Lone wolf extractor vs glock [Archive] - Glock Talk

PDA

View Full Version : Lone wolf extractor vs glock


Miele87
10-06-2012, 16:55
So I bought a used g33 the other day took it to the range and it showered me in shells very one says to replace the extractor just wondering if I shud get the lone wolf or the glock replacement part thanks

Outdoor Hub mobile, the outdoor information engine

voyager4520
10-06-2012, 17:08
I would recommend first replacing the "1882" marked ejector with the new "28926" ejector. The 28926 ejector is in the newest Gen4 .40/.357 trigger housings. For some strange reason Glock has not seen fit to switch the Gen3's over to the new ejectors as they did with the Gen4's. Glockparts.com has the Gen4 .40/.357 trigger housings with 28926 ejector, I don't know about other retailers but they may have old stock that still have the 1882 ejector.

If your G33 is a Gen3, you cannot use a Gen4 trigger housing in that gun's frame. You will need to remove the Gen3 trigger housing from the frame, pull the ejectors out of both trigger housings, and insert the new 28926 ejector into the Gen3 trigger housing, then reinsert the Gen3 trigger housing into the frame. Here's a thread that talks about removing the ejector from a trigger housing:
http://glocktalk.com/forums/showthread.php?p=18115775#post18115775

If erratic ejection continues with the 28926 ejector installed, I would recommend keeping that ejector in the gun and installing a replacement .40/.357 LCI extractor.

My Gen3 G27 ejected erratically, using the extractor from my G23 which ejected fine made very little difference, the 28926 ejector fixed it.

Miele87
10-06-2012, 17:16
Thank you for your help


Outdoor Hub mobile, the outdoor information engine

SJ 40
10-06-2012, 17:21
I would recommend first replacing the "1882" marked ejector with the new "28926" ejector. The 28926 ejector is in the newest Gen4 .40/.357 trigger housings. For some strange reason Glock has not seen fit to switch the Gen3's over to the new ejectors as they did with the Gen4's. Glockparts.com has the Gen4 .40/.357 trigger housings with 28926 ejector, I don't know about other retailers but they may have old stock that still have the 1882 ejector.

If your G33 is a Gen3, you cannot use a Gen4 trigger housing in that gun's frame. You will need to remove the Gen3 trigger housing from the frame, pull the ejectors out of both trigger housings, and insert the new 28926 ejector into the Gen3 trigger housing, then reinsert the Gen3 trigger housing into the frame. Here's a thread that talks about removing the ejector from a trigger housing:
http://glocktalk.com/forums/showthread.php?p=18115775#post18115775

If erratic ejection continues with the 28926 ejector installed, I would recommend keeping that ejector in the gun and installing a replacement .40/.357 LCI extractor.

My Gen3 G27 ejected erratically, using the extractor from my G23 which ejected fine made very little difference, the 28926 ejector fixed it.Miele Welcome !
Voyager gave you the best advise he knows of which he speaks. Good Luck SJ 40

Miele87
10-06-2012, 17:33
Thanks for the welcome I'm gonna have this changed this week lie the gun and looks nice beside my g23


Outdoor Hub mobile, the outdoor information engine