended thumb safety, non ambi
Low mount 10-8 U-notch (.140”) rear sight
Dovetail ramped front tritium sight w/white OL
Heinie Magwell opened to max
Chen MS housing
Ion Bond DLC entire pistol
“Golf Ball” Grip Treatment
“Radical Carry Bevel” complete pistol
10-8 mag release
Ball cuts

SA's CS does golfballing? Any pictures?

GJ1981
12-14-2010, 19:40
SA's CS does golfballing? Any pictures?

These are the photos I was given when I asked about it.

http://www.glocktalk.com/forums/showpost.php?p=14698784&postcount=18

I like how Chuck's cover a greater area, but SA's seem well done.

Hokie1911
12-14-2010, 19:43
These are the photos I was given when I asked about it.

http://www.glocktalk.com/forums/showpost.php?p=14698784&postcount=18

I like how Chuck's cover a greater area, but SA's seem well done.

Hmmmmm that would look ubersexy on an EMP. :whistling:

Quack
12-14-2010, 19:44
Hmmmmm that would look ubersexy on an EMP. :whistling:

too bad you're not buying one :animlol:

Hokie1911
12-14-2010, 19:46
too bad you're not buying one :animlol:

Hmmmm, I'm just not buying yours. :tongueout:

Quack
12-14-2010, 19:50
changing your mind again? :animlol:

Honestly at this point, unless I got a sweet deal on an EMP...I am just going to stick to .45 and start reloading. Once I pay off the Brown, gonna sell the HK to cover my reloading setup and then start saving for a 5" Kobra. A month or so back I would have jumped at your EMP, but I like the idea of reloading.

glock2740
12-14-2010, 19:51
Hmmmmm that would look ubersexy on an EMP. :whistling:
Especially hardchromed. :tongueout:

Hokie1911
12-14-2010, 19:53
changing your mind again? :animlol:

Nope, just meant down the road. I really like the EMP. It would come after the Kobra Carry and the Kobra.

thecableguy
12-14-2010, 19:56
Nope, just meant down the road. I really like the EMP. It would come after the Kobra Carry and the Kobra,and the NN

Fixed it for you buddy

bac1023
12-14-2010, 19:57
Sounds great.

I'm looking forward to seeing it. :)

rsxr22
12-14-2010, 19:58
Is there a problem that before we even have our builds or guns we want, were already thinking about the next? LOL

Hokie1911
12-14-2010, 20:00
Fixed it for you buddy

Nah, I'm not so sure I would like the 15LPI on the NN. I didn't like Don's TRP that much and it's 20LPI. I think I am the only guy in here that doesn't care for the TRP. I'd rather get a SACS gun over the NN.

Shipwreck-The-Sequel
12-14-2010, 20:02
SA's CS does golfballing? Any pictures?

Deb told me that they can do any of the common textures - golfball and snakeskin included. I have never seen this finish done by Springfield. I have seen a golf balled springfield 1x - on a gunsmith's sight last week. But I forget what site. Anyway, that smith did it - not Springfield. But, apparently, they CAN do it.

thecableguy
12-14-2010, 20:05
Nah, I'm not so sure I would like the 15LPI on the NN. I didn't like Don's TRP that much and it's 20LPI. I think I am the only guy in here that doesn't care for the TRP. I'd rather get a SACS gun over the NN.

Wow I thought for sure the NN would be after the EB.

Hokie1911
12-14-2010, 20:11
Wow I thought for sure the NN would be after the EB.

Nope. Kobra Carry to EDC. Kobra w/Dawson rail for the house. Then a Remington 870 (perhaps 20ga)......then probably an EMP9 sent to SACS for some lovin'.

thecableguy
12-14-2010, 20:14
Nope. Kobra Carry to EDC. Kobra w/Dawson rail for the house. Then a Remington 870 (perhaps 20ga)......then probably an EMP9 sent to SACS for some lovin'.

As we all know in this place that will change next week.:tongueout: