Loaded into TRP? [Archive] - Glock Talk

PDA

View Full Version : Loaded into TRP?


nastytrigger
06-29-2012, 20:14
I can't find my original purchase price, but I have a 2005 Springfield Loaded Parkerized 5" I've toyed with getting rid of it a couple times. I believe I paid just under $800 for it. It's not a NM frame.

I've grown to love this pistol. I bought it wanting a Pro, or TRP, but that's over my budget. I don't like the Parkerized, but I've put up with it. Trigger could be better. Accuracy could be better (it does 2.5" at 10yds off-hand. My Glock's 19, 21, and Beretta 92FS can do under an inch at 10yds with WWB). It's combat accurate, but I want to reel in my groups more. Rattles a lot too. Very loose, lots of give in the bushing too. Very reliable though. I changed to the GI recoil plug vs 2-piece rod after I bought it. Free G10 grips too.

Main question... Would it be worth it to send my Loaded to Geneseo and make it a TRP for at least $895 (I think that's still the TRP-Package price). Not a true TRP, but TRP-Spec. I'd keep the GI plug system vs FLGR. Should of done this package when it was $100 cheaper a couple years ago...

Or, send it in, tighten frame/slide fit, better one-piece match barrel/bushing, trigger job, front strap check, deburr here/there, upgrade some parts (no MIM), and ArmoryKote or Black-T entire pistol. Haven't really priced this all out.

It's been a reliable 1911, that's fed nearly everything I've put through it (besides a couple Wolf's). I'd hate to part with it, we've been through a lot. I've got 2,500-3,000ish rounds through it. Basically, looking to make it more TRP-ish in performance and looks.

As far as overall cost, I can do $1,000, but I'd prefer under that.

Here's a pic:
http://img.tapatalk.com/18df8005-6625-1272.jpg

bac1023
06-29-2012, 20:20
I'd keep it and just buy a TRP when you have the extra funds.

nastytrigger
06-29-2012, 20:30
I'd keep it and just buy a TRP when you have the extra funds.

Thanks Bac.

What is the going price of TRP's now?

Wyoming
06-29-2012, 20:36
"I've grown to love this pistol"

Then keep it.

The TRP is a good handgun worth what ever time saving up to buy one. You can shop around in the mean time and you will have a very good idea what they sell for. You will know what to bid on one and when to stop and walk away.

Some day could have both.

knedrgr
06-29-2012, 21:04
A NIB TRP is around $1200ish

knedrgr
06-29-2012, 21:39
If you want to tighten up the group, there are two things you can do, inexpensively, that will help to tighten up the group.
1) call EGW and have them turn a new barrel bushing that matches the barrel's OD and the ID of the slide.

2) get a slide stop that has a true 0.200 pin diameter. (10-8 or Wilson) the barstock will also benefit the gun.

eric1
06-29-2012, 21:52
I paid $1,500 for a TRP today. Probably over paid, but I wanted it and it was in stock. Buds has one for $1358 http://www.budsgunshop.com/catalog/product_info.php/products_id/43772/Springfield+Armory+7+%2B+1+TRP+Standard+Armory+Kote+45+ACPTri

Rinspeed
06-29-2012, 22:18
A NIB TRP is around $1200ish




Maybe in 2009. :whistling:

glock2740
06-29-2012, 22:24
I'd keep it and just buy a TRP when you have the extra funds.
Ditto. :cool:

glock2740
06-29-2012, 22:26
If you want to tighten up the group, there are two things you can do, inexpensively, that will help to tighten up the group.
1) call EGW and have them turn a new barrel bushing that matches the barrel's OD and the ID of the slide.

2) get a slide stop that has a true 0.200 pin diameter. (10-8 or Wilson) the barstock will also benefit the gun.
I agree. Good advice. :thumbsup:

Ironbutt
06-30-2012, 10:01
I was thinking of having SACS turn my Range Officer into a TRP clone for a few months. After much deliberation, I ended up buying a TRP on GB for $1300 w/ free shipping.

If you only want one 1911, I'd go the SACS route. Your needs & budget may be different, but I figured, why pay $900 for an upgrade on the RO when for a few hundred more I can have my RO and a TRP.

glock2740
06-30-2012, 10:16
I was thinking of having SACS turn my Range Officer into a TRP clone for a few months. After much deliberation, I ended up buying a TRP on GB for $1300 w/ free shipping.

If you only want one 1911, I'd go the SACS route. Your needs & budget may be different, but I figured, why pay $900 for an upgrade on the RO when for a few hundred more I can have my RO and a TRP.
Good move. I never understood who in their right mind would get the TRP upgrade. I bought my TRP slightly used for $100 more than the upgrade costs. :dunno:

Amsdorf
06-30-2012, 12:26
Respectfully, if you are ready to step up to custom 1911, I'd highly recommend Ed Brown.

You are going to spend, what, nearly $1,700, considering your original purchase price?

FWIW, YMMV.

nastytrigger
06-30-2012, 19:56
I was thinking of having SACS turn my Range Officer into a TRP clone for a few months. After much deliberation, I ended up buying a TRP on GB for $1300 w/ free shipping.

If you only want one 1911, I'd go the SACS route. Your needs & budget may be different, but I figured, why pay $900 for an upgrade on the RO when for a few hundred more I can have my RO and a TRP.

I like your thinking. Same predicament.

Coming to realize, why pay for a TRP-Clone, when I could have a real one. I've got a grand. I've waited since 2005, I can wait longer.

I'll go the EGW bushing route for sure, can't leave my first 1911, wanting more. Slide stop too from 10-8 (been wanting their mag catch too).

agent clark
07-01-2012, 12:55
Or figure out what changes you would like and which ones you could live without and send it to the custom shop for some work. Then its your same gun, but personalized and will shoot as good or better than a TRP cause it will get some extra love. Nothing wrong with saving the pennies for a second pistol though, I shoot a stainless TRP.

nastytrigger
07-01-2012, 13:07
I've got an order made up:

-EGW Thick Flange Bushing in SS - OD: .575", ID: .699"
-10-8 Gen2 Slide Stop, Carbon Steel
-10-8 Flat Head Grip Screws (tired of hex)

I'll wait on the 10-8 mag catch. I'll ask for it for Christmas :)

faawrenchbndr
07-01-2012, 13:41
I recently installed a EGW bushing,.......a slight amount of fitting
was required. Darn good upgrade!

http://i30.photobucket.com/albums/c341/faawrenchbndr/8b3fc9d1.jpg

prez1967
07-01-2012, 14:13
I never wanted to upgrade my TRP as the money i would have used could go towards buying other guns.... Now that i have the "others"... Im upgrading the TRP