Lee Hand Loader [Archive] - Glock Talk

PDA

View Full Version : Lee Hand Loader


Bill D
09-30-2011, 21:10
I have started shooting again after a long absence. Have a Ruger Mk 11 4" target(limited edition),Henry 22, Glock 19 and 26 for carry, Mossy 500 w/ Knoxx Special Ops stock, Ruger GP100 4" 357 (Lipsey Special Edition), and a Marlin 1894 357 lever(both unfired).
I have plenty of ammo for everything except 357. I am thinking about loading 38 and 357 in 357 brass for home, target, deer and hog hunting.
What will it cost to get back in the game, I have no equipment at all, and live in my 37' motor home(great life style)!
Will the hand loader suffice? Time doesn't really matter as retirement is near.
Thanks.

WiskyT
10-01-2011, 05:25
The handloader will suffice. If you have arthritis in your hands, it can be tiring to grip it, but it works great. With $100.00 and an empty shoe box to put everything in, you will have a reloading operation.

DoctaGlockta
10-01-2011, 06:43
I agree with Whisky. The thigh master is what I started with. Pick up a Lee hand primer and possibly a Lee powder measure as well.

http://www.midwayusa.com/viewProduct/?productNumber=540522

http://www.midwayusa.com/viewProduct/?productNumber=413473

I had a great starter set up that fit in a small tool box that I could carry with me anywhere.

Good luck.

Bill D
10-01-2011, 14:36
Thanks.

chris in va
10-02-2011, 22:42
I use the Lee Hand Press for everything...9mm, 45acp, 30-06, 223 and 7.62x39.

I don't buy the fancy crap, just whatever gets the job done. Get a decent used beam scale and make your own dippers out of wire, duct tape and cut down fired cases. $12 caliper works fine. Get some decent sized Glad bowls, probably 6 will do. Dig around in the range trash bins and find those plastic trays people throw away when they blow through a box of ammo.

The hand primer is junk. Use the Ram Prime that comes with the Hand Press kit, works much better.

freakshow10mm
10-02-2011, 23:25
I started loading 10mm on the Lee Hand Press. Still have it. It works. If that's all you can have, I wouldn't be ashamed of it. It loads accurate ammunition as long as you've got the time.

WiskyT
10-03-2011, 16:30
I use the Lee Hand Press for everything...9mm, 45acp, 30-06, 223 and 7.62x39.

I don't buy the fancy crap, just whatever gets the job done. Get a decent used beam scale and make your own dippers out of wire, duct tape and cut down fired cases. $12 caliper works fine. Get some decent sized Glad bowls, probably 6 will do. Dig around in the range trash bins and find those plastic trays people throw away when they blow through a box of ammo.

The hand primer is junk. Use the Ram Prime that comes with the Hand Press kit, works much better.

Lee redesigned the hand primer recently and it's supposed to be better. I don't know if it is. I have an RCBS and it's great. The ram prime looks like a good idea.

dwhite53
10-03-2011, 16:32
Ive been using a hand press for going on 4 years. Works well for what I load, .38 special, .357 mag, .40 S&W, .30-06.

Not the fastest thing in the world but it fulfills my needs. The Ram-Prime unit is a little awkward but it works.

A good scale, some home-made dippers, and some calipers should complete your set-up. Using Super-Glue to affix short pieces of bamboo skewers to trimmed cases is what I'm doing for home-made dippers.

All the Best,
D. White

garyjandfamily
10-03-2011, 16:50
I use the Lee Hand Press for everything...9mm, 45acp, 30-06, 223 and 7.62x39.

I don't buy the fancy crap, just whatever gets the job done. Get a decent used beam scale and make your own dippers out of wire, duct tape and cut down fired cases. $12 caliper works fine. Get some decent sized Glad bowls, probably 6 will do. Dig around in the range trash bins and find those plastic trays people throw away when they blow through a box of ammo.

The hand primer is junk. Use the Ram Prime that comes with the Hand Press kit, works much better.

I'm way more upscale than this, I use epoxy instead of duct tape, and coat hanger wire. I use .22, .25, .32 cal, and 9mm cases.

WiskyT
10-03-2011, 16:52
Use the bamboo skewers and you can write the load data on the stick with a fine point marker and some reading glasses.

El_Ron1
10-06-2011, 00:55
Lee Hand LoaderThis kinda guy recommends it:



http://i41.tinypic.com/bi34sx.jpg

Damon555
10-06-2011, 19:42
I have a lee hand press and don't enjoy using it at all....it's very tedious and slow. Spend the extra $20 and get a regular single stage press.

There are many ways to cheap out on reloading equipment but I don't think the press is the best place to do that. If you can swing it buy a whole lee kit....plenty cheap and has everything you need without having to be MacGyver.

GlockAzona
10-10-2011, 22:39
Back when I was in High School, this was my first reloading press - bottle capper & Lee Loader:

otis_bartleh
10-12-2011, 15:50
Yeah it's slow, but I don't find it any slower than my friends Rock Chucker, and I can sit in front of my TV with my Lee hand press... That said, I still want an auto-indexing turret press, but I don't have the room anyway...