PIC request: 2nd generation G20 chamber [Archive] - Glock Talk

PDA

View Full Version : PIC request: 2nd generation G20 chamber


dwebb210
11-14-2011, 19:04
Can people who own early 2nd generation Glock 20s please post a photo of your chamber?

This will probably require knowing how to use a macro setting on your camera, and getting the lighting just right. But any help would be greatly appreciated.

My chamber has tool marks that people are pointing to and claiming I did myself.

I contend it came from the factory this way.

http://home.mchsi.com/the_reaper/chamber2.jpg

TreyG-20
11-14-2011, 21:20
My gen 2 chamber i appoligize for the quality of photos. Mine is dated 94 AZH*** US is this the same as yours?

TreyG-20
11-14-2011, 21:32
heres one more

PBRLite
11-14-2011, 22:33
Well....I took about 5 pics, but photobucket appears to be down. Will post pics as soon as possible. My Glock gen 2 G20 is a APY... serial number. And after looking at the stock barrel that came with it, and after looking at the KB'd glock....they look pretty similar.

TreyG-20
11-15-2011, 07:40
Well....I took about 5 pics, but photobucket appears to be down. Will post pics as soon as possible. My Glock gen 2 G20 is a APY... serial number. And after looking at the stock barrel that came with it, and after looking at the KB'd glock....they look pretty similar.

Mine looks similar as well

CanyonMan
11-15-2011, 07:56
Can people who own early 2nd generation Glock 20s please post a photo of your chamber?

This will probably require knowing how to use a macro setting on your camera, and getting the lighting just right. But any help would be greatly appreciated.

My chamber has tool marks that people are pointing to and claiming I did myself.

I contend it came from the factory this way.

http://home.mchsi.com/the_reaper/chamber2.jpg



Hey amigo. I am one of those guys that said "it sure has every sign of a dremel head bumping into the ramp and chamber", but never said YOU did it.

I'll be honest with ya, I have had Glocks with chatter /tool marks in the muzzle end of the slide, and had one with simular cuts, or chatter as yours, not on the ramp, but 'way up inside the chamber' on a G30. I called a guy I know at Glock and after a sit dow for a while, he sent me a new barrel in exchange. (once he saw it).

If yours is 'just on the ramp', you can smooth that up. If it is this way deep into the chamber, I would send it to Glock, and if they don't help ya, buy a new one, and or an after market one. Bout all ya can do pard ! :dunno:



Good luck, Hope ya get it worked out.







CM

_The_Shadow
11-15-2011, 14:55
Can people who own early 2nd generation Glock 20s please post a photo of your chamber?

This will probably require knowing how to use a macro setting on your camera, and getting the lighting just right. But any help would be greatly appreciated.

My chamber has tool marks that people are pointing to and claiming I did myself.

I contend it came from the factory this way.

http://home.mchsi.com/the_reaper/chamber2.jpg

It would be my opinion that that chamber was worked and worked allot, maybe not by you but by someone after it left the factory!

I would doubt that that left the factory like that! :shocked:

TreyG-20
11-15-2011, 16:53
I don't doubt that at all. Mine looks almost the same as his

PBRLite
11-15-2011, 17:42
http://i726.photobucket.com/albums/ww266/yeahitsthatbig/fcc6ce93.jpg
http://i726.photobucket.com/albums/ww266/yeahitsthatbig/5004024c.jpg
http://i726.photobucket.com/albums/ww266/yeahitsthatbig/c1ace3db.jpg
http://i726.photobucket.com/albums/ww266/yeahitsthatbig/f03dcb8e.jpg
Sorry for the crappy pics. All I have available right now is my camera phone.

Obviously stock G20 barrel on left. Lonewolf G20 on right. I will have to grab my G29 and see if it looks the same.

_The_Shadow
11-16-2011, 14:42
Here you can see and read a story!
http://www.thefirearmblog.com/blog/2011/11/16/glock-20-10mm-auto-kaboom/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+TheFirearmBlog+%28The+Firearm+Blog%29