200 gr Coated SWC [Archive] - Glock Talk

PDA

View Full Version : 200 gr Coated SWC


J Lee
05-29-2014, 13:15
Anyone load and shoot these in their G21? Going to buy some and wondering how well they shoot/feed. Loading over IMR 700X.

WeeWilly
05-29-2014, 13:36
I load both coated and uncoated for both my 1911's and G21SF. When the uncoated are all gone it will be only coated.

I load them so the bearing surface is about 1/16" above the case mouth, crimp to .469-.470". 5grs should get you in the 850fps range. Great target load.

J Lee
05-29-2014, 13:50
I load both coated and uncoated for both my 1911's and G21SF. When the uncoated are all gone it will be only coated.

I load them so the bearing surface is about 1/16" above the case mouth, crimp to .469-.470". 5grs should get you in the 850fps range. Great target load.
Thanks. Getting ready to order my 550b .45 conversion and jump in. Will order the SNS variety.

WeeWilly
05-29-2014, 14:10
I am starting to use the SNS coated almost exclusively for my target shooting. I really like their product, well run company, good pricing, excellent communications, etc.

Good luck, tell us how you do along the way.

J Lee
05-29-2014, 14:30
I am starting to use the SNS coated almost exclusively for my target shooting. I really like their product, well run company, good pricing, excellent communications, etc.

Good luck, tell us how you do along the way.Will do. Thanks.

unclebob
05-29-2014, 14:57
I would get the round nose over the SWC. I have had the least amount of trouble with the round nose.

dkf
05-29-2014, 15:38
SWC can be problematic in Glocks. If you don't have other .45s you could run them in I would buy as small of an amount as you can to test out first.

J Lee
05-29-2014, 18:44
SWC can be problematic in Glocks. If you don't have other .45s you could run them in I would buy as small of an amount as you can to test out first.
SNS doesn't offer less than 500.

unclebob
05-29-2014, 19:17
SNS doesn't offer less than 500.

Try bayou bullets. They have samples amounts.

WeeWilly
05-29-2014, 19:25
SNS doesn't offer less than 500.

I will buy them from you if we can't make them work in your gun. My G21SF eats them perfectly.

In fact, I had some Xtreme copper plated SWC's that I did have problems with a few of my 1911's, I shot them up with my G21.

dkf
05-29-2014, 20:41
SNS doesn't offer less than 500.

Plant any extras in the garden and you will get boolit plants.

J Lee
05-30-2014, 14:22
SWC can be problematic in Glocks. If you don't have other .45s you could run them in I would buy as small of an amount as you can to test out first.
Have a Kimber 1911 that I will also load for.

dkf
05-30-2014, 21:12
Have a Kimber 1911 that I will also load for.

In that case I would order 500 or 1000. Should work in the 1911 if the Glock don't like them.

J Lee
05-30-2014, 21:30
In that case I would order 500 or 1000. Should work in the 1911 if the Glock don't like them.Good idea.:thumbsup:

ilgunguygt
05-31-2014, 02:04
My go to target load for a long time was a 200gr LSWC loaded over 4.6gr of 700x. My G21 ate them up!!


Sent from my iPhone using Ohub Campfire

Beanie-Bean
05-31-2014, 14:43
I've shot quite a bit of Bayou Bullets 200 gr. LSWC with no issues, using Unique and W231. They have a green coating on them, and are not smoky when you shoot.