Beneli Supernova Tactical Pump--light mount otions [Archive] - Glock Talk

PDA

View Full Version : Beneli Supernova Tactical Pump--light mount otions


ATL_GLOCK
01-04-2011, 12:53
Ok so I've seen this subject covered before but couldnt find a definitive answer from the previous threads....But what are the light mounts people are using here for those of us without the tube extension? I've looked at mesa tactical but cant figure out which one to buy. Also once you buy said light mount, what light are you sticking in it??

PLEASE HELP!!!! :dunno:

triggerjerk
01-04-2011, 14:09
Most are using the extension to clamp things onto.

You could try something like this attached to the barrel:

http://www.******tactical.com/kz3rashtumo.html

Most lights are 1" in diameter. Some, like the streamlights are .9" and require a spacer.

You might head on over to:
http://www.benelliusa.com/forum/forumdisplay.php?f=17

BBJones
01-04-2011, 14:50
Mesa makes a barrel clamp version (no extension required). I have no experience with it though.
On page 15 of their downloadable catalog. http://www.mesatactical.com/index.php?id=102

ATL_GLOCK
01-05-2011, 09:29
Most are using the extension to clamp things onto.

You could try something like this attached to the barrel:

http://www.******tactical.com/kz3rashtumo.html



I've seen that clamp but it attaches to the mag tube...not the barrel...and since I have a ghost site i dont see that going on my barrel...oh also I dont trust ****** tactical....waayyyyy too many negative things and complaints filed against them

ATL_GLOCK
01-05-2011, 09:32
Mesa makes a barrel clamp version (no extension required). I have no experience with it though.
On page 15 of their downloadable catalog. http://www.mesatactical.com/index.php?id=102

i've seen that...but it says for a remi 870...


I just dont know..i'm banging my head against the wall on this one.:brickwall:

ATL_GLOCK
01-05-2011, 13:50
looks like SRM makes one as well...little bit more expensive than the nordic ext.....basically as expensive as the benelli factory extension tube...but god knows where i can find one of those..gonna keep looking before i drop $100 on an SRM ext and a another $70 on the mesa tactical mount and another $100 on a surefire with grip activator....

BBJones
01-05-2011, 15:01
If you are going to get an extension tube get a nordic. From everything I've heard the factory benelli tubes are not as good, aside from being impossible to find.

I would call Mesa on the barrel clamp. They list it for an 870 but I am 99% sure it will work on SNT. I think they also list their tube/barrel clamp as being for an 870.

Now I am curious. I am going to get a Nordic extension and was planning on using a Mesa tube/barrel clamp for light and sling. I guess I will inquire about that.

ATL_GLOCK
01-05-2011, 17:31
If you are going to get an extension tube get a nordic. From everything I've heard the factory benelli tubes are not as good, aside from being impossible to find.

I would call Mesa on the barrel clamp. They list it for an 870 but I am 99% sure it will work on SNT. I think they also list their tube/barrel clamp as being for an 870.

Now I am curious. I am going to get a Nordic extension and was planning on using a Mesa tube/barrel clamp for light and sling. I guess I will inquire about that.

Where are you ordering your nordic extension? I haven't found anywhere with it in stock

dreis454
01-05-2011, 17:35
Ok so I've seen this subject covered before but couldnt find a definitive answer from the previous threads....But what are the light mounts people are using here for those of us without the tube extension? I've looked at mesa tactical but cant figure out which one to buy. Also once you buy said light mount, what light are you sticking in it??

PLEASE HELP!!!! :dunno:

Just use whatever they have @ your local 7-11 next at the end of the snack isle.:rofl:

ATL_GLOCK
01-05-2011, 19:42
Just use whatever they have @ your local 7-11 next at the end of the snack isle.:rofl:
I went but they were fresh out!

BBJones
01-05-2011, 20:41
Where are you ordering your nordic extension? I haven't found anywhere with it in stock

http://shop.nordiccomp.com/NC-Shotgun-Extension-Complete-Assemblies-for-12ga-12GA-EXT.htm

just ordered two +2 extensions and two low drag followers.

ATL_GLOCK
01-06-2011, 09:39
http://shop.nordiccomp.com/NC-Shotgun-Extension-Complete-Assemblies-for-12ga-12GA-EXT.htm

just ordered two +2 extensions and two low drag followers.

think the factory followers are no good?

BBJones
01-06-2011, 15:43
think the factory followers are no good?


TBH - I don't know (shocking on an internet gun forum, I know). I kind of bought their hype saying that their follower was made to better function with their extension tube. I know it is a common problem for stock followers to get hung up on aftermarket extensions. I wanted metal followers anyways. I might paint the visible portion a bright color to better see it when the tube is empty.