Need load data for a G30 [Archive] - Glock Talk

PDA

View Full Version : Need load data for a G30


Mr981
11-11-2011, 21:38
I'm about ready to load a batch of Berry's plated 230 gr RN for my G30, but having changed my PC. my load data got lost in the switch.

I'm using titegroup; IIRC, it was around 4.6 grn but not positive, with a OAL of about 1.20".

Would appreciate any load data for this round through a G30 using Titegroup; thanks in advance for any help.

F106 Fan
11-11-2011, 21:54
Why not go to the Hodgdon reloading site and get the data from them?

http://data.hodgdon.com/cartridge_load.asp

Richard

tjpet
11-11-2011, 22:19
Try 4.5grs. of WST.

DoctaGlockta
11-12-2011, 02:32
6.0 grains of Unique.

Mr981
11-12-2011, 07:02
Why not go to the Hodgdon reloading site and get the data from them?

http://data.hodgdon.com/cartridge_load.asp

Richard

I've been there and that's a good starting point but would guess that's using a full size 1911 for the specs; the G30 velocity would be lower.

Colorado4Wheel
11-12-2011, 08:33
Are you chasing some phantom velocity? Your just going to have to work it up again. 4.8 grs is only .2 grs below MAX as far as Hodgon is concerned.

F106 Fan
11-12-2011, 10:06
I've been there and that's a good starting point but would guess that's using a full size 1911 for the specs; the G30 velocity would be lower.

But you have already said what bullet you are going to use and you have already selected a specific powder. All the Hodgdon data will provide is a range of safe loads.

Richard