IWB holster for Glock 17L ? [Archive] - Glock Talk

PDA

View Full Version : IWB holster for Glock 17L ?


C0untZer0
06-23-2012, 15:04
I was considering either this or the Rohrbaugh R9 for CCW but it might come down to availabilty of holsters.


http://www.glocktalk.com/forums/attachment.php?attachmentid=226045&stc=1&d=1340485417

Rustin
06-23-2012, 15:11
Hrmmm, I can't think of any IWB holsters that will work with that setup. Perhaps a shotgun scabbard?

Bruce M
06-23-2012, 15:13
I was considering either this or the Rohrbaugh R9 for CCW but it might come down to availabilty of holsters.


http://www.glocktalk.com/forums/attachment.php?attachmentid=226045&stc=1&d=1340485417:rofl::rofl:


Technically, I think that is the 17 XL..

C0untZer0
06-23-2012, 15:25
I ordered 16" and 10" IBG barrels from MDW guns and they just arrived today so I couldn't resist.

I'm going to get som range time with them and see how they work. i'm hoping I don't have to either put in a lighter spring or shoot hotter ammo - but we'll see.

http://mdwguns.com/IGB_Price_12.html

Glockdude1
06-23-2012, 15:39
I really want to know what groups you can get at 100 yards!!

:supergrin:

Poohgyrr
06-23-2012, 15:58
I saw an ankle holster for that in the 511 catalog.








:wavey:

rilkil23
06-23-2012, 16:01
WOW! You Sir have a big one.

District18
06-23-2012, 20:30
Will it take down a bear?

























Just kidding.

C0untZer0
06-24-2012, 16:11
It's an 88 magnum

It shoots through schools...

DannyII
06-24-2012, 16:24
Pffftt! Was a threaded barrel and suppressor not available?
:rofl:

C0untZer0
06-24-2012, 18:44
^ Oh ya, they're available.

Look at their catalog they've even got special barrels for Roni and KPOS.

Folsom_Prison
06-24-2012, 18:47
Are you a mall ninja? :whistling:

C0untZer0
06-24-2012, 19:27
If I were I'd get the Glock that can summon & direct tornadoes.

C0untZer0
06-24-2012, 20:35
IGB is a barrel maker in Austria. IGB makes conversion barrels, ported, and threaded barrels and non-standard length barrels for most Glock models. The Glock typically has difficulty cycling with barrels past 7.5” The Impulse System was developed to enable standard semi-automatic pistols which feature a Browning-type tilt and lock-up to function properly with barrel’s longer than 7.5” (up to 16”)

http://www.glocktalk.com/forums/attachment.php?attachmentid=226082&stc=1&d=1340591512

The IGB barrels have two ports in them about ½ from the front end of the slide. The barrel is also threaded here, and a hood screws over the threads. IGB calls this the “Impulse Energy Collector” It’s just a chamber that collects gas. The chamber tightens in place with an allen screw, Also fitting over the barrel and into the chamber is a ring, which functions as a piston, IGB calls this the Impulse Energy Carrier. One end of the piston sits in the chamber, just rear of the gas ports, the other end of the piston sits against the front of the slide. The instructions say to leave a slight visible gap between the slide, the ring and the hood. I left enough room so I could stick a piece of paper through the gap.

When the cartridge fires, the chamber pressurizes with gas from the ports, the pressure sends the ring/piston back against the front of the slide, aiding in cycling.

BTW.. IGB stands for Impulse Gun Barrel,

I purchased the 10” and 16” barrels from MDW guns. I had to wait a little longer than expected. I think Marc at MDW was on a learning curve with importing these things from Austria, for instance, he didn’t know until after he’d followed up on a delay that Austria had changed how they process these exports. These sort of things happen whenever you’re going through a process for the first time. I think now that’s he’s gained experience doing these imports that anyone ordering these from Marc now would get accurate ETAs.

http://mdwguns.com/IGB_Price_1.html

I put 100 rounds through my Glock 17L with the 16” barrel and another 100 rounds through it with the 10” barrel. Both barrels worked fine. I didn’t have any problem cycling or ejection, no malfunctions of any kind.

The gun did spit out little hot bits of something onto my weak hand. I couldn’t figure out exactly what this was. They were tiny – about the size of a grain of sand. After about 25 rounds it stopped. I’m guessing it was metal shavings, because I found some metal shavings in the slide afterward.

The 16” barrel shot quite a bit low - ½” low at 25 feet compared to the stock barrel which is right on – elevation wise at that distance. This could obviously be compensated for by zeroing the sights, but then switching back and forth between barrels requires re-zeroing.

The 10” barrel didn’t shoot nearly as low – being about ¼” low at 50 feet. Despite shooting low – the 10” barrel was very accurate, or at least I shot it more accurately than I shoot the stock 6” barrel. Shooting offhand, my 5 shot group at 50” was one hole about ½” across – just below the bullseye.

I fired the 16” without the stock, and I think it’s just pretty difficult to fire offhand like that, I have no idea how accurate the barrel is, my shot groups were horrible, but I’ll put the stock on it and go back to the range sometime soon.

Both barrels made for a softer recoiling shot and less muzzle rise, but the 16” was unique, it was almost like a two-stage recoil, chunk-chunk type of feel to it

http://www.glocktalk.com/forums/attachment.php?attachmentid=226083&stc=1&d=1340591665

FFR Spyder GT
06-24-2012, 23:33
Are you a mall ninja? :whistling:

With that setup he's probably a Dollar Store Ninja.

C0untZer0
07-03-2012, 14:40
I'm going to take the 16" back to the range and fire it with the stock attached.

I have to say, I'm having a lot of fun with all of it.

Osborne
07-03-2012, 19:43
Is that a glock or are you just happy to see me?