Everyone should have one of these...... [Archive] - Glock Talk

PDA

View Full Version : Everyone should have one of these......


blackbmw
07-14-2012, 21:40
http://i248.photobucket.com/albums/gg180/whitneyblocker/smith586.jpg

The Smith 586-3:supergrin:

Mint, no turn marks and all original box, papers, everything....thank you old guy who didnt shoot it and shoved it in the safe for 25 years:shocked:

bigchuck83
07-14-2012, 21:48
i could never buy a gun in such nice shape. that 586 is begging to be fired. very nice find. beautiful gun

arclight610
07-14-2012, 21:49
Is that a real pistol? Where does the magazine go?

hogship
07-14-2012, 21:52
I agree........the 586-3 is one fine revolver!

http://pic50.picturetrail.com/VOL431/781008/1401653/365164601.jpg

blackbmw
07-14-2012, 22:03
i could never buy a gun in such nice shape. that 586 is begging to be fired. very nice find. beautiful gun
Oh!! Its been fired now, I wont buy a gun to not fire it. Im taking it hog huntin as a back-up when it cools down here in missouri.

Metal Angel
07-15-2012, 02:59
Get some wood grips on that thing ASAP! I love the blued finish of the 586, but black rubber grips on a blued frame? No good IMO.

Beautiful firearm!

CajunBass
07-15-2012, 04:23
<insert looking down nose, snob voice here> Well....they're "ok" but they're not P&R'ed. I guess they're nicer than a RG. :whistling: :supergrin:

Seriously, they're darned nice guns. I've come close a couple of times to buying a 586, but I've got a couple of 27's and a 28 so I've always passed.

You do gotta get some wood grips on that poor gun though. It's much to nice to have to wear those goodyears for photo opps.

257 roberts
07-15-2012, 05:03
nice,good shooting guns

pennlineman
07-15-2012, 05:10
They are nice guns. I see lots of 686's around here. Very few 586's, fewer yet in that condition. The one I really want to find is a 581.

Anyways, congrats on your new revolver!

hogship
07-15-2012, 05:29
Get some wood grips on that thing ASAP! I love the blued finish of the 586, but black rubber grips on a blued frame? No good IMO.

Beautiful firearm!


Naa........Keep the rubber grips on there. They are the best for shooting. Do get a set of nice looking wooden grips, though. Take a picture of that nice looking revolver with some nice looking grips.......then, put the rubber grips back on! The 586-3 I showed you earlier in this thread have a permanent set of Pachmayer grippers installed.


Show us the pic with the wood grips now and then........and, smile a little bit, because you know you're going to enjoy shooting it, and showing it off, too!

ooc

Here it is with the original grips. Looks great, but those target stocks are worthless for shooting purposes:
http://pic50.picturetrail.com/VOL431/781008/1425902/365164504.jpg
I don't have a current pic with the grippers, but do have this pic with some presentation grips:
http://pic50.picturetrail.com/VOL431/781008/1425902/392973044.jpg

M&P15T
07-15-2012, 05:41
http://i248.photobucket.com/albums/gg180/whitneyblocker/smith586.jpg

The Smith 586-3:supergrin:

Mint, no turn marks and all original box, papers, everything....thank you old guy who didnt shoot it and shoved it in the safe for 25 years:shocked:

Sooooo.....Jimbo bought a pistol and forgot he had it?:rofl::rofl:

Still got that $10 a shot Wetherby?

You've never seen a gun you didn't like, it's like a disease with you.:supergrin:

blackbmw
07-15-2012, 08:07
Sooooo.....Jimbo bought a pistol and forgot he had it?:rofl::rofl:

Still got that $10 a shot Wetherby?

You've never seen a gun you didn't like, it's like a disease with you.:supergrin:
HAHA!! na, he is into those $2500 pof's now. Got this off a grandpa down here who just didnt need it anymore. I sold that weatherby, just too much gun for deer, picked up a scoped marlin 336 to take its place. Dad does have my new model blackhawk that im picking up in august. bought it for him, now i want it back:whistling: And To appease the crowd I AM getting some nice wood grips, just have to order them when the wife doesnt know.......:supergrin:

Bruce M
07-15-2012, 08:12
A very fine looking revolver and I agree wood would make it look even better.

M&P15T
07-15-2012, 12:57
HAHA!! na, he is into those $2500 pof's now. Got this off a grandpa down here who just didnt need it anymore. I sold that weatherby, just too much gun for deer, picked up a scoped marlin 336 to take its place. Dad does have my new model blackhawk that im picking up in august. bought it for him, now i want it back:whistling: And To appease the crowd I AM getting some nice wood grips, just have to order them when the wife doesnt know.......:supergrin:

Don't do too much shootin', save some for August. I gotta contact your parentals to see if it's cool to visit when ya'll do. I gotta get the **** outta here for a bit, this place drives me absolutely bonkers.

Did your Dad get an optic for the POF? I wanna have a shoot off if he didn't get some sort of 12x super scope. I can't believe all the trash talking your Dad did about my AR and 5.56MM, and now he goes and buys a POF. :rofl::rofl:

Oh, and give me a call, my number is the same. And tell Jeff to call me (probably have to borrow Pat's phone, am I right?). I gotta see the little ones, I bet they're growing like weeds. Jason's son looks just like him, like someone ran Jason through a copier, set to reduce the image. Your kid too.

The_Gun_Guru
07-15-2012, 14:25
That's a great find!!!!

I prefer the 686 though....."no dash"....Like New but no box or papers....$400!!!

http://i203.photobucket.com/albums/aa310/gunguru364/utf-8BSU1HMDAwMDMtMjAwOTA3MDgtMj-1.jpg

I added the Houge grips.


TGG

K.Kiser
07-15-2012, 14:43
Love those pistols in SS or blued, just such a classicly lined firearm... I grew up shooting wheelguns with wood grips, but the first time I ran through an ammo box with a set of Hogues it was all rubber grippy grips for me from then on...

Oh man, I can feel that perfect grip angle and that sweet sharp single action trigger now if I close my eyes..

NeverMore1701
07-15-2012, 15:19
I want a 686 to go with my 29-2, but that's not likely to happen any time soon.

Golddog
07-15-2012, 19:16
I had the 586 in 3", 4", 5", 6", and 8 3/8", as well as the 5" non-full lug model, as well as variants with non-fluted cylinders. Some of those were pretty rare, but none as rare as the one I could never find: the 2 1/2". Had the 686 in all those lengths as well as the 7", which even the factory claimed (incorrectly) that it had never made.

Sold 'em all when I fell in love with CZ semi-autos.

bac1023
07-15-2012, 19:53
Very nice

I've got a 686-1 and love it. :hearts:


http://i1209.photobucket.com/albums/cc398/cutillo_2011/038-1.jpg

http://i1209.photobucket.com/albums/cc398/cutillo_2011/040-1.jpg

NeverMore1701
07-15-2012, 20:05
Very nice

I've got a 686-1 and love it. :hearts:


http://i1209.photobucket.com/albums/cc398/cutillo_2011/038-1.jpg

http://i1209.photobucket.com/albums/cc398/cutillo_2011/040-1.jpg

That with an unfluted cylinder would be just perfect!

bac1023
07-15-2012, 20:07
That with an unfluted cylinder would be just perfect!

I actually prefer fluted cylinders on DA revolvers.

I prefer unfluted on SA revolvers.

stopatrain
07-15-2012, 20:09
Very nice!

Angry Fist
07-15-2012, 20:11
Get one of these.... :supergrin:


http://i809.photobucket.com/albums/zz13/MO_FUGGAZ/SaigaHavoc2.jpg

NeverMore1701
07-15-2012, 20:18
I actually prefer fluted cylinders on DA revolvers.

I prefer unfluted on SA revolvers.

I haven't gotten around to caring much for SA revolvers. Not saying it won't happen, just not right now. I like the looks of an unfluted cylinder on just about all revolvers though :supergrin:

blackbmw
07-15-2012, 21:37
Get one of these.... :supergrin:


http://i809.photobucket.com/albums/zz13/MO_FUGGAZ/SaigaHavoc2.jpg
Damn son, that your squirrel gun?:whistling:

Angry Fist
07-16-2012, 17:14
We have huge meth hungry "squirrels" 'round heah.

69HEMI-R/T
07-16-2012, 20:16
The S&W 586 is a fine .357mag and not too bad to look at either. Congrats on your purchase. Guess I'll include a couple of pics of mine here.

http://i88.photobucket.com/albums/k195/69HEMICHARGER/P8090009.jpg

http://i88.photobucket.com/albums/k195/69HEMICHARGER/P8090007.jpg

Paul53
07-16-2012, 22:21
http://i248.photobucket.com/albums/gg180/whitneyblocker/smith586.jpg

The Smith 586-3:supergrin:

Mint, no turn marks and all original box, papers, everything....thank you old guy who didnt shoot it and shoved it in the safe for 25 years:shocked:


I want one!

Veedubklown
07-17-2012, 16:32
i could never buy a gun in such nice shape. that 586 is begging to be fired. very nice find. beautiful gun

Buying it isn't the problem for me, it's keeping it in that unfired condition. Just won't have it.

WarEagle32
07-17-2012, 16:49
Nice Roscoe! I agree with Bruce as usual that wood would look better on that particular pistol. JMO

fnfalman
07-17-2012, 18:16
I wouldn't mind buying a no-lock 586 to accompany my no-lock 686. That ebony & ivory thing.

bluejackets92fs
07-17-2012, 18:32
I was really hoping when smith reintroduced the 586 this year they would offer a 7 shot version. Until they do I will stick to my 686+. Very fine revolvers and there is definitely something awesome about a blued 6" .357 that just screams "bad ass".