Welcome to the 10mm Reloading Forum!!!! [Archive] - Glock Talk

PDA

View Full Version : Welcome to the 10mm Reloading Forum!!!!


MCNETT
08-22-2003, 01:02
I wanted to be the first to welcome everyone to the newest forum on GT. It has been a long time coming and I am sure it will be worth the effort. Feel free to talk about anything having to do with 10mm loads, chrono data, data, accuracy, etc. 10mm shooters, it is your forum!
-Mike McNett

The following has been added by Tazz10m:

All people looking at the Reloading and 10mm Reloading Forums must read this disclaimer:

Reloading ammunition is inherently a dangerous activity. Please scrutinize all loads, comments, and suggestions provided by all persons posting on these forums. They are individual opinions and not endorsed by GlockTalk or any of its agents or employees.

Please reference manufacturer's reloading data for safety tips and maximum charges. Do not exceed manufacturer's recommended maximum limits. Some firearms may not withstand these loads. No warranties are provided. Consider your firearm and this data in tandem. Use extreme care and caution when working up loads. Use this data at your own risk.

If something happens, you have been warned.

Eddie C.
08-22-2003, 07:50
Hey congratulations everyone! I think that's great. The Mods on this forum and members lobbied hard to open this forum. I hope you guys enjoy it. I don't own a 10mm yet but if Brooks keeps after me that may change!;)
Again, good luck!;f

08-22-2003, 08:58
YEAH!!!! ;? ;W ;9

Been looking forward to this!

Tazz10m
08-22-2003, 09:06
What the...??? Did i wake up into a dream??? Is this for real???

Wait! Eddies real.... well, in real life he's real anyway... if i get a response out of him, maybe that will prove this isn't some sort of cruel joke.

Hey Eddie.... repeat after me.... Got to get a 10.... Got to get a 10... Got to get a 10.... Got to get a 10... Got to get a 10.... Got to get a 10... Got to get a 10.... Got to get a 10...

;f

HEY MCNETT!!! WAAAZZZZUUUUP????

WE'RE HERE!!! WE'RE HERE!!! WOOHOOOOOO!!!

...oh wait... this could still be a dream......;P

Eddie C.
08-22-2003, 09:11
I have this overwhelming urge to fondle a G20 or G29. What could that be about?;P

















;f ;f ;f

08-22-2003, 09:21
Originally posted by Eddie C.
I have this overwhelming urge to fondle a G20 or G29. What could that be about?;P


Gotta tell ya, Eddie, I picked up a used G20 (2nd gen adj sights < $450.00) a short while back, and I'm in serious LUV here. So much so that I'm considering getting rid of my G22's.... (that scares me)

Steve

Jumper
08-22-2003, 09:42
Originally posted by sjstill
Gotta tell ya, Eddie, I picked up a used G20 (2nd gen adj sights < $450.00) a short while back, and I'm in serious LUV here. So much so that I'm considering getting rid of my G22's.... (that scares me)

Steve

...and so another prostelyte (sp?) has begun the inevitable journey down the path of 10mm enlightenment. Welcome brother ;f

TScottW99
08-22-2003, 11:37
Know what ya' mean Eddie.... just left the gun store and was fondling a Glock 20. Now I just need the $$$$$ ;f

08-22-2003, 11:46
Originally posted by Jumper
...and so another prostelyte (sp?) has begun the inevitable journey down the path of 10mm enlightenment. Welcome brother ;f

I can hear 'Ol Darth's voice in my head now; "Steve, come over to the dark side..."

I don't really hear voices in my head. Honest....

Steve

AC37
08-22-2003, 12:04
This forum is finally open? Am I still dreaming or awake? ;P

ECVMatt
08-22-2003, 12:15
good luck and best wishes.

Matt

Tazz10m
08-22-2003, 13:33
Originally posted by sjstill
I can hear 'Ol Darth's voice in my head now; "Steve, come over to the dark side..."

I don't really hear voices in my head. Honest....

Steve

Actually, coming over to the 10mm side is not coming over to the dark side... it's really coming over to the Light side... it's everybody else that's in the dark.... ;i

Hear that Eddie? Just a little something for you to consider. We'll leave a Light on for ya. ;f

swampmaster
08-22-2003, 14:42
YIPPIE !!!!!!!!;Y ;Y ;Y This makes me so Happy.

Now if we can get MCNETT to publish a reloading guide just for the 10mm

Mwinter
08-22-2003, 16:23

AndABeer
08-22-2003, 16:23
kewl, just received several flavors of VihtaVuori from Powder Valley Inc via UPS, look forward to posting the results here soon

;c

G7
08-22-2003, 22:38
HOOO-WAAAH !!!

;P :) :cool: ;e ;f ;a ;) ETC . . . ETC . . . ETC . . .

GOTTA GET A CHRONOGRAPH . . . GOTTA GET A CHRONOGRAPH . . . GOTTA GET A CHRONOGRAPH . . . GOTTA GET A CHRONOGRAPH . . . GOTTA GET A CHRONOGRAPH . . . GOTTA GET A CHRONOGRAPH . . . GOTTA GET A CHRONOGRAPH . . .

0100010
08-23-2003, 10:46
Wow! This forum is finally open, I don't beleive it.....

I guess it's finally time I pick up a G29, and all that reloading gear too. Can't be too hard to start out reloading on 10mm and .357sig. ;g

Saw your website Mike, looks great, good luck with the new forum and the new site. Hopefully I can expand my knowledge and enjoyment of firearms even more here.

08-23-2003, 11:27
Originally posted by 0100010
Wow! This forum is finally open, I don't beleive it.....

I guess it's finally time I pick up a G29, and all that reloading gear too. Can't be too hard to start out reloading on 10mm and .357sig. ;g


I'm not an expert reloader by any means, but learning on 357 SIG might be counter-productive - bottlenecks are a pain in the, well, neck. No carbide dies (unless you have $$$), gotta lube every one, etc, etc...

Straight wall pistol (& rifle) cases go a lot faster ;f

My 0.02,

Steve

0100010
08-23-2003, 22:21
....learning on 357 SIG might be counter-productive....


I know, I know.... ;f Although I do want both a G29, and to eventually start reloading, it is something that I will have to work up to. I will get a G29 one day. Then a while later start out with a reloading setup. On my current budget, it will be a while before I am where I want to be financially, but once I'm there I can treat myself to a new "toy" much more often.

I think it was more the amazement of the new forum opening, than anything else.... ;f

MakeMineA10mm
08-24-2003, 05:59
HOLY &#!@

It's open...???? I must've missed a meeting!!!!;f;f;f

Eddie C.
08-24-2003, 06:42
Originally posted by MakeMineA10mm
HOLY &#!@

It's open...???? I must've missed a meeting!!!!;f;f;f



Nope. We just kept it from you! LOL ;i ;)



Good luck again guys! It looks like it's going to be a big hit!;f ;f ;f

KK20
08-24-2003, 07:04
there is no locally produced 10mm so i had to reload all my own for close on to 10 years now.

Davis
08-24-2003, 10:20
Originally posted by G7
HOOO-WAAAH !!!

;P :) :cool: ;e ;f ;a ;) ETC . . . ETC . . . ETC . . .

GOTTA GET A CHRONOGRAPH . . . GOTTA GET A CHRONOGRAPH . . . GOTTA GET A CHRONOGRAPH . . . GOTTA GET A CHRONOGRAPH . . . GOTTA GET A CHRONOGRAPH . . . GOTTA GET A CHRONOGRAPH . . . GOTTA GET A CHRONOGRAPH . . .

Ditto Ditto MegaDittos

I am soooooo happy

Thanks to all who made this dream a reality;W

kestrou
08-25-2003, 16:19
As my momma would say: "well sheeeut my mowth!" :)

I've been offline shooting my Glocks instead of shooting my mouth off here - not checking in as often - won't believe this forum is actually open and working until I see this post! ;f

kestrou

MCNETT
08-25-2003, 20:49
By now you've noticed that I have broken the data fields down by powder. You guys are free to add data that you have to this at your own will! Try to include as much info as possible regarding OAL, primers, bullet used, temp, elevation, and pressure signs.
-Mike

redskyzatknight
08-25-2003, 23:10
yeah!!:) It's for real! Now, for the first dumb ? - For a beginner wanting a quality startup reloading press, what to go for? I think Dillon ***? what else would one need to roll their own? This is so cool, I have a whole room waiting.

08-26-2003, 07:27
Originally posted by redskyzatknight
yeah!!:) It's for real! Now, for the first dumb ? - For a beginner wanting a quality startup reloading press, what to go for? I think Dillon ***? what else would one need to roll their own? This is so cool, I have a whole room waiting.

I have a Square Deal B I got used off ebay, and have not regretted it one bit. Unless you plan on doing rifle cartridges, ithe SDB is an inexpensive setup. I'm loading 45ACP, 40 & 10mm. I splurged and bought a 2nd 40/10 die set 'cause it IS a pain in the rear to adjust between 40 & 10. Not much on paper, but a hassle in practice ;g

Steve

G33
08-26-2003, 10:17
;+

Jumper
08-30-2003, 09:11
Originally posted by redskyzatknight
yeah!!:) It's for real! Now, for the first dumb ? - For a beginner wanting a quality startup reloading press, what to go for? I think Dillon ***? what else would one need to roll their own? This is so cool, I have a whole room waiting.

I have a Lee Loadmaster that loads 10mm and 45ACP just fine. You can probably pick up a used one less than $100.

21 shooter
09-22-2003, 21:15
I guess I missed the meeeting for this one. I am glad to see this forum up and running.:)

glock durban
09-24-2003, 11:45
thank you for opening this forum,long over due.
let the safe fun begin.

pistolero6869
10-09-2003, 18:36
Just fired my new G-20 today! Trying to empty some of the 700 Rds of factory stuff I got with it cor-bons, PMC, winchester, blazer. I started with the Blazer to see where the brass was going. I really like it so far very powerful Handgun! I will be reloading for it so this should be a great forum. I need Brass!!! Shoot Safe GFM

Rigormootis
10-13-2003, 21:40
...it's 'bout time. Let the learning begin! :)

VN350X10
11-23-2003, 16:00
I must of missed the meeting along with Make Mine a 10...Glad to see that this forum is finally a reality.

The G-20....What Darth Vader uses when he needs an EFFECTIVE sidearm.


Thanks to the folks that made this one happen. I'll be contributing the load data that we've developed over the years for IPSC/USPSA & IDPA competition, & also tell what DIDN'T work & why/what happened.

uncle albert

Alaska Bush Man
05-25-2005, 15:27
Hello from the "The Last Frontier" just bought a Glock 20 1st Gen in excellent condition....like new. Plan on using it as home protection pistol and pack gun on the bear stand. Does anyone have some favorite handloads for hunting. I plan on using the 190 FPJ Sierra bullet. Thanks

Glolt20-91
08-23-2005, 17:18
Well I'm new to Glocks, bought my first about two months ago and the 10mm has to be one of the best kept secrets that many overlook. :) Now that I've been playing with Blue Dot for awhile I can check other threads and see if I've done things right. ;a

I bought a G20 with OD grips and it's pretty comfortable to shoot.

Adios,
Bob

urbanjunglist
09-24-2006, 13:16
Why is it that the 10mm never really took off? The caliber is the best of all worlds condensed into one, what more can you ask for?

Glocker 4 Life
09-28-2007, 16:44
I now know where much of my time is going to be :thumbsup:

Got my G20 recently and now found a great place for reloading info. My Rock chucker is setup for 9mm, but that can be easily switched over

Great Forum :thumbsup:

Scott

srfl
09-28-2007, 21:38
A reloading forum for us 10mm fans???

Sweet!

I have some 175 grain loads I brewed in anticipation of getting my G20 back from Robar (only to be followed up with a trip to Bar Sto to get a match barrel installed).

Wiskey_33
10-02-2007, 07:23
Well,
I'm glad that this page is around. I'm sitting here waiting for my 550B to come in so I can start pumping out some 10mm. Anyhow, what's the best place online to order brass and bullets? I wanna get the powder/primers local to avoid HAZMAT fees. Anyhow, I'm thinkin' 150-180 grain FMJ's for plinkin' and some 180 Gold Dots for things that go bump in the night. Anyhow, thanks guys and I look forward to the suggestions.

Daryl in Az
10-05-2007, 10:02
You can order brass direct from Starline. http://www.starlinebrass.com/

MidwayUSA also sells Starline brass for a few dollars more per 500/1000, and you can order bullets at the same time to possibly save on shipping costs.

Lots of others, I'm sure. If anyone knows of a cheaper place for either, I'd appreciate it too. I'm going to order brass and bullets pretty soon.

Daryl

mesteve2
05-13-2009, 17:37
Got some old data.

Unique and other old powders.

Let me know if interest.

jeremiahjj
09-12-2009, 21:26
Is the 10mm forum still alive somewhere?

MakeMineA10mm
09-13-2009, 12:25
Is the 10mm forum still alive somewhere?

If you mean here at GT, yes, it's called "the 10 Ring" and it's just two forums above this one on the list of forums here at GT.

If you're talking about another website, I'm not sure. The only other 10mm website I look at regularly is the Bren Ten forum.

jeremiahjj
09-13-2009, 14:57
If you mean here at GT, yes, it's called "the 10 Ring" and it's just two forums above this one on the list of forums here at GT.

If you're talking about another website, I'm not sure. The only other 10mm website I look at regularly is the Bren Ten forum.

Got it, and thanks! I guess I missed the 10 Ring. The Firing Line Forum has stuff for 10mm shooters/reloaders too. I'm finally getting set up -- bench is built, 4 lbs of powder (No. 9, 800X, HS6, etc.), primers and cases are ready. All I'm missing is the press, which some suggest might be helpful. That should be here in 2-3 weeks. It'll be a 550. Thanks again. See you over at the 10 Ring.

Denny
04-02-2012, 09:31
I just finished my Glock 20 for hunting Now its time to RELOAD

ohio glock guy
04-30-2012, 13:29
Hello to all glockers,
what's a good handload in 10mm,6inch pipe,deer hunting?
Any and all thoughts welcomed..

glockout
06-12-2012, 07:53
I have been a member of GT for 5 years. Just found this forum. Was doing a search on the internet for 10mm forum and this one popped up. Glad I found it.

I have a 19,20,23,27.

Cwlongshot
06-12-2012, 08:57
Hello to all glockers,
what's a good handload in 10mm,6inch pipe,deer hunting?
Any and all thoughts welcomed..

Get yourself a can of Longshot maybe 800X too. Then some 180/200g XTP or a WFN hard cast lead of 200g. Start loading!

Good luck,
CW

gunowner1
10-25-2012, 19:54
Almost got my reloading set up ready. I am going to start with 9mm. I did get 500 rounds of 10mm brass to start getting ready to reload 10mm in the near future. All I need to know is what type of bullets to buy. I just need bullets for punching paper.

kdunn
11-04-2012, 17:22
I'm very happy to have found my new hang out! A couple of months ago I purchased a G29 and have shot it enough to love it. (It's a little modified) And enough to hate the cost.
I just ran across a TGTPU deal on a Hornady LNL AP setup and now I have to build a bench and start making cartridges. What a perfect time to find this forum. Really looking forward to reading all the posts and data and trying out some of the recipes here!

Kirk