Factory threaded barrels [Archive] - Glock Talk

PDA

View Full Version : Factory threaded barrels


glockusr
10-23-2012, 10:53
Does anyone have any info on the factory threaded barrels? I'm thinking of picking one up for my 19 but I wanted to know more about them. Are their different versions / generations or was it all one batch? Etc. Thanks for any and all info!

JBS
10-23-2012, 11:28
Glock G21 M16 X 1 LH
Glock G19 M13.5 X 1 LH

rimshaker
10-23-2012, 12:17
I got both for my G19 gen2 and G21sf. Easy drop ins. But they don't come with thread protectors. They're gen3 designs and use metric threads. Internal barrel rifling (twist rate) is the same as any other Glock factory barrel. Great choice if you're going the silencer route. And metric threads have several advantages over standard threads.

kodiakpb
10-23-2012, 13:02
http://glocktalk.com/forums/showthread.php?t=1422139

rimshaker
10-23-2012, 14:20
^^^ Wow great info thx. I stand corrected then.... factory threaded barrels are gen4 (and late gen3) designs. And they also work in gen2 pistols from my personal experience.

chemcmndr
10-23-2012, 20:58
I have factory barrels for my G17, G19, and G21.

All are metric threaded, and I've used the G19 barrel in both a Gen 2 and Gen 3 gun and the G21 barrel in a Gen 2 gun. They lock up tight to my suppressors and they feed ammunition reliably. I switched to them after having issues with some Lone Wolf barrels not wanting to chamber some of my reloads. The Glock barrels handle them without a problem.

I was able to get AAC thread protectors for all of them for $25 each and they have the o-ring inside to interface with the barrel for a tight lockup.

As of right now, I think Glock only has these three threaded barrels on the market.

rimshaker
10-24-2012, 21:47
You can also use the G19 threaded barrel on a G26 just fine. The barrel will just stick out an xtra inch. Not the prettiest looking but still works with a can reliably.

glockusr
10-25-2012, 21:40
Great, thank you for the info folks!

seaswol
10-25-2012, 21:54
I put a Glock threaded barrel on my new G19 Gen4. Have never had a FTF, BTF or FTE. So obviously the problems are with standard barrels:rofl::rofl::rofl:
Chris

Bruce M
10-26-2012, 05:26
I put a Glock threaded barrel on my new G19 Gen4. Have never had a FTF, BTF or FTE. So obviously the problems are with standard barrels:rofl::rofl::rofl:
Chris
:rofl::rofl: Finally! A true solution to the problem

seaswol
02-28-2014, 14:04
1650 more round thru my G19 Gen 4 with a Glock threaded barrel and NO BTF, (all reloads). Certainly seems like the perfect solution. Just won't sell of my factory G19 barrel yet. Maybe this is the solution to my new BTF G30 Gen 4 or maybe just sell it.

nraman
03-09-2014, 00:17
I have factory barrels for my G17, G19, and G21.

All are metric threaded, and I've used the G19 barrel in both a Gen 2 and Gen 3 gun and the G21 barrel in a Gen 2 gun. They lock up tight to my suppressors and they feed ammunition reliably. I switched to them after having issues with some Lone Wolf barrels not wanting to chamber some of my reloads. The Glock barrels handle them without a problem.

I was able to get AAC thread protectors for all of them for $25 each and they have the o-ring inside to interface with the barrel for a tight lockup.

As of right now, I think Glock only has these three threaded barrels on the market.

Where can I get a factory threaded barrel?
Thanks.

loneeagle
03-09-2014, 00:22
Where can I get a factory threaded barrel?
Thanks.

http://www.gem-tech.com/store/pc/GLOCK-Factory-Threaded-Barrels-19p1022.htm

ejjeff
03-09-2014, 06:24
Has Glock ever made threaded barrels for 40 cal pistols?

nraman
03-09-2014, 12:25
http://www.gem-tech.com/store/pc/GLOCK-Factory-Threaded-Barrels-19p1022.htm

Thanks.