Glock 21 picture thread [Archive] - Glock Talk

PDA

View Full Version : Glock 21 picture thread


DJ Niner
11-09-2011, 01:00
A photo thread for this forum was mentioned in another thread.

Post your G21/G21SF pix here!


http://img818.imageshack.us/img818/1455/g21sfwtlr1.jpg

BuckyP
11-09-2011, 07:00
:supergrin:

http://www.pollardfamily.net/al/g21expert2.jpg

BOOSTED12A
11-09-2011, 09:39
COOL!

this is the only one of the 21 that i have

http://i699.photobucket.com/albums/vv360/pugs1377/guns/DSC01101.jpg

G36shooter
11-10-2011, 08:56
Gen4 21 test fire date 10/7/2011

G36shooter
11-10-2011, 09:18
Gen4 21 Test fire date 10/7/2011

DJ Niner
11-12-2011, 01:10
Sweet pix, folks!

DustyDawg48
11-15-2011, 11:29
4,000 plus rounds and still looks as good as the day I bought her

http://i686.photobucket.com/albums/vv222/DustyDawg48/MondayFeb15023.jpg?t=1305056826

SDGlock23
11-16-2011, 15:30
My 21sf is currently off to Arizona were Robar is gonna put some NP3 on it.

eclark53520
11-16-2011, 15:41
http://i526.photobucket.com/albums/cc347/eclark53520/IMG_0726.jpg

SDGlock23
12-08-2011, 09:26
Got the 21 slide back in from Robar. Sorry for the poor pic quality, my phone camera must've been dirty. Will post better pics later.

http://img13.imageshack.us/img13/1812/20111201170559.jpg

First 15yd target using my handloads
http://img812.imageshack.us/img812/517/20111201165342.jpg

Vanilla-gorilla
12-08-2011, 09:30
(sigh) now I have to get one. THANKS ALOT!

RVFR
01-03-2012, 17:48
:) Just another plain and simple OD21

http://i33.photobucket.com/albums/d84/RVFR/More%20of%20the%20same/DSCF8875.jpg

triggerjerk
01-06-2012, 18:34
http://img718.imageshack.us/img718/65/g21sftarget.jpg

http://img341.imageshack.us/img341/9880/g21sfcounter.jpg

genecole
01-30-2012, 08:55
This is my 21sf and a doe I got with it just before Christmas ladder year.

Outdoor Hub mobile, the outdoor information engine

vaquero aleman
02-24-2012, 22:07
something else to spend money on...



http://i1163.photobucket.com/albums/q547/vaqueroaleman/Guns%20and%20Ammo/G4.jpg
http://i1163.photobucket.com/albums/q547/vaqueroaleman/Guns%20and%20Ammo/G6.jpg
http://i1163.photobucket.com/albums/q547/vaqueroaleman/Guns%20and%20Ammo/G1.jpg

twogunjay
02-24-2012, 22:50
http://i269.photobucket.com/albums/jj69/twogunjay/IMG_5878.jpg

http://i269.photobucket.com/albums/jj69/twogunjay/IMG_5876.jpg

http://i269.photobucket.com/albums/jj69/twogunjay/IMG_5881.jpg

vaquero aleman
02-25-2012, 06:15
Thank God for Walmart and Winchester.

high ground
02-25-2012, 10:38
@twogunjay- where did you have the slide work done? Looks nice!

twogunjay
02-25-2012, 11:27
@twogunjay- where did you have the slide work done? Looks nice!

Thanks! We do that in house. It actually serves some practical purposes as well.

SDGlock23
02-26-2012, 13:34
http://img689.imageshack.us/img689/9350/g21sfrobar22612.jpg

repo4sale
02-27-2012, 08:42
G21C aka Compensated with 2 extra barrels:
1=G21 stock barrel non-compensated
2=Stainless 45acp barrel

thedave8
02-27-2012, 08:49
http://i271.photobucket.com/albums/jj134/thedave8/g21053.jpg
http://i271.photobucket.com/albums/jj134/thedave8/g21044.jpg
love the big bore pic!

Patriot III
02-27-2012, 11:25
I like lighter the better. Warren Sights, 3.5# connector with polished interior, and 19# recoil spring. It's down to near 24 ounces empty.

http://i70.photobucket.com/albums/i90/TedG954/2012-02-271.jpg

http://i70.photobucket.com/albums/i90/TedG954/LWTG21SFA.jpg

BOOSTED12A
02-27-2012, 20:34
that is neat lookin. did you do that your self?

Patriot III
02-27-2012, 21:38
that is neat lookin. did you do that your self?


I have a friend that is a skilled machinist. He did my G17 too.

http://i70.photobucket.com/albums/i90/TedG954/WarrenSights.jpg

BOOSTED12A
02-27-2012, 21:51
i see. serations all the way down the slide would look cool and drop an oz or too

vaquero aleman
02-28-2012, 17:11
I have performed a slight modification to my 21:

http://i1163.photobucket.com/albums/q547/vaqueroaleman/Guns%20and%20Ammo/39.jpg
http://i1163.photobucket.com/albums/q547/vaqueroaleman/Guns%20and%20Ammo/45.jpg
http://i1163.photobucket.com/albums/q547/vaqueroaleman/Guns%20and%20Ammo/40.jpg

Just a little change in color.

BOOSTED12A
02-28-2012, 17:15
did u polish the slide? or just sand it some?

vaquero aleman
02-29-2012, 07:00
I stripped it down to bare, soaked it, the extractor, and the barrel in vinegar for two to three hours, rinsed and dried it, sprayed WD40 in the openings, cleaned the orange residue from the holes and cracks with a Q-tip, rubbed it, and the barrel, really good with a sanding sponge and then blasted it with WD40. After the soaking it had a flat black coating/residue which came off very easily with the medium grit.

Crook214
02-29-2012, 07:24
My gen4....http://img.tapatalk.com/aefce042-2721-979b.jpg


Sent from my iPhone 4.....

reflex264
03-03-2012, 10:28
My 21SF with 6" Storm Lake barrel, lone wolfe trigger housing with stop adjustment, wolfe rod and 24# spring, ghost rocket connector.
http://i42.photobucket.com/albums/e328/reflex264/guns/glock.jpg

With the above and siderlock trigger for hunting:
http://i42.photobucket.com/albums/e328/reflex264/guns/superglock.jpg

One of the 185 noslers next to a 210gr .41 mag bullet

http://i42.photobucket.com/albums/e328/reflex264/guns/185nosler.jpg

T-Rod45
03-03-2012, 10:40
The Glock that started it all for me...

http://i25.photobucket.com/albums/c83/turb0_t0m/51a27062-2.jpg

http://i25.photobucket.com/albums/c83/turb0_t0m/0a046101-1.jpg

pcc
03-05-2012, 05:50
my G21

https://lh4.googleusercontent.com/-0Yr9Gt2AsLY/TITUiJGznuI/AAAAAAAADBE/4SvgYkgFV20/s720/DSC03416.JPG

repo4sale
03-05-2012, 07:19
Sorry, My G21C photo is not ready.

thedave8
03-05-2012, 08:17
my G21

https://lh4.googleusercontent.com/-0Yr9Gt2AsLY/TITUiJGznuI/AAAAAAAADBE/4SvgYkgFV20/s720/DSC03416.JPG
love the wrap......you do it or have it done? might want to do 1 like that....

harleytech
03-05-2012, 08:26
Here's my 21 SF...
http://img560.imageshack.us/img560/6234/myglock21nib002.jpg

gdawg09
03-05-2012, 10:59
Excellent work. I sent you a PM for some more info. How many rounds have you run through the guns since this work was done, and what effect, if any, did it have on recoil? thanks

Archer-one
03-05-2012, 12:48
Here's a couple of bad to the bone hunting setups. The "brown" one is a G21 with a 40SUPER conversion barrel and the "green" one is a G20 10mm...
http://i833.photobucket.com/albums/zz252/JeremiahJohnson78/FilmdipG20andg21.jpg

thedave8
03-05-2012, 13:27
Here's a couple of bad to the bone hunting setups. The "brown" one is a G21 with a 40SUPER conversion barrel and the "green" one is a G20 10mm...
http://i833.photobucket.com/albums/zz252/JeremiahJohnson78/FilmdipG20andg21.jpg
very nice!!! I need more info on these camo jobs!!!

Archer-one
03-05-2012, 14:28
very nice!!! I need more info on these camo jobs!!!

It's a film dip process that we do. The price isn't too bad and they seem pretty durable. The "green" one is my personal "woods" gun; it gets the crap beat out of it on a regular basis. I had it dipped early last year and it is now showing some signs of wear. I am told that there is a different clear coat being used now; that is more durable than the one used on my gun. Let me know if you need any specific info; glad to help.

pantro6903
03-05-2012, 14:46
What is the name of that slide?
I like lighter the better. Warren Sights, 3.5# connector with polished interior, and 19# recoil spring. It's down to near 24 ounces empty.

http://i70.photobucket.com/albums/i90/TedG954/2012-02-271.jpg

http://i70.photobucket.com/albums/i90/TedG954/LWTG21SFA.jpg

larson1122
03-05-2012, 19:03
http://sphotos.xx.fbcdn.net/hphotos-ash4/s720x720/423716_10150654607362612_509347611_9331775_1538856011_n.jpghttp://sphotos.xx.fbcdn.net/hphotos-snc7/s720x720/417189_10150654607692612_509347611_9331779_579421810_n.jpg

thedave8
03-05-2012, 19:05
It's a film dip process that we do. The price isn't too bad and they seem pretty durable. The "green" one is my personal "woods" gun; it gets the crap beat out of it on a regular basis. I had it dipped early last year and it is now showing some signs of wear. I am told that there is a different clear coat being used now; that is more durable than the one used on my gun. Let me know if you need any specific info; glad to help.
thanks...whats typical cost? sorry to stray....:whistling:

Butch
03-05-2012, 20:13
http://img.photobucket.com/albums/0603/ButchG17/Glock%20pics/DSC01190-1.jpg

pcc
03-06-2012, 05:53
love the wrap......you do it or have it done? might want to do 1 like that....

IIRC this is one of the special runs done either by Glock for a distributor or by a Glock distributor with Glocks approval. They only did 45's and 40's in this desert camo.

One of the things that in my opinion makes this glock more unusual than the camo pattern is the frame color. It's a tan color similar to the OD green that everyone is paying a premium for right now.

There are a few places in GA that do the hydro graphics. Slides run around 150, full pistols run anywhere from 200 to 300.

thedave8
03-06-2012, 07:50
IIRC this is one of the special runs done either by Glock for a distributor or by a Glock distributor with Glocks approval. They only did 45's and 40's in this desert camo.

One of the things that in my opinion makes this glock more unusual than the camo pattern is the frame color. It's a tan color similar to the OD green that everyone is paying a premium for right now.

There are a few places in GA that do the hydro graphics. Slides run around 150, full pistols run anywhere from 200 to 300.
thanks for info....you have a rare bird in that case....

TTO DRIVER
03-07-2012, 14:00
My " Big Daddy ":cool:

http://i37.photobucket.com/albums/e72/smilee10/photo-4.jpghttp://i37.photobucket.com/albums/e72/smilee10/photo-3.jpg

Patriot III
03-13-2012, 08:53
http://i269.photobucket.com/albums/jj69/twogunjay/IMG_5878.jpg

http://i269.photobucket.com/albums/jj69/twogunjay/IMG_5876.jpg

http://i269.photobucket.com/albums/jj69/twogunjay/IMG_5881.jpg

Nice slide work. Did you get it locally? I've got a guy in Brecksville that does mine.

Patriot III
03-13-2012, 08:55
What is the name of that slide?

It's an OEM Glock slide that's 15% lighter than stock.

http://i70.photobucket.com/albums/i90/TedG954/IMG_0078-2copy.jpg

http://i70.photobucket.com/albums/i90/TedG954/2012-02-271.jpg

medaces
03-18-2012, 15:09
This is my Glock 21L sf threaded barrel with carbon fiber frame, 2 lb trigger, 17 round clip etc...

Patriot III
03-22-2012, 08:56
What is the name of that slide?

No name. Just done in a machine shop. My G21 slide weighs 15% less than OEM.

http://i70.photobucket.com/albums/i90/TedG954/CustomSlidePPS.jpg

BOOSTED12A
03-22-2012, 22:40
is ther more fealt recoil with the lighter slide?

Patriot III
03-23-2012, 06:42
is ther more fealt recoil with the lighter slide?

I haven't noticed any difference in recoil. I have increased the recoil springs to 19# and everything runs smooth and functions 100%.

vaquero aleman
04-04-2012, 06:07
This is my G21 in 45 Super.

http://i1163.photobucket.com/albums/q547/vaqueroaleman/Guns%20n%20Ammo%202/DSCN0352.jpg

LWD 45LTH trimmed to 5.25"

And (eventually) .460 Rowland

http://i1163.photobucket.com/albums/q547/vaqueroaleman/Guns%20n%20Ammo%202/DSCN0367-1.jpg

chemboy
04-25-2012, 15:46
http://img.photobucket.com/albums/0603/ButchG17/Glock%20pics/DSC01190-1.jpg


I'd say someone likes G21s!
:cool:

I have a Gen4 G21 on layaway, so these pics are great to see.

thedave8
04-25-2012, 16:48
This is my G21 in 45 Super.

http://i1163.photobucket.com/albums/q547/vaqueroaleman/Guns%20n%20Ammo%202/DSCN0352.jpg

LWD 45LTH trimmed to 5.25"

And (eventually) .460 Rowland

http://i1163.photobucket.com/albums/q547/vaqueroaleman/Guns%20n%20Ammo%202/DSCN0367-1.jpg
what does a .45 super look like next to a .45acp?

vaquero aleman
04-28-2012, 19:57
deleted

vaquero aleman
04-28-2012, 20:29
From left to right, WWB 45acp 230gr round nose, TulAmmo 45acp 230gr round nose, Buffalo Bore 45 Super 185gr JHP, Georgia Arms .460 Rowland 230gr GDHP.


Maximum Average Pressure is: 45 ACP (21,000 PSI), .45 ACP +P (23,000 PSI), 45 Super (28,000 PSI), .460 Rowland (40,000 PSI). The 45 ACP and the 45 Super rounds are externally identical and the difference is in the manufacturing of the case. The 45 Super case was strengthened to handle the higher pressures without failure in a standard 45 ACP pistol. Although most of the development was done with barrels that have "fully supported" chambers.
http://i1163.photobucket.com/albums/q547/vaqueroaleman/Guns%20n%20Ammo%202/DSCN0438.jpg

vaquero aleman
05-01-2012, 10:27
Woops... tripped over the Dremel and look what happened to my barrel! It also got a good reaming and it is now chambered for .460 Rowland! God help me! Yeh, I sanded the Wolf right off a that sucka!

http://i1163.photobucket.com/albums/q547/vaqueroaleman/460%20ROWLAND/DSCN0474-1.jpg

http://i1163.photobucket.com/albums/q547/vaqueroaleman/460%20ROWLAND/DSCN0475-1.jpg

And I finally got this LWD 45TH reamed out for .460 Rowland:
http://i1163.photobucket.com/albums/q547/vaqueroaleman/460%20ROWLAND/DSCN0468-1.jpg

http://i1163.photobucket.com/albums/q547/vaqueroaleman/460%20ROWLAND/DSCN0442-1.jpg

http://i1163.photobucket.com/albums/q547/vaqueroaleman/460%20ROWLAND/DSCN0454-1.jpg

This is one, mean, nasty barrel chamber reamer, I gare-own-tee! I believe I coulda went clean to China if I kept at it!
http://i1163.photobucket.com/albums/q547/vaqueroaleman/460%20ROWLAND/DSCN0448-1.jpg

vaquero aleman
05-01-2012, 17:29
deleted.

thedave8
05-01-2012, 20:50
From left to right, WWB 45acp 230gr round nose, TulAmmo 45acp 230gr round nose, Buffalo Bore 45 Super 185gr JHP, Georgia Arms .460 Rowland 230gr GDHP.


Maximum Average Pressure is: 45 ACP (21,000 PSI), .45 ACP +P (23,000 PSI), 45 Super (28,000 PSI), .460 Rowland (40,000 PSI). The 45 ACP and the 45 Super rounds are externally identical and the difference is in the manufacturing of the case. The 45 Super case was strengthened to handle the higher pressures without failure in a standard 45 ACP pistol. Although most of the development was done with barrels that have "fully supported" chambers.
http://i1163.photobucket.com/albums/q547/vaqueroaleman/Guns%20n%20Ammo%202/DSCN0438.jpg
thanks for the info ...thats really interesting!

BOOSTED12A
05-02-2012, 09:20
so, the 460 fits in the 45 mag?

vaquero aleman
05-02-2012, 09:41
so, the 460 fits in the 45 mag?

Yes sir!
http://i1163.photobucket.com/albums/q547/vaqueroaleman/460%20ROWLAND/DSCN0479.jpg



http://i1163.photobucket.com/albums/q547/vaqueroaleman/460%20ROWLAND/DSCN0397.jpg


http://i1163.photobucket.com/albums/q547/vaqueroaleman/460%20ROWLAND/DSCN0484.jpg

21GlockStreet
05-16-2012, 19:26
something else to spend money on...



http://i1163.photobucket.com/albums/q547/vaqueroaleman/Guns%20and%20Ammo/G4.jpg
http://i1163.photobucket.com/albums/q547/vaqueroaleman/Guns%20and%20Ammo/G6.jpg
http://i1163.photobucket.com/albums/q547/vaqueroaleman/Guns%20and%20Ammo/G1.jpg

Looks like an M198 155mm Howitzer!

GLOCK17DB9
05-16-2012, 20:22
here is my G21:supergrin:

vaquero aleman
05-23-2012, 13:10
http://i1163.photobucket.com/albums/q547/vaqueroaleman/45%20Super/DSCN0532-1.jpg

rider
05-29-2012, 04:37
Very nice, PCC! Who did it?

https://lh4.googleusercontent.com/-0Yr9Gt2AsLY/TITUiJGznuI/AAAAAAAADBE/4SvgYkgFV20/s720/DSC03416.JPG[/QUOTE]

Rancho_Nirvana
06-27-2012, 02:34
Sending mine into Cold Bore;

http://i238.photobucket.com/albums/ff295/Texaspoff/DSC_0009-3.jpg

ZQQM
06-27-2012, 17:41
What color is that? Looks sweet!

MikeB2
09-01-2012, 09:39
My first and only Glock so far, kind of thinking a G36 will be next.

http://i129.photobucket.com/albums/p210/msb80sc/Stuff/45a.jpg

SDGlock23
09-23-2012, 09:07
Another one of the G21sf NP3. 45 ACP and .45 Super? Can't beat it!!

http://imageshack.us/a/img849/8500/g21sfnp392212.jpg

BOOSTED12A
09-26-2012, 13:35
My first and only Glock so far, kind of thinking a G36 will be next.

http://i129.photobucket.com/albums/p210/msb80sc/Stuff/45a.jpg
congrats! my 21 is the only glock i own too. youll love it. what part of va are you in?

DFin
09-29-2012, 07:33
Vaquero,
What tool do you attach that reamer to when you ream out the chamber?

DFin
09-29-2012, 07:34
Looks like an M198 155mm Howitzer!

Or a 175mm Long Tom!!! It would be neat to have a whole battery of those!

vaquero aleman
09-29-2012, 08:41
Vaquero,
What tool do you attach that reamer to when you ream out the chamber?

The next time I use it I will use a tap and die handle and a vise. But the first time I used a standard adjustable wrench. The reamer is very sharp and it did not take much effort to ream the barrels that I bought from LWD.

vaquero aleman
09-29-2012, 08:51
Looks like an M198 155mm Howitzer!

I worked on the M109 for 8 years in the Army. I know what you mean about that look.

http://i1163.photobucket.com/albums/q547/vaqueroaleman/Guns%20and%20Ammo/G9-1.jpg

http://i1163.photobucket.com/albums/q547/vaqueroaleman/M109_155-mm_SP_Gun_Edmonton_Garrison.jpg

SDGlock23
10-16-2012, 08:42
I picked this up yesterday, I really have grown fond the the Gen4s, mainly the grip. I wasted no time installing the extended slide release and green/green Ameriglo I-Dot night sights.

The icing on the cake is that the same day my 2 KKM barrels arrived, a G24 bbl for my Gen4 G35 and the barrel I'm going to use for my .45 Super loads, a KKM G21 4-Port. I had a stock 4.6" KKM for use with the .45 Super, but this will help out, it's longer (about 5") and ported.

http://imageshack.us/a/img255/6454/g21gen4101512.jpg

With the 4 port KKM barrel:

http://imageshack.us/a/img706/2176/g21gen4kkm101512.jpg

ChrisYZFR1
10-16-2012, 22:27
I picked this up yesterday, I really have grown fond the the Gen4s, mainly the grip. I wasted no time installing the extended slide release and green/green Ameriglo I-Dot night sights.

The icing on the cake is that the same day my 2 KKM barrels arrived, a G24 bbl for my Gen4 G35 and the barrel I'm going to use for my .45 Super loads, a KKM G21 4-Port. I had a stock 4.6" KKM for use with the .45 Super, but this will help out, it's longer (about 5") and ported.

http://imageshack.us/a/img255/6454/g21gen4101512.jpg

With the 4 port KKM barrel:

http://imageshack.us/a/img706/2176/g21gen4kkm101512.jpg


Very nice

ESAFO
02-27-2013, 15:50
just brought her home.... :supergrin:
http://i955.photobucket.com/albums/ae35/ESAFO/IMG_1470_zps5fa5df32.jpg

thedave8
02-27-2013, 22:20
I forget if i ever uploaded a pic of my Gen 2 21....this thing shoots incredible!!!!
I will get some better pics soon......

nolt
03-16-2013, 23:16
https://lh4.googleusercontent.com/-1KP-8sWa8rc/UONVFbGbkBI/AAAAAAAAOZ0/4-OJVZMIEM4/s1152/G21_Gen4_FDE.jpg

bassgunner
04-04-2013, 05:52
my contribution

https://dl.dropbox.com/u/21083250/glock21pic.JPG

Jack23
04-04-2013, 21:33
Here's my Gen 3 with the barrel bead blasted and polished. :cool: :wavey:

AIRsTINK
04-06-2013, 22:04
G21 Gen 3, wishing for 13 round magazine...maybe in another life or another state :crying:

SGT45
04-18-2013, 20:55
I love my new G21GEN4!!!

http://i.imgur.com/nZj5tsy.jpg

21GlockStreet
04-28-2013, 20:33
233020233021
Gen 3 Glock 21SF. Glock night sights, stainless steel guide rod, extended magazine release, Hogue palm swell grips.

Posted using Outdoor Hub Campfire (http://www.outdoorhub.com/mobile/)

SGT67
06-09-2013, 19:45
Heres mine

Colorado Sunshine
07-20-2013, 00:55
234621234622 234623


Love it.


Posted using Outdoor Hub Campfire (http://www.outdoorhub.com/mobile/)

Hackett
08-13-2013, 07:28
I do minor smith and customization work, and did a light hand polish to the barrel and pins, as well as an internal detail cleaning and contact polishing for a nice crisp trigger and break.

http://i50.photobucket.com/albums/f330/jcapicy/20130812_1200591_zpsf92fb625.jpg (http://s50.photobucket.com/user/jcapicy/media/20130812_1200591_zpsf92fb625.jpg.html)

Glock30Eric
08-13-2013, 08:39
something else to spend money on...



http://i1163.photobucket.com/albums/q547/vaqueroaleman/Guns%20and%20Ammo/G4.jpg
http://i1163.photobucket.com/albums/q547/vaqueroaleman/Guns%20and%20Ammo/G6.jpg
http://i1163.photobucket.com/albums/q547/vaqueroaleman/Guns%20and%20Ammo/G1.jpg

Where did you buy that barrel? I would like to have that to increase FPS for the deer hunting with G21 in .460 Rowland!

vaquero aleman
08-13-2013, 11:58
Where did you buy that barrel? I would like to have that to increase FPS for the deer hunting with G21 in .460 Rowland!

That is an LWD 21LTH, 6.61" that my LGS ruined when I was working in Mississippi. I took the barrel to him and he tried to use a 45/70 reamer to lengthen the chamber for .460 Rowland but he gouged the chamber and made the barrel useless for anything other than 45acp. I've come a long way since then and I have re-chambered three barrels, my self, for .460 Rowland, all very successfully. The most recent being a KKM 4 3/8" 578X28 and I am just waiting for an upgraded recoil assy. to try it out.

LWD hasn't been able to get any of those 6.61" barrels back in stock since I bought that one about a year ago so you may have to do some searching for it. Good luck!

Glock30Eric
08-13-2013, 12:08
That is an LWD 21LTH, 6.61" that my LGS ruined when I was working in Mississippi. I took the barrel to him and he tried to use a 45/70 reamer to lengthen the chamber for .460 Rowland but he gouged the chamber and made the barrel useless for anything other than 45acp. I've come a long way since then and I have re-chambered three barrels, my self, for .460 Rowland, all very successfully. The most recent being a KKM 4 3/8" 578X28 and I am just waiting for an upgraded recoil assy. to try it out.

LWD hasn't been able to get any of those 6.61" barrels back in stock since I bought that one about a year ago so you may have to do some searching for it. Good luck!

If I found one, could I send the barrel to you to lengthen the chamber for .460 Rowland?

vaquero aleman
08-13-2013, 12:23
If I found one, could I send the barrel to you to lengthen the chamber for .460 Rowland?

PM Sent.

TangoFoxtrot
08-17-2013, 19:14
I do minor smith and customization work, and did a light hand polish to the barrel and pins, as well as an internal detail cleaning and contact polishing for a nice crisp trigger and break.

http://i50.photobucket.com/albums/f330/jcapicy/20130812_1200591_zpsf92fb625.jpg (http://s50.photobucket.com/user/jcapicy/media/20130812_1200591_zpsf92fb625.jpg.html)
Nice 21

JBelew
08-25-2013, 19:06
I miss my 21sf. Still got the 30sf.

ESAFO
10-05-2013, 17:26
newest addition to my FDE collection. :supergrin:
http://i955.photobucket.com/albums/ae35/ESAFO/IMG_1749_zpsadea1abf.jpg (http://s955.photobucket.com/user/ESAFO/media/IMG_1749_zpsadea1abf.jpg.html)

SDGlock23
10-07-2013, 08:40
Nice looking FDE G21 ESAFO! I wish I had picked one up when I had the chance, in never hurts to have two Gen4 21's!

ESAFO
10-07-2013, 09:30
Nice looking FDE G21 ESAFO! I wish I had picked one up when I had the chance, in never hurts to have two Gen4 21's!

Thanks-yep 1 for show & 1 for go. :rofl:

nickster1
10-27-2013, 08:34
Picked up this gen 4 g21 fde a couple months ago. Tlr-1s, vickers base plates. Will be getting sights and ext slide lock next. Love the way this gun shoots.
http://i130.photobucket.com/albums/p266/silvernickster/20131026_092814_zpsb05ebb2d.jpg

Sent from my SCH-I545 using Ohub Campfire mobile app

Dogman 10x
03-02-2014, 09:31
Any grip reduction G21's around??

Eric2340
03-02-2014, 14:55
http://i268.photobucket.com/albums/jj23/esg94045/guns/21-1.jpg (http://s268.photobucket.com/user/esg94045/media/guns/21-1.jpg.html)

J Lee
04-17-2014, 20:41
Strange that that most look the same and yet I still like looking at them. Guess I like 21s.

GWG19
04-18-2014, 07:52
Here is my G21
http://i94.photobucket.com/albums/l106/gofftkd/Snapbucket/B68BF86D_zpsd0d05349.jpg
http://i94.photobucket.com/albums/l106/gofftkd/Snapbucket/EE9EB675_zpsdf82e572.jpg

But what good is a suppressed pistol with out an SBR to go with it?

http://i94.photobucket.com/albums/l106/gofftkd/Snapbucket/3E96E9E3_zps015fc124.jpg

JMuni
10-09-2014, 14:56
Gen II G21; Aro-Tek Tactical package, Cold Bore Customs, Glock factory threaded barrel, AAC Ti-RANT 45s.