Just ordered one of these for my 1911!! [Archive] - Glock Talk

PDA

View Full Version : Just ordered one of these for my 1911!!


Danimal3805
03-18-2012, 17:23
http://www.ebay.com/itm/1911-45-Muzzle-Brake-MADE-IN-USA?item=230564656025&cmd=ViewItem&_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D3%26po%3DLVI%26ps%3D63%26clkid%3D7098210968631945179#ht_500 wt_715
:supergrin:
Should be fun!! :supergrin:

TN.Frank
03-18-2012, 17:28
Won't do a thing for a 45acp, pressure is too low. That's why guys that want to run Comps in IPSC use 38 Super, pressure is high enough to make the Comp work. Either way it'll LOOK cool.:cool:

Danimal3805
03-18-2012, 17:59
Yeah I wasn't looking for recoil reduction, just fun factor. Hoping for some flames out of the top too!! :supergrin: I like fire.....:50cal:

hogship
03-18-2012, 18:07
My first thoughts are similar to TNF, but I must admit that whatever I say about compensators is strictly theoretical, since I've never used one.

Danimal.....Well, you've got it now, so you should give us an update about your conclusions, once you've got that compensator installed. If all you're looking for is the "cool" factor and some "fire", then I'd guess you're probably going to get that.

Is there agreement among the competitive shooters that compensators actually work to the level of expectations they are hoping to achieve? It seems to me like there is such a small window of opportunity for them to work at all. If the bullet is behind the compensator it won't work. when the bullet leaves the muzzle, the remaining gasses will follow the path of least resistance.......out the muzzle.

But, as I said......all of this is theory on my part, because I have absolutely no experience with compensators.

ooc

TN.Frank
03-18-2012, 18:30
Yeah I wasn't looking for recoil reduction, just fun factor. Hoping for some flames out of the top too!! :supergrin: I like fire.....:50cal:

What you can do is use it to cock the weapon with one hand. If for some reason you got one of your arms/hands disabled and couldn't rack the slide you can press the muzzle of the comp against something hard to push the slide back.
Of course I won't run a guide rod in my 1911a1's for that very reason, you can push a full size against something just under the barrel and rack the slide back with one hand. Can't quite do it with a Commander size gun, enough to cock the hammer but not enough to chamber a round. Guess that's where the full size gun is just a bit better.

Njanear
03-18-2012, 18:40
Years ago, I bought one of those to put on my Norinco and while it looked good, it was also the only time that the pistol ever jammed (4 times in 50 rds). Perhaps it was just a coincidence but that piece now sits in my extra parts bin.

PS: Thanks for the reminder; I'll pull it out for my next 'time-to-finance-a-new-gun' drive. :)

TN.Frank
03-18-2012, 18:49
Not to hi-jack the thread but Njanear, are you the same guy that did the Nagant pistol web site? I loved that site, back when I had my Nagant pistol I read up on it and learned a lot. Anyway, if you are Thanks for a great web site.:wavey:

bac1023
03-18-2012, 18:53
Congrats

seanmac45
03-18-2012, 19:12
Post pics when you are done installing it.

Ruggles
03-18-2012, 19:29
Yeah I wasn't looking for recoil reduction, just fun factor. Hoping for some flames out of the top too!! :supergrin: I like fire.....:50cal:

Cool, that is all the reason you need :)

SalfromCal
03-18-2012, 22:27
If it's just for fun, there is a "better looking" one that matches the shape of the 1911

http://www.ebay.com/itm/1911-45acp-muzzle-brake-compensator-STAINLESS-STEEL-/330703170365?_trksid=p4340.m185&_trkparms=algo%3DSIC.NPJS%26its%3DI%252BC%26itu%3DUA%26otn%3D5%26pmod%3D330670590761%26ps%3D63%26clk id%3D7103045869960228519

Danimal3805
03-19-2012, 05:17
If it's just for fun, there is a "better looking" one that matches the shape of the 1911

http://www.ebay.com/itm/1911-45acp-muzzle-brake-compensator-STAINLESS-STEEL-/330703170365?_trksid=p4340.m185&_trkparms=algo%3DSIC.NPJS%26its%3DI%252BC%26itu%3DUA%26otn%3D5%26pmod%3D330670590761%26ps%3D63%26clk id%3D7103045869960228519

Yes, but that one isn't $25 and I'd feel like (more of) an idiot if it's dumb. :whistling: :tongueout: Damn right pics will be uploaded as soon as I stick it on!! Wasn't that a movie gun? 1911 with that comp?

TN.Frank
03-19-2012, 06:50
Years ago, I bought one of those to put on my Norinco and while it looked good, it was also the only time that the pistol ever jammed (4 times in 50 rds). Perhaps it was just a coincidence but that piece now sits in my extra parts bin.


Adding a part like this increases the weight of the slide assembly which lowers slide velociety. If you drop down on recoil spring weight by a couple pounds you can bring things back into balance. Some of the guys shooting IPSC with the 38 Super loaded up to make Major that are running Comps go as low as 8# on their recoil springs because the Comps are so effective that they cut the recoil down to where they barely have enough to work the slide.
I'd say if you have feeding/function problems drop down from the stock 18# recoil spring to a 16# and that'll fix things.

SalfromCal
03-19-2012, 11:37
Found a picture in the 1911 forum:
http://img835.imageshack.us/img835/5459/1911compensator.jpg

Nakanokalronin
03-19-2012, 16:21
Yes, but that one isn't $25 and I'd feel like (more of) an idiot if it's dumb. :whistling: :tongueout: Damn right pics will be uploaded as soon as I stick it on!! Wasn't that a movie gun? 1911 with that comp?

The gun your thinking of was from The Punisher with Thomas Jane. His was a complete King's compensator kit with threaded barrels, unlike the type on eBay that replace the bushing.

http://www.punisher-movie.com/images/pictures/movie/large/35.jpg

I got one of those eBay copies awhile ago for $30 when I bought my first 1911, but never installed it due to being kinda pointless. They charge $75 for them now which I find rather ludicrous and a waste of money, even if it's just for the look.

Danimal3805
03-23-2012, 20:55
Woooooooooo!!! It finally came!! :50cal: Certainly LOOKS badass!! I wonder if it will do anything.....probably not lol:tongueout:

brisk21
03-24-2012, 10:40
Found a picture in the 1911 forum:
http://img835.imageshack.us/img835/5459/1911compensator.jpg


These do make a difference on a .45. I had one years ago on a mil-spec. I will say the only real difference is the added weight to the end of the gun helps keep the muzzle down during recoil.

WXYZ
03-24-2012, 11:22
In that picture it looks to me like the compensator doesn't seat flat or tight against the muzzle, I can see a small gap, not sure if that's normal:upeyes: