.22 conversion kits. [Archive] - Glock Talk

PDA

View Full Version : .22 conversion kits.


okie
06-13-2011, 12:34
I have a Kimber .22 conversion kit, and from a simplistic point of view it appears to be the best of all the conversion kits. I was thinking about getting either a Marvel or an Advantage Arms unit because they lock back after the last shot. There aren't any really good videos I could find, but it appears the Kimber is the only one that needs no special tools to install. The Marvel unit has it's own slide stop which is a two piece and once the slide is on you have a special wrench you turn on the guide rod I believe. The Advantage Arms kit also requires a special tool to install. With the Kimber kit you use the slide stop from your pistol and there are no special tools needed. I like things simple, so I believe I will stick with the Kimber and live with it not locking back:supergrin:

CMG
06-13-2011, 12:42
okie,

I've been happy with my Kimber kits, but the easiest way to enjoy them is to give them their own frame! :supergrin:

Kimber Rimfire Target .17 on a Colt XSE frame
http://i19.photobucket.com/albums/b175/pb9x19/KRFT17m.jpg

Kimber Rimfire Target .22 on a Taurus PT1911 frame
http://i19.photobucket.com/albums/b175/pb9x19/KRFT22rev3.jpg

knedrgr
06-13-2011, 13:47
that slide is MIM. :rofl:

skipsan
06-13-2011, 14:06
Just a comment on the Marvel kit. Mine is a Marvel design (has a Bob Marvel roll-mark), apparently made by Advantage Arms, has a US Palm logo on the slide, and is sold as a complete pistol on a Caspian frame by Scottsdale Gun Club with a SGC serial number.

All of that BS aside, it does take a "special" tool to torque up the guide rod, but it's a simple allen socket, and not very "special" given that the cleaning interval is measured in thousands of rounds. Not proud of that, just being honest. The guide rod does require blue Loctite to stay tight, or the darn pistol will dissassemble itself without much warning. Again, not a big deal, but a consideration. Mags are cheap--$25 from Advantage--and once the quirks of the thing are figured out, a nice piece of equipment, the only drawback being the aluminum Marvel design on the aluminum Caspian frame make for a very light pistol, and not very representative of a 1911.

doc540
06-13-2011, 15:07
special tools??

Marvel Commander conversion kit serial number CA0001 C
http://img.photobucket.com/albums/v334/doc540/Guns/1911/22%20Conversion/Marvel/DSCN3029-1.jpg

Lock down the quide rod and forget about it

http://img.photobucket.com/albums/v334/doc540/Guns/1911/22%20Conversion/Marvel/DSCN3027-1.jpg

prefers CCI Stingers

okie
06-13-2011, 16:16
special tools??

Marvel Commander conversion kit serial number CA0001 C
http://img.photobucket.com/albums/v334/doc540/Guns/1911/22%20Conversion/Marvel/DSCN3029-1.jpg

Lock down the quide rod and forget about it

http://img.photobucket.com/albums/v334/doc540/Guns/1911/22%20Conversion/Marvel/DSCN3027-1.jpg

prefers CCI Stingers

The video I saw you had to tighten down the guide rod with a hex wrench:headscratch:
Also it says in the product info there is a take down tool.

doc540
06-13-2011, 19:14
The video I saw you had to tighten down the guide rod with a hex wrench:headscratch:
Also it says in the product info there is a take down tool.
Yep. A little hex. Nothing special.

Here's a pic of the whole kit:
http://img.photobucket.com/albums/v334/doc540/Guns/1911/22%20Conversion/Marvel/DSCN0003-1.jpg

Slide lock pin is just like a standard 1911.

I had them send me a red, fiber optic like I use on the 9mm.

And it's ammo picky: CCI Stingers run like a Deere.

Quack
06-13-2011, 20:56
Wilson/Marvel kit here.
Had a Kimber and it wouldn't make it on my TRP (only 1911 I had at the time)
Had a Wilson/Ciener and it was very picky on ammo, and still didn't run 100%.
The Ciener (as well as the Kimber) doesn't work with 9mm frames (without filing down the ejector) or ramped barrel frames.
The Marvel design works with both. I like the fixed barrel design, which is why the guide rod needs to be screwed down for assembly.

FLIPPER 348
06-13-2011, 21:12
my Kimber conversion happily eats all but the cheapest bulk ammo

doc540
06-13-2011, 21:13
my Kimber conversion happily eats all but the cheapest bulk ammo

cheap fun, ain't it?:cool:

okie
06-14-2011, 06:57
I think I will stick with my Kimber, even if it don't lock back on last round. I like the idea of not having any special tools to assemble/disassemble your pistol:thumbsup:

FLIPPER 348
06-14-2011, 07:11
Okie, the way we Kimber conversion guys get around the slide not locking back when we run the course is to load a Stinger into the mag as the 2nd round. When the recoil of the Stinger is felt you know there is one in the chamber and the mag is empty. ...mag swap and rock on!

okie
06-14-2011, 07:15
Okie, the way we Kimber conversion guys get around the slide not locking back when we run the course is to load a Stinger into the mag as the 2nd round. When the recoil of the Stinger is felt you know there is one in the chamber and the mag is empty. ...mag swap and rock on!

That's a good idea, my friend:thumbsup:

FLIPPER 348
06-14-2011, 07:22
its a take-off of an old trick from the Army days of loading a tracer as the 2nd round in the M16 mag



Either way, write a check to the grumpy old guy at Cliner and get yourself some non-plastic 15 round magus for your Kimber. ...they will eventually show up!!