mil surp. wc844 powder [Archive] - Glock Talk

PDA

View Full Version : mil surp. wc844 powder


Big Bore Fan
09-13-2012, 19:10
Well I've burned through my first few pounds of win 748 for .223. Boy that didn't take long.:rock: I might have to invest in a faster press just to keep up with the AR, that thing gets hungry.

I was going to give Tac a try because it seem's to be a big hit with others loading .223. But then I ran across the wc844 military powder which would add to my savings. So has anyone used this powder before and how did you like it. I'm loading mostly 55gr pinking stuff in a 16" ar but would like to load some 77g SMK's also. Thanks for your help.

Tree Rat
09-14-2012, 17:35
It's oustanding powder. Use H335 data. I found a sweet load with Hornady 55 FMJ and 24.0 grains.

Is this stuff in white gallon jugs from Pat's reloading?

TR

Big Bore Fan
09-14-2012, 17:50
Yea thats the only place I could find it. The stuff widners shows is in a black jug. Whats up with that?

Outdoor Hub mobile, the outdoor information engine

RustyFN
09-14-2012, 18:36
It's oustanding powder. Use H335 data. I found a sweet load with Hornady 55 FMJ and 24.0 grains.

Is this stuff in white gallon jugs from Pat's reloading?

TR

What he said.

Hey Rat long time no see. Good to see you back.

Big Bore Fan
09-14-2012, 20:30
Is there a difference between the white jug from pat's and the black jug from widener's or is it just the packaging.

Tree Rat
09-14-2012, 21:20
Have no idea. It's plausible that both sourced the same powder and put in their respective packaging.

WCC 844 surplus is a pretty straight forward item with only lot variations being the difference.


What's up Rusty......thought I'd pop back in here after awhile.


TR

labdwakin
09-14-2012, 22:27
I like WC-844 in the 223 too, next I'm going to try it in the 30-30 :)

shotgunred
09-15-2012, 07:46
Its my choice for 223 also.

Big Bore Fan
09-15-2012, 08:03
Sounds good, guess I should place my order before its all gone. Thanks guys

Outdoor Hub mobile, the outdoor information engine

DoctaGlockta
09-15-2012, 08:19
I ordered wc846 from Pat's. No experience with 844. I was going to use 846 for 223 and 308. Good luck.

bballer182
09-16-2012, 15:55
I read a huge write-up on the difference between 844 and 846 and the thing that didn't look too good to me was that the 846 is almost identical to the 844 with the addition of a substance, and I can't remember what it was, to slow the burn rate down. But, at the same time the substance was linked to premature barrel/throat erosion. And I think if I remember right 846 was super close to BL-C(2) and you can use the same data. Double check that though.

waawaaweenie
09-16-2012, 18:27
I have loaded a lot of 223 with WC846 and use the BLC-2 load data.

I just ordered 4 more jugs today from http://www.hi-techammo.com/

they have it and the WC844 in stock

I am going to try some in 308 also for some 147 gr fmj's