Help with first mod [Archive] - Glock Talk

PDA

View Full Version : Help with first mod


crash_gsxr750
01-19-2013, 09:48
I ordered a ghost 5lb tactical (trigger overstop tab)

I don't plan on doing any polishing of components, I'm planning on tuning the over travel stop and try it like this

Is this a good plan, anyone else shooting the 5 lb connector this is my first attempt at modding my glocks

I'm thinking of putting it in my G34 or G21 ( my G34 is standard 5.5 lb connector it's blue box)

Bruce M
01-19-2013, 10:41
Safe guess this is not going into a defensive gun?

24601
01-19-2013, 11:37
I run a 3.5 ghost rocket on all my glocks including my ccw... have fun grinding that tab... ensure you have the orange half back plate prior to starting this... it's a pita to grind, reassemble and test over and over , but once you get it set you'll never have to touch it again...


Posted using Outdoor Hub Campfire (http://www.outdoorhub.com/mobile/)

24601
01-19-2013, 11:40
go to their site and find the Dave Spaulding cut... that's the angle I use...

up1911fan
01-19-2013, 11:40
Take's a lot of fitting to get it right. I've come to prefer the dot connector in Gen4 format.

crash_gsxr750
01-19-2013, 14:05
Take's a lot of fitting to get it right. I've come to prefer the dot connector in Gen4 format.

I was thinking about getting one of them by all mine at gen 3's I hear the dot connector is very nice though in the Gen 3 if you can find one to buy

crash_gsxr750
01-23-2013, 21:24
Ok so I fitted trigger connector and when trigger is pulled back the striker fires and I've done a couple dozen or so dry fires

I went to take slide off frame and now can't get the slide to come off

Any ideas as to why slide won't come off yet the striker is released?