Glock 19 Gen 4 problems [Archive] - Glock Talk

PDA

View Full Version : Glock 19 Gen 4 problems


red_eagle
07-21-2011, 17:37
I replaced the recoil spring with a gen 3. I replaced the MIM extractor and spring load bearing. The slide won't lock to the rear after the last shot and I'm still catching brass to the face. What do I have to replace next?

JR
07-24-2011, 14:18
You would have saved time by simply changing ammunition. (sorry)

red_eagle
07-25-2011, 12:40
Which ammo should I use? The only ammo it dosent do it with is +P, and I can't afford to train with that.

JR
07-26-2011, 11:55
I would try switching loads within a manufacture first. Try their standard 115, 124, 147 loads. If the performance is not what you expect, switch manufactures.
Believe it or not, each load will eject different than the other

red_eagle
07-26-2011, 12:11
I've tried 115gr target loads from S&B, PMC, Winchester-USA, and Remington UMC. I also tried 2 different 124gr hand loads.

JR
07-27-2011, 15:50
If you have tried different brands its time to start switching parts. I recommend you attend a factory sponsored GSSF shooting event and let the factory guys change out the parts until it stops hitting you in the head