Gen 4 G19 arrived!!! [Archive] - Glock Talk

PDA

View Full Version : Gen 4 G19 arrived!!!


mike g35
11-24-2012, 06:32
The Gen 4 G19 I got with my pistol certificate from Marietta arrived at my local gun shop yesterday. That was pretty fast!!! I'm thinking of doing a UL build with it (I know, big surprise right?), something that leans more towards tactical shooting as opposed to a typical racegun. Just thought I'd share in case anyone else had ordered one. They must have just finished a run. I couldn't wait for the Gen 4 26, so I just bought it at my job, using my hefty employee discount of course. :)


Posted using Outdoor Hub Campfire (http://www.outdoorhub.com/mobile/)

PM720
11-24-2012, 18:22
Wow, that was fast! Didn't you order this like a month ago? :dunno: watch out for that BTF!! :whistling: :rofl:

Scott

yobohadi
11-24-2012, 20:41
When did you send them your cert?

DannyR
11-25-2012, 08:08
Here we go again, Mike's UL Glock #16. I suggest you shoot it stock for a while. You may just learn to like it.

mike g35
11-25-2012, 09:36
When did you send them your cert?

About 6 weeks ago!!!! That was pretty fast!!!


Posted using Outdoor Hub Campfire (http://www.outdoorhub.com/mobile/)

SARDG
11-25-2012, 10:22
Here we go again, Mike's UL Glock #16. I suggest you shoot it stock for a while. You may just learn to like it.
I guess if Mike bought a Derringer, he'd try to make a UL gun out of it. :rofl:

PM720
11-25-2012, 14:54
I guess if Mike bought a Derringer, he'd try to make a UL gun out of it. :rofl:

:faint: :rofl::rofl::rofl:

9mmdude
11-25-2012, 15:00
Mike,

What you are hearing here is Random win Jealousy :rofl:

Carry on with the project until you get the G26 unlimited.

Melissa5
11-25-2012, 15:12
Mike, at my AR class yesterday, the Air Force guy that was teaching the class had a G19 that had an RMR milled into the slide. He let everyone shoot it and it was awesome. Are you still thinking about doing something like that?

mike g35
11-25-2012, 15:20
Mike, at my AR class yesterday, the Air Force guy that was teaching the class had a G19 that had an RMR milled into the slide. He let everyone shoot it and it was awesome. Are you still thinking about doing something like that?

Yep. That's the plan. That's what I'm thinking right now anyway. I figured a slide milled for a Trijicon RMR along with suppressor sights would be a good step one. Then I was thinking about having Bobby do some "Mitchell" cuts with inlay along the slide to increase cycle rate and add some cerakote refinishing to add my own personal touch to it.. Later on I will add a threaded KKM barrel and a Gen 4 Carver magwell.


Posted using Outdoor Hub Campfire (http://www.outdoorhub.com/mobile/)

mike g35
11-25-2012, 15:26
I guess if Mike bought a Derringer, he'd try to make a UL gun out of it. :rofl:

Haters are gonna hate I guess LOL :rofl: Truthfully and as you ALL well know I just enjoy shooting dot guns, and since that's what I shoot the most in competition and its what I train with the most why shouldn't I use something similar for home defense? Not carry mind you, got a G26 for that, just for home defense and the occasional UL div. at a GSSF match. Wouldn't be competing with it much, I'm sure it wouldn't even compare to the G17 NOVA racer Bobby built me. But I think it will be a cool gun to shoot none the less.


Posted using Outdoor Hub Campfire (http://www.outdoorhub.com/mobile/)

Melissa5
11-25-2012, 15:29
Yep. That's the plan. That's what I'm thinking right now anyway. I figured a slide milled for a Trijicon RMR along with suppressor sights would be a good step one. Then I was thinking about having Bobby do some "Mitchell" cuts with inlay along the slide to increase cycle rate and add some cerakote refinishing to add my own personal touch to it.. Later on I will add a threaded KKM barrel and a Gen 4 Carver magwell.


Posted using Outdoor Hub Campfire (http://www.outdoorhub.com/mobile/)

Can Bobby do the milling and mounting for the RMR or will you be sending it somewhere else? I know One Source Tactical and Bowie Tactical do this kind of work.

emtjr928
11-25-2012, 15:34
I guess if Mike bought a Derringer, he'd try to make a UL gun out of it. :rofl:

http://www.amderringer.com/pix/m8scope.jpg

:dunno::rofl:

Don At PC
11-25-2012, 15:38
Mike if you are thinking about using it in a GSSF match better check the rules. I don't have them handy right now but they use to state that "No sights could be milled into the slide in any category", don't know if it still says that or not.

Don

mike g35
11-25-2012, 15:47
Can Bobby do the milling and mounting for the RMR or will you be sending it somewhere else? I know One Source Tactical and Bowie Tactical do this kind of work.

The milling is the part I'm not sure about right now. Not sure that the suppressor sights are gonna give me any advantage and the dot in the dovetail would allow me to go back to stock later should I chose to do so. You never know, I might just throw a set of night sights on it and call it a day. :dunno:
I think a 17 may be a better candidate for this type of project anyway. And since I plan on getting a Gen 4 for GSSF I could use my Gen 3 RTF2 for "tinkering" with the RMR.

mike g35
11-25-2012, 15:48
http://www.amderringer.com/pix/m8scope.jpg

:dunno::rofl:

Ok, even I think that's going too far LoL :rofl:


Posted using Outdoor Hub Campfire (http://www.outdoorhub.com/mobile/)

SARDG
11-25-2012, 16:08
Mike if you are thinking about using it in a GSSF match better check the rules. I don't have them handy right now but they use to state that "No sights could be milled into the slide in any category", don't know if it still says that or not.

Don
Nearly anything goes in UNL Don, except those noted below. I have a Doctor sight milled into my slide. I've seen many at GSSF so hope we all haven't been guilty of any transgressions.

45.0 Illegal parts in the “Unlimited” Division:
• “Carbine Conversion” units (no shoulder stocks)
• Aftermarket metallic replacement frames.
• Any conversion kit that does not fire a round for
which GLOCK manufactures a firearm (see section
50.)

UNLIMITED
170.130 This division is open to all competitors; both Master
and Amateur, who use a GLOCK firearm that
has aftermarket components or modifications that
are not allowed in the “stock” divisions (see section
40.00). Competitors may also use the same
stock GLOCK firearm they used in firing the Civilian,
Guardian, Subcompact, Competition, Heavy Metal,
or Master-Stock divisions. The only stock GLOCK
model excluded from this division is the G36 (due
to its relatively limited magazine capacity). Shoulder-
stock devices and similar “Carbine Conversion
Units” may not be used. All competitors compete
equally and there are no special category awards.

S.Kargoh
11-26-2012, 10:00
I plan on doing the same with my g21 when it comes. Not for competition, but for a nightstand /hd gun.

mike g35
11-26-2012, 14:24
I plan on doing the same with my g21 when it comes. Not for competition, but for a nightstand /hd gun.

I think the red dot for defense is starting to catch on more. Seems everyone is using a reflex sight on one gun or another nowadays. The G21 should be pretty cool. I chose the G19 so I could carry it AIWB if I ever decided to do so. I'll most likely stick to my G26 for EDC though.


Posted using Outdoor Hub Campfire (http://www.outdoorhub.com/mobile/)

S.Kargoh
11-26-2012, 15:53
I think the 19 will be awesome in that roll, and will also make a nice Carry gun.


For anyone who hasn't seen the concept , here is what it is :


Modified 9mm Glock 19 w/ Trijicon RMR, Surefire - YouTube




Keep us posted on it.

mike g35
11-26-2012, 16:22
I think the 19 will be awesome in that roll, and will also make a nice Carry gun.


For anyone who hasn't seen the concept , here is what it is :


Modified 9mm Glock 19 w/ Trijicon RMR, Surefire - YouTube (http://www.youtube.com/watch?v=MLgxKc8FFSU)


Keep us posted on it.
Sure will. I haven't decided whether or not I'm milling the slide yet. I plan on starting with the reflex mounted in the dovetail and see how I like that. If I feel the sights and/or the dot being lower to the slide would help I'll look into milling it.




Posted using Outdoor Hub Campfire (http://www.outdoorhub.com/mobile/)

PM720
11-26-2012, 17:01
Just an FYI but my Kaspersky AV shows that derringer pic as having potential malware so be careful here! :dunno:

Scott

mike g35
11-26-2012, 17:27
Just an FYI but my Kaspersky AV shows that derringer pic as having potential malware so be careful here! :dunno:

Scott

Thanks Scott!!!


Posted using Outdoor Hub Campfire (http://www.outdoorhub.com/mobile/)

emtjr928
11-26-2012, 17:55
Just an FYI but my Kaspersky AV shows that derringer pic as having potential malware so be careful here! :dunno:

Scott
I scanned it as I always do before posting a searched picture and it came up clean! :dunno: