Gonna run the new GC NN CCO in the morning [Archive] - Glock Talk

PDA

View Full Version : Gonna run the new GC NN CCO in the morning


glock2740
05-11-2012, 21:14
Found a local range (working on the road), to give the new Guncrafter No Name CCO a workout. I'll be taking the Wilson ULCc along to do some comparison shooting. Since I'm the original owner of the ULCc, I know it's a shooting machine, so the main brunt of my shooting will be done with the GC CCO. Picked a few hundred rounds of Independance 230gr FMJ's to use for the maiden voyage. Not my first choice for range ammo, but I've used it before and it'll be just fine. Wally World was out of the 250 round boxes of UMC 230gr FMJ, so I went with the other. I'll post target pics and a range report tomorrow. :cool:

No Name CCO in hardchrome :)
http://i914.photobucket.com/albums/ac341/OU1911/IMG_4008.jpg
Wilson ULCc
http://i914.photobucket.com/albums/ac341/OU1911/ULCcleft.jpg

OrygunGen4
05-11-2012, 22:22
LOVE THAT NN, ABSOLUTELY BEAUTIFUL!! That is my next 1911, except I will include a bobtail. :supergrin:

okie
05-11-2012, 22:22
Have fun my friend:supergrin::wavey:

Folsom_Prison
05-11-2012, 23:46
Love that CCO!!

glock2740
05-12-2012, 11:06
I didn't get to run them very hard, but was able to get some lead downrange with both. Here's 50 rounds each at 7 yards offhand. Been awhile since I've been shooting, so I'm sure I could close those groups up with a little more time on the range. :cool:

http://i914.photobucket.com/albums/ac341/OU1911/6.jpg


http://i914.photobucket.com/albums/ac341/OU1911/3.jpg


http://i914.photobucket.com/albums/ac341/OU1911/4.jpg

okie
05-12-2012, 12:06
Very nice my friend:thumbsup:

deputy tom
05-12-2012, 12:19
Very nice! tom.:supergrin:

mleroux21
05-12-2012, 15:24
Very nice! tom.:supergrin:

Tom?

Thought it was Joe.

glock2740
05-12-2012, 15:28
Tom was shooting the Wilson. I was shooting the No Name. He thought he did a pretty good job. He talks about himself in 3rd person. That's just how Tom is. You'd just have to know him I guess. :rofl:

EricandSuebee
05-12-2012, 15:43
I don't know maybe I should give it a try, should send it to me to test it out haha :) nice shooting my friend.

OrygunGen4
05-12-2012, 21:44
How would you compare the two?

adam

glock2740
05-12-2012, 22:16
How would you compare the two? adam
The Wilson weighs less. They are both as good a CC 1911 as it gets. Other than the weight, they are the same. I prefer, for CC, the Wilson, due to it's weight and the smaller "carry" controls. You can't go wrong with either one. :cool:

deputy tom
05-13-2012, 06:09
Tom?

Thought it was Joe.

Joe? tom.:dunno:

glock2740
05-13-2012, 08:01
I'm Joe. Tom.

fnfalman
05-13-2012, 18:30
Which one has better "feel"?

glock2740
05-13-2012, 18:38
Which one has better "feel"?
Very tough call. The CCO has thin grips, which I prefer. The ULCc has thin bushings, but I just haven't put thin grips on yet. The Wilson Carry controls definately have a completely different feel than regular sized controls. They feel really good IMO. The 15LPI checkering on the GC is done so well, that you really have to feel it for yourself before you can really make a good call on it. It feels GREAT. Alex makes it very grippy, while making it dull enough to not make it "sharp/pointy/sharp". They both have top notch triggers. The biggest difference, other than the Carry controls, is the weight. The aluminum frame on the Wilson makes it lighter for a better CC gun, IMO, but yet doesn't make it have any more felt recoil than the steel framed CCO. See, I told you it was a tough call. :supergrin:

bac1023
05-14-2012, 06:00
Very nice Joe :cool:

drc767
05-16-2012, 07:34
LOVE THAT NN, ABSOLUTELY BEAUTIFUL!! That is my next 1911, except I will include a bobtail. :supergrin:

No bobtail available on an Officer frame. Rounded butt, as shown, is as close as you can get. You want a Bobtail? You have to go with a full size frame.

OrygunGen4
07-08-2012, 23:33
No bobtail available on an Officer frame. Rounded butt, as shown, is as close as you can get. You want a Bobtail? You have to go with a full size frame.

Any word if Alex might be offering the bobtail (in an officer frame) in the near future??:dunno:

bac1023
07-09-2012, 01:13
Any word if Alex might be offering the bobtail (in an officer frame) in the near future??:dunno:

I'm not sure anyone offers a bobtail with a smaller frame.

faawrenchbndr
07-09-2012, 06:36
.......Here's 50 rounds each at 7 yards offhand. Been awhile since I've been shooting, so I'm sure I could close those groups up with a little more time on the range. :cool:


Looks like two dispatched paper bad guys!

Very nice Joe........:cool:

Hogpauls
07-09-2012, 09:23
Nice shootin', looks like you have a couple keepers.

ca survivor
07-10-2012, 07:05
LOVE THAT NN, ABSOLUTELY BEAUTIFUL!! That is my next 1911, except I will include a bobtail. :supergrin:
cco can't be bobtailed, only slight round but.

glock2740
07-10-2012, 10:45
This is the round butt Alex is putting on the No Name CCO. Round enough for me. :cool:

http://i914.photobucket.com/albums/ac341/OU1911/IMG_4015.jpg

http://i914.photobucket.com/albums/ac341/OU1911/IMG_4010.jpg

http://i914.photobucket.com/albums/ac341/OU1911/IMG_4008.jpg

OrygunGen4
07-10-2012, 11:56
[QUOTE=glock2740;19181280]This is the round butt Alex is putting on the No Name CCO. Round enough for me. :cool:

http://i914.photobucket.com/albums/ac341/OU1911/IMG_4015.jpg

Very nice! Guess I'm looking at my next No Name then.

Thought I had seen a bobtail on a NH commander model, I stand corrected :embarassed:

glock2740
07-10-2012, 15:35
[QUOTE=glock2740;19181280]This is the round butt Alex is putting on the No Name CCO. Round enough for me. :cool:

http://i914.photobucket.com/albums/ac341/OU1911/IMG_4015.jpg

Very nice! Guess I'm looking at my next No Name then.

Thought I had seen a bobtail on a NH commander model, I stand corrected :embarassed:
I think you are getting CCO and Commander mixed up. A Commander is a fullsize frame with a 4.25" slide (some 4" slides are called Commanders also). A CCO is a "Commander" sized slide on an Officer size frame. A fullsize frame can be bobtailed, but an Officer sized frame can't have a true bobtail. You can however round the butt, which can be done on any size 1911. Hope that helps. :)

Officer's Match
07-10-2012, 17:03
Nice pistola's JoeTom.

deguelo
07-10-2012, 20:29
Nice pistola's JoeTom.

umm.... it's tomjoe. :tongueout:

OrygunGen4
07-10-2012, 21:01
I think you are getting CCO and Commander mixed up. A Commander is a fullsize frame with a 4.25" slide (some 4" slides are called Commanders also). A CCO is a "Commander" sized slide on an Officer size frame. A fullsize frame can be bobtailed, but an Officer sized frame can't have a true bobtail. You can however round the butt, which can be done on any size 1911. Hope that helps. :)

Oops :faint:, thanks for clearing that up! For some reason I thought commanders had officer sized frames as well. Thanks.

adam

Wil Ufgood
07-10-2012, 21:16
JOE
http://image0-rubylane.s3.amazonaws.com/shops/galaxydollsandtoys/RL-1497.3L.jpg
TOM
http://www.idatasports.com/imgs/idbh/idbhd160a.jpg
??????????

glock2740
07-10-2012, 21:32
JOE
http://image0-rubylane.s3.amazonaws.com/shops/galaxydollsandtoys/RL-1497.3L.jpg
TOM
http://www.idatasports.com/imgs/idbh/idbhd160a.jpg
??????????
:rofl: