Let's see your AR(Pic thread)......

[AZG23]

AimPoints....

[Pete250R]

interesting...do they make the mounts as well?

[AZG23]

I believe they have their own mount...I know for sure that there are several other manufacturers that make better mounts...A.R.M.S is one...GG&G also..Im sure there are more that other will elaborate on....spend a day on AR15.com in the AR15 forum under optics and sites..you will learn a ton..

http://www.ar15.com/forums/forum.html?b=3&f=18

[USMCsilver]

Originally posted by Pete250R
interesting...do they make the mounts as well?

A.R.M.S. #22M68 is a very common one.

Knights Armament also makes a nice one.

GG&G has one.

LaRue Tactical has one as well.

There are off brands that are less expensive, but the point in a good mount is to get 100% line-up when the optics are removed and then replaced.

Be prepared to spend ~$100 or so on a mount. The scopes run about $400 new. Check out the Equipment Exchange over at AR15.com in the optics section. You can get good deals there. My last one was $150 shipped and included a factory mount. My buddy just picked one up from over there for $175 with two different mounts.

Deals are out there.

[Pete250R]

thanks for the info!

[MStarmer]

Looks like Aimpoint's..

[DreamWeaver88]

http://pic2.picturetrail.com/VOL30/138216/416474/65501009.jpg

[bgcc11]

** Edited by Moderator; please post "For Sale" items in the classified area ONLY! **

[guncollector]

Here's mine...my homebuilt Post-Ban configured (soon to change?) AR built on a Bushmaster XM15 receiver.

http://home.comcast.net/~guncollector/pics/bushxm.jpg

[Terminator]

I need a good hosting pic site, but here it is until i get one.
here is my m4 beside my VEPR.
ftp://davhamer:thetax@home.bellsouth.net/m4.jpg

[Butch]

Originally posted by Terminator
I need a good hosting pic site,
http://photobucket.com/





;?

[Terminator]

Thanks bro

Ok, here it is.


http://img.photobucket.com/albums/v381/ST5_Terminator/P1000490.jpg

[DJack]

MY baby. She will get a A1 bird cage on 9-14-04 if all goes right

It's not exactly black but it'll do. Love that A.W.

Buy an Assault Weapon / Scare a Liberal:soap:

[DJ Niner]

Wassat, a DaeWoo K2?


Sweeeeeeeet...

Close. It's the K1A1

[DJ Niner]

They didn't bring very many of those in-country before one of the Bans shut off the flow, IIRC. I've never handled the telescoping-stock version, but I shot the original fixed-stock one MANY years ago. I was favorably impressed with it at the time.

Has a high "cool-factor" IMO...

[MikeG23]

Great pics.:)

[sideshow]

Here's my new AR ... less than 2 hours old!

[ZigG17]

Here's what mine looked like before it was lost in a fishing accident.
http://home.comcast.net/~k.zig/M4.3.JPG

Gitchigumie.;g

[DJ Niner]

Attention! There is another photo thread available for newly-modified, after-ban weapons! Check it out!

[CPUFed]

Bushmaster M4 A2 LE, Surefire 6p, Aimpoint ML2

http://img.photobucket.com/albums/v505/cpufed/IMG_1039.jpg

http://img.photobucket.com/albums/v505/cpufed/IMG_1040.jpg

[Michigun]

My Bushmaster A2 Dissipator:

[RayDog]

Well I’ve been getting rid of some things in the safe that weren’t getting used as much as I thought they should and ended up trading for this upper. It’s a free floated Bushy 20” heavy barrel. The USO SN4 I’ve been waiting on for my 16” AR showed up but I thought I’d mount it on this thing and see how she shoots. It has some weight to it but I think if it will hold MOA or better it could be an awesome urban SWS. The AAC can makes the 16” pretty dam quiet so I’m expecting even less sound from the 20”. I’ll try to get out tomorrow and get a range report.

http://images.prosperpoint.com/images/2067/104389-65.jpg

[Bushw@cker]

http://img168.exs.cx/img168/6872/ar6fo.jpg

[Mushinto]

Originally posted by Mushinto
w/ Aimpoint ML2, Surefire 976 and Samco Vertical Grip.
ML
I went back and discovered that I never attached the picture.

[dlooper]

Will once I can add a strike plate and Beta C Mag I'll be content for a while.

16'' AR15 C.A.R. Target Kit, 5.56 NATO, chrome lined chamber & bore, 1-9 twist, target crown
DPMS Lower
Chrome carrier group
Hogue grip
First Samco M-33 Handguard Set
First Samco Tactical Light Holder
Surefire
TDI Arms Folding Vertical grip
Magpul M93A2-R stock
CQB Solutions single point sling
4x20 Illuminated mil-dot scope

http://img.photobucket.com/albums/v665/abandonallhope/ar.jpg

[getdown_glocker]

My Bushmaster M4A3 (with my HK USP45c):

http://www.interintense.com/hkusp45c/hkusp45c_and_m4a3.jpg

[maxxx93]

http://www.picyard.com/main/data/500/4000_0404a-med.jpeg

http://www.picyard.com/main/data/500/4000_0411a-med.jpeg

[Michigun]

Bushmaster A2 Dissipator:

http://img.photobucket.com/albums/v733/Michigun/AR/100_16742copy.jpg

[True Punisher]

Originally posted by Michigun
Bushmaster A2 Dissipator:

Cool looking pic... ^7

[Michigun]

Originally posted by True Punisher
Cool looking pic... ^7

Thanks! (Just another nifty button I found in my Adobe Photoshop Elements 2.0 software. ;))

[KinderGlocken]

http://img.photobucket.com/albums/v738/TheJH/AR-scope.jpg
http://img.photobucket.com/albums/v738/TheJH/Target.jpg

[True Punisher]

Originally posted by Michigun
Bushmaster A2 Dissipator:

Did you build that or buy it that way? I mean where did you get the whole rifle or where did you buy the extra parts and what bushmaster did you tart with?

;P

I have been looking at a RRA, but you have have just turned me onto Bushmaster alot more then I was thinking...

[Michigun]

Originally posted by True Punisher
Did you build that or buy it that way?

My AR started out as this exactly…

http://img.photobucket.com/albums/v733/Michigun/AR/pcwa2s16d.jpg

… a “post-ban” configured Bushmaster A2 Dissipator.

I’ve added the following:

(in order from stock to muzzle)

* 6-position collapsible stock assembly
* Brownells modified CAR-AMBI sling mount
* Single-point MOUT sling
* ACCU-Wedge (what he heck, figured I’d add one to my Brownells order)
* TangoDown Battlegrip (currently storing AA batteries)
* Magpul trigger guard
* Daniel Defense 12.0 free-float rail system
* TangoDown rail covers (X3, 1 has the tape-switch “pocket”)
* TangoDown Vertical Battlegrip (currently storing M3 batteries & not installed)
* Bushnell 52-0021 HOLOsight (about to become an EOTech 512.F)
* Ladder style rail covers (X3)
* Tac-Star 2000 Weapons Light system (SOON to be replaced with SureFire system)
* Phantom 5C2 flash hider (barrel had the be threaded 1st… ADCO did that for me)

http://img.photobucket.com/albums/v733/Michigun/AR/100_1670.jpg

[True Punisher]

Originally posted by Michigun

* Tac-Star 2000 Weapons Light system (SOON to be replaced with SureFire system)


The SureFire will look much better then the glossy light on there now :cool: You got a sweat set up there, I really like that long free float rail you got on there, and one last question if I may:

Hom much you got into it so far? ^c

[Michigun]

Originally posted by True Punisher
The SureFire will look much better then the glossy light on there now :cool:

That's what I was thinking as well, HOWEVER, the main reason the Tac-Star will be replaced with a SureFire is because that light belongs on my AK.

You know, they say that the Tac-Star is cheap &/or a POS, but before it went on my AK it was on a Remington 870 12-gauge... it withstood more then a 100 magnum powered shells! Sense that it's withstood SEVERAL hundred rounds installed on my AK.

Originally posted by True Punisher
You got a sweat set up there...

Thank you sir! ^c

Originally posted by True Punisher
...and one last question if I may:

Hom much you got into it so far? ^c

How much should it have cost me or how much do I have into it out-of-pocket?

Two different things entirely… ;f

[True Punisher]

Originally posted by Michigun

How much should it have cost me or how much do I have into it out-of-pocket?

Two different things entirely… ;f

I guess I was thinking, a little from column "A" and a little from column "B" ^7

So should it cost, and how much has it cost

;I

[Michigun]

"PM" on its way True Punisher!

[Estela216]

Here is my baby next to its bigger brother

[True Punisher]

Originally posted by Estela216
Here is my baby next to its bigger brother

Is that Scotch tape on the forearm of the bottem one? ;g

[Vincent Black]

Looks that way to me....;0

[ibontop]

here is my submission, but it is Pre-work, I plan on at the very least getting different barrel.

I see what you guys have been saying tho. These things just BEG for money to be spent on them

http://home.midsouth.rr.com/opiesan/newargrip.JPG

[okie]

Originally posted by CJan_NH
Here are a few of mine, a preban Colt 6601 HBAR with Loopy, Surefire forend and Harris bipod and a new Colt 6400C M4 carbine:

http://home.comcast.net/~cjan99999/Hbar_m4.JPG


Current pic of the 6400C with ACOG TA11D, M500A, and stakelocked Magpul M93:
http://home.comcast.net/~cjan99999/M4_Full6.JPG

RRA CAR build with ACOG TA11:
http://home.comcast.net/~cjan99999/Rra_acog1.JPG That is so sweet my friend;) :cool:

[Wicked96SS]

New AR... well, new to me...

http://guns.wicked96ss.com/pwa_ar-15/thumbs_d/mi_pwa_15_6_jpg.jpg
http://guns.wicked96ss.com/pwa_ar-15/thumbs_d/mi_pwa_10_6_jpg.jpg
http://guns.wicked96ss.com/pwa_ar-15/thumbs_d/mi_pwa_9_4_jpg.jpg

[MeatGrinder]

http://www.members.cox.net/slystrat2/ars3.jpg

[CPUFed]

Well, how does she look?

<img src="http://img.photobucket.com/albums/v505/cpufed/IMG_1062.jpg">

<img src="http://img.photobucket.com/albums/v505/cpufed/IMG_1061.jpg">

<img src="http://img.photobucket.com/albums/v505/cpufed/IMG_1058.jpg">

<img src="http://img.photobucket.com/albums/v505/cpufed/IMG_1057.jpg">

[F350]

Nothing overly fancy...but each one does it's job

http://img.photobucket.com/albums/v737/fordf350/ARs.jpg

[Perry F.]

Originally posted by CPUFed
Well, how does she look?

<img src="http://img.photobucket.com/albums/v505/cpufed/IMG_1062.jpg">

<img src="http://img.photobucket.com/albums/v505/cpufed/IMG_1061.jpg">

<img src="http://img.photobucket.com/albums/v505/cpufed/IMG_1058.jpg">

<img src="http://img.photobucket.com/albums/v505/cpufed/IMG_1057.jpg">

NICE!!

[JTR]

My little arf fam

http://photos.templarfirearms.com/albums/userpics/10001/normal_768x777.JPG (http://photos.templarfirearms.com/albums/userpics/10001/768x777.JPG)

[Perry F.]

Originally posted by JTR
My little arf fam

http://photos.templarfirearms.com/albums/userpics/10001/normal_768x777.JPG (http://photos.templarfirearms.com/albums/userpics/10001/768x777.JPG)

Very nice.

My farm only has one arf, I guess I need to buy another one so they breed.;f

[GUNZEALOT]

My new gun!

[glock_40_calibe]

My new homeland defense set

[Britt]

Originally posted by Perry F.
Very nice.

My farm only has one arf, I guess I need to buy another one so they breed.;f

I guess my M4 is a homo cause he has been in the safe a long time with a fine RRA AR and they haven't bred yet;)

[RMTactical]

Originally posted by Britt
I guess my M4 is a homo cause he has been in the safe a long time with a fine RRA AR and they haven't bred yet;)

Are they both RRA? Because they might just not want to inbreed?

[dewingrm]

Here's my AR. Nothing fancy but it gets the job done.

[wug44]

It is a Bushmaster XM15.
6pos. stock
single point sling
Houge grip
YHM FF railed hand gaurd
Tango down panels
Surfire G2 120 lumen
fobus mount
SOG vertical grip
M-9 bayonet
Phantom Flash hidder



http://img.photobucket.com/albums/v692/wug44/pic.jpg

[Perry F.]

Originally posted by GoreLicks
Are they both RRA? Because they might just not want to inbreed?

Lol, but if the RRA is built in Kentucky, it would not be a problem.;e

[Gary_P]

Originally posted by MeatGrinder
http://www.members.cox.net/slystrat2/ars3.jpg

I see we have the same tastes.

I picked up a Bushmaster 20" HB and an 11.5" with a 5" flashhider this past week..love the $h7t out of them


Gary

[Britt]

Originally posted by GoreLicks
Are they both RRA? Because they might just not want to inbreed?

Given that he is a "BUSHmaster", I expected a little bit more from him. :)

[SmartOne]

Originally posted by THOF
Heres my Bushmaster

;P Wow! Great camo job! ;)

[RMTactical]

Originally posted by Britt
Given that he is a "BUSHmaster", I expected a little bit more from him. :)

Ahhhhh!!! I see!

How old is he? Could it be that he needs some help...

[9x45]

just another hammer in the tool box...

[TheSniper]

Bushy and colt:

[strazz]

It has taken me about four months to build. The TA31 got here today:)

http://plaza.ufl.edu/strazz/A4.jpg

[getdown_glocker]

An update. I went from this....

http://www.interintense.com/hkusp45c/hkusp45c_and_m4a3.jpg

to this...

http://www.interintense.com/hkusp45c/m4a3_slung.jpg

this past week. I like it a lot. The EOTech is quite fun, and the ARMS #40 works well as a backup.

Here's what the EOTech reticle looks like on mine...

http://www.interintense.com/hkusp45c/m4a3_eotech_reticle.jpg

[ponykilr]

heres my RRA. gotta love it.:)

[Perry F.]

My Bushmaster M4/A3 with Aimpoint ML2
http://pstr-d02.ygpweb.aol.com/data/014/18/0B/78/60/8+3GdGZ2UPv+tjc9PTl5KkVSxaxTa-KC00A0.jpg
http://pstr-m01.ygpweb.aol.com/data/023/3F/45/D6/9A/mrs5Ambo6ztqLzRqfncau2Yfp0anLdk100A0.jpg

[arjohnson]

My newest build. Colt with ARMS 50M, Eotech 512, Vltor Clubfoot, ARMS 40 and a Betamag.2 Bushy M4's and 2 RRA lowers.;f

http://www.hunt101.com/img/260580.jpg

[mrcr0603]

http://www.hunt101.com/img/229861.jpg

http://www.hunt101.com/img/229862.jpg


Chris

[TheBelly]

here's mine. Bushmaster XM15 16" with removable carrying handle (rail underneath).

PS Sorry my pics blow.

[PDogSniper]

I'm kinda humbled by some of these pics...

Here's my Bush Bunny lining up on his Bushmaster. Pretty much standard A2 cept it has a full heavy chromed barrel and a bud installed a RRA two stage trigger. This trigger is so sweet. The gun is almost undeserving of it. It's better than the factory trigger in my RRA.

Below it is my RRA with chromed barrel...

http://www.imagestation.com/picture/sraid160/p55c593bc65477b569135c938879060b0/f4e7caf4.jpg

Here's a better pic...


http://www.imagestation.com/picture/sraid160/p31b65275435cc15f17c385ccce6c48ef/f4e7c148.jpg


This thread has to be a record for the longest running thread...:)

[Perrito]

http://www.imagestation.com/picture/sraid160/pedd1e97d40c034d24be395cbae32c8d7/f4e455ef.jpg

[dfowler21]

Just got it two days ago. Bushie 16" w 6 position telestock and Specter 3 pt sling.

http://img.photobucket.com/albums/v215/dfowler21/ARGlock2.jpg

http://img.photobucket.com/albums/v215/dfowler21/P3190051.jpg

[DesertShark1963]

http://www.nesop.com/pyphoto/images/20050321-009.jpg

[PDogSniper]

Originally posted by dfowler21
Just got it two days ago. Bushie 16" w 6 position telestock and Specter 3 pt sling.



df, nice backdrop, no discrace there...;?

[Bushw@cker]

Originally posted by DesertShark1963
http://www.nesop.com/pyphoto/images/20050321-009.jpg

Good looking gun. Too bad you can't put a FH on it. :steamed:

[Bushw@cker]

Originally posted by dfowler21
Just got it two days ago. Bushie 16" w 6 position telestock and Specter 3 pt sling.

http://img.photobucket.com/albums/v215/dfowler21/ARGlock2.jpg

http://img.photobucket.com/albums/v215/dfowler21/P3190051.jpg

Have the same rifle, except the A3 version. You will love it. ^c

[CJan_NH]

There have been some changes and new additions to the stable since I posted waaaaay back on page one:

From bottom to top Colt 6920, Colt 6400C, Colt/RRA w/6920 upper:

http://home.comcast.net/~cjan99999/M4s_Group1.JPG

From bottom to top Benelli M3s90, RRA CAR, Colt 6601:
http://home.comcast.net/~cjan99999/Surefires_3Gen.JPG

Here are 'Click' and 'Clack', my two identically configured test mules:
http://home.comcast.net/~cjan99999/M4_Click_Clack.JPG

Here is my newest, a Colt LE6721 dedicated anti-skunk carbine (optic borrowed from M4 above):
http://home.comcast.net/~cjan99999/Colt_Skunk1.JPG

http://home.comcast.net/~cjan99999/Colt_Skunk4.JPG

http://home.comcast.net/~cjan99999/Colt_Skunk6.JPG

[strazz]

http://plaza.ufl.edu/strazz/M4.jpg

[Mr. Science]

My favorite little bushy, put a decent Nevada camo job on it this winter.

[CJan_NH]

Originally posted by Mr. Science
My favorite little bushy, put a decent Nevada camo job on it this winter.
That looks AWESOME! ;P

Did you do it yourself, and if so would you consider being hired to do another one? What did you paint it with?

[dfowler21]

Originally posted by PDogSniper
df, nice backdrop, no discrace there...;?

Thanks, I was hesitant about using the flag, but it looks pretty patriotic to me as well.



Bushwacker,

Shot it yesterday, shot it a lot and loved every minute of it!

[RMTactical]

Here's a pic of a bunch of AR's. One is mine, four are my brothers, and the rest belong to some friends of ours.

http://i2.photobucket.com/albums/y18/mwirig79/HBAR-Stag004.jpg

and here's my newest one, not pictured in the before photo.

http://i2.photobucket.com/albums/y18/mwirig79/ACOGS035.jpg

[RMTactical]

here's a better pic of the camo'ed AR's, my brother did the camo job on them.

http://i2.photobucket.com/albums/y18/mwirig79/HBAR-Stag001.jpg

[Cclass]

Originally posted by CJan_NH
There have been some changes and new additions to the stable since I posted waaaaay back on page one:

From bottom to top Colt 6920, Colt 6400C, Colt/RRA w/6920 upper:

http://home.comcast.net/~cjan99999/M4s_Group1.JPG

What optic do you have on the caryy handle of your Colt 6920? I'd like a magnified optic plus the ability to use my irons. I think you've got a sweet looking setup there.

[CJan_NH]

Originally posted by Cclass
What optic do you have on the caryy handle of your Colt 6920? I'd like a magnified optic plus the ability to use my irons. I think you've got a sweet looking setup there.
Thanks for the kind words Cclass :)

That optic is a 2x20 compact ACOG, model number TA47-2. It's the little brother of the larger TA11D pictured right above it. So far I like it a lot. It has generous eye relief and by mounting on the carry handle you can transition to irons instantly. I've been experimenting with two different mounting methods-here's the other method with a LaRue rail mount:

http://home.comcast.net/~cjan99999/M4_3.JPG

At this point I'm leaning toward the simplicity of the carry handle mount. There are a lot of optics that don't work particularly well on a carry handle, but this little ACOG works great!

Here is the TA47-2 reticle:

http://trijicon.com/parts/426.jpg

[RMTactical]

I actually prefer the compact ACOG to the full size. I think the 2x magnification is perfect.

[DaleGribble]

Originally posted by Mr. Science
My favorite little bushy, put a decent Nevada camo job on it this winter.

I'm not really a fan of the AR or camo jobs in general, but after seeing that picture I just changed my mind about the camo jobs!

That rifle looks damn good! It's got me thinking about buying a poodle shooter and some paint!!!

^c ^c ^c

[neeko]

My toy.

http://plaza.ufl.edu/sellier/AR15.jpg

[CarlosDJackal]

Here's my baby. ;f

[Cclass]

Thanks for the info CJan_NH. My Bushy M4A3 is my first rifle (AR or otherwise) and I've been overwhelmed by all the optic choices that are available. I was leaning towards an ACOG but couldn't decide which one. I think that your setup will give me exactly what I'm looking for.

[tyler2you]

My simple little build:



http://users.adelphia.net/~tyler2you/m4 edited.JPG

[double_trouble]

Just finished my first AR Build.
LMT M4 Upper - 16" barrel
LMT Lower - SOPMOD 4 position stock
LaRue 7.0 handguard
SureFire G2 w/ LED Head & Fobus mount.
AimPoint ML2 w/ARMS #22M68
Hogue grip
ARMS #40 BUIS (waiting for the Big Brown Truck)
Flip up front sight (still shopping - any suggestions?)

http://img169.exs.cx/img169/9101/thelmt023ch.th.jpg (http://img169.exs.cx/my.php?loc=img169&image=thelmt023ch.jpg)

http://img158.exs.cx/img158/272/thelmt17larue3aj.th.jpg (http://img158.exs.cx/my.php?loc=img158&image=thelmt17larue3aj.jpg)

[Michigun]

Bushmaster A3 Dissipator:

http://img.photobucket.com/albums/v733/Michigun/A3/VLTOR/100_1790.jpg

http://img.photobucket.com/albums/v733/Michigun/A3/VLTOR/100_1789.jpg

http://img.photobucket.com/albums/v733/Michigun/A3/VLTOR/100_1799.jpg

http://img.photobucket.com/albums/v733/Michigun/A3/VLTOR/100_1802.jpg

(in order from stock to muzzle)

* VLTOR “Club Foot” collapsible stock assembly (currently storing six (6) M3 batteries & two (2) Aimpoint batteries)
* DPMS CAR/Sling Adapter
* Single-point MOUT sling w/H&K “snap hook” (actual sling not pictured)
* ACCU-Wedge (internal)
* TangoDown Battlegrip (currently storing two (2) M3 batteries & two (2) Aimpoint batteries)
* Magpul trigger guard
* Magpul (shown on magazine)
* WhiteOak Armament “T-Numbered” upper receiver w/Bushmaster parts kit
* CRANE O-Ring “extractor enhancer” (internal)
* LaRue BUIS
* LaRue Cantilever Aimpoint Mount w/Aimpoint extra battery compartment
* Aimpoint ML2 red-dot optic
* Daniel Defense 12.0 free-float rail system
* Original HBar Bushmaster barrel has been “lightweight” converted (under the DD)
* TangoDown rail covers (X3, 1 has the tape-switch “pocket”)
* Falcon Industries ladder style Rail Guards (covering all unused rail sections)
* TangoDown Vertical Battlegrip (currently storing M3 batteries & not attached)
* SureFire G2 w/Z32 shock isolated bezel & curly-wire tape switch)
* Phantom 5C2 flash hider/suppressor

[Xander27z]

;Q;P

[cajunboy2k]

http://i2.photobucket.com/albums/y33/cajunboy2k/Picture006.jpg[/IMG]

Mine

[Xander27z]

:) ;d

[DJ Niner]

Dude! This is the BLACK Rifle Club, not the Ghostly White rifle/pistol/knives club! ;)

Nice set-up; looks like you've got the bases covered...

[Dark_IT_Papa]

Well, since I'm beginning to get my Bushmaster configured as I want it, perhaps I also dare to post a pic in this forum...

Here's my Patrolman's Carbine - she's a reliable friend ;3

http://kore.botnia.com/gt/bushy.jpg

[Ramennoodlesoup]

RRA Entry Tactical. Attached is a T168 6x scope.

http://img.photobucket.com/albums/v508/Ramennoodlesoup/rrat168.jpg

[Xander27z]

Originally posted by DJ Niner
Dude! This is the BLACK Rifle Club, not the Ghostly White rifle/pistol/knives club! ;)

Nice set-up; looks like you've got the bases covered...

;z thnx, but that blanket was so damn ugly...i had to do something with that pic.... ;f

[PDogSniper]

Dark-it, I know it's been brought up here before but can you share your gun laws in your home country again...? What's it take to get a Bushy into your country for you to buy...?

[Dark_IT_Papa]

Originally posted by PDogSniper
Dark-it, I know it's been brought up here before but can you share your gun laws in your home country again...? What's it take to get a Bushy into your country for you to buy...?

Sure. It's quite simple really. First I have to get an import license and a buyers permit from the local police. Then I send the import licens together with a purchase order to a licensed firearms exporter in the US (I used www.weareguns.com).

The seller then applies for an export license from the state department. When it's been approved, he ships the rifle to Finland. When it arrives here, it's taken in by customs. So I have to go to customs and show my buyers permit and pay 3% import tax + 22% sales tax on the total value. And voilá, the Bushy is in my hands ;f

Finnish gunlaws states that minimum allowed lengt of a sporting rifle is 840 mm (it's possible to have shorter, but it needs another type of permit), so with the rubber buttpad the Patrolmans Carbine is 841 millimeter when telestock is folded.

And since there is no law agains suppressors in Finland, the next thing on my rifle will probably be a finnish BR Sound Suppressor :cool: -> http://guns.connect.fi/rs/

[jess33565]

My 6920 and 6721:

http://i2.photobucket.com/albums/y37/coltjester/DSCF0009.jpg

[OUSooner]

We need a btt;)

Heres an updated pic of my rifle with new Burris compact and Arms#2.

http://img.photobucket.com/albums/v481/OUSooner/743700dc.jpg

http://img.photobucket.com/albums/v481/OUSooner/3611c3c6.jpg

[Michigun]

My Bushmaster Dissipator modeling its new LaRue BattleLight:

http://img.photobucket.com/albums/v733/Michigun/A3/LaRue/LTBL1.jpg

http://img.photobucket.com/albums/v733/Michigun/A3/LaRue/LTBL2.jpg

http://img.photobucket.com/albums/v733/Michigun/A3/LaRue/LTBL3.jpg

.

[LBTRS]

Here are my two latest AR's. Both RRA Entry Tacticals chrome lined with quad rails.

http://users.lewiston.com/trautman/images/RRA/m4s.jpg

[kaizoku]

[...

[Delta-9]

Heres mine... The only thing I want to add to her at this point is a slingplate w/ single point sling.

<img src="http://img258.echo.cx/img258/8880/img38049mf.jpg">

[yugo308guy]

Here is my new complete LMT w/Daniel Defense rail, KAC rail panels w/grip tape, Aimpoint w/LaRue cantilever mount and LMt BUIS.
http://tinypic.com/4r6fwh
http://tinypic.com/4r6fyh
http://tinypic.com/4r6fs3

[SGT45]

My favorite!

http://www.imagehosting.us/himages/ihnp-328812.jpg

http://www.imagehosting.us/himages/ihnp-328830.jpg

[Novemberalpha47]

Here's my newest...built 9/04 just had to buy it.

[Novemberalpha47]

My first AR ever. Why not go all out????

[Njanear]

My first AR 'build', from a Del-Ton kit and STAG lower

http://216.77.188.54/coDataImages/p/Groups/230/230414/folders/170771/1529108M4No1.jpg

[82nd Airborne]

here's my new Rock River Elite car A4

[arjohnson]

Just picked up this NIB Colt 6721

http://www.hunt101.com/img/283281.JPG

[Yar]

http://madtrigger.com/images/Star%20AR%20001.jpg

[MeanMike]

here is mine, awaiting my aimpoint from the arfcom group buy

[Trumpet]

3 of my builds.

A2 is Mega lower, MOS upper, Stag LPK

A4gery is Ameetec lower, Colt RO901 upper, TA31F, KAC M5 RAS, Stag LPK, RRA buttstock, Troy Buis (not shown)
M4gery is Ameetec lower, LMT 14.5" w/Phantom fh, KAC RASII, VLTOR, Aimpoint M2, LaRue mount.

http://i3.photobucket.com/albums/y97/Trumpet1/IMG_0062.jpg
http://i3.photobucket.com/albums/y97/Trumpet1/IMG_0061.jpg
http://i3.photobucket.com/albums/y97/Trumpet1/IMG_0060.jpg
http://i3.photobucket.com/albums/y97/Trumpet1/IMG_0057.jpg
http://i3.photobucket.com/albums/y97/Trumpet1/IMG_0056.jpg
http://i3.photobucket.com/albums/y97/Trumpet1/IMG_0053.jpg
http://i3.photobucket.com/albums/y97/Trumpet1/IMG_0038.jpg
http://i3.photobucket.com/albums/y97/Trumpet1/IMG_0039.jpg


Rich

[Rigormootis]

My "SPR-ish" rifle:
click here (http://www.glocktalk.com/attachment.php?s=&postid=3595559)

My midlength:
click here (http://www.thehighroad.org/attachment.php?attachmentid=24715)

And when I finish my basic A2 uppered M4gry, i'll add pics of that too.

;c

[SomeGuyInAHat]

I finally got my red dot and back-up sight for my M4gery.

Here's the rundown:

Bushmaster XM-15
4-Position Collapsible Stock
14.5" M4 profile barrel w/ KKF A2FSMS flash suppressor
SureFire M500A-WH
EoTech 511.A65 Rev F
ARMS #40L Low-Profile back-up sight
Trijicon front sight
Side sling adapter
Wilderness 3-Point sling

http://members.cox.net/adc-junk/m4-511.jpg

[Sir Lancelot]

Rigormootis
Could you tell me more about your midlength AR?
I have been looking for a AR for a couple of months now and
that is the gun I want. What do you have in it?
Can you give me a list of parts?
I was going to have ADCO Firearms do the build.
Thank you.

[Rigormootis]

Your best bet is to go t AR15.com and run a search on the AR15 forum for "midlength". It will give you more info than I can share here. Basically, a midlength 16" barrel gives you more velocity than a 14.5, without a sig decrease in manuverability & you don't have to have a perm muzzle device to make it >16" (which you would need to do for a 14.5" ...unless you send in for your tax stamp)...but unlike a CAR-gas set-up 16", the gas pressure working the system is closer to that of a 20" (as the AR was designed around) than the high pressures generated in 16" with CAR gas. These high pressures have multiple downsides...but you can deal with them....or chose a midlength. Personally, I think we'll see many more midlength barrles soon. You can get the same barrel I used under the "specials" section at ADCO.

Here are my parts...I'll be over specific to leave little to your imgination. ;)

Lower
RRA old style logo “US Property” lower
CMT LPK w/ RRA 2-stage match trigger
Hogue pistol grip (OD green)
Magpul M93A-R stock w/ HK-style single point sling loop
CMT H2 CAR buffer & standard CAR spring
Troy Sling (OD green)
Upper
CMT A3 upper receiver w/ M4 cuts
AR15.com “Giffmann Special” group-buy midlength barrel (4150 steel, 1/7 twist, CL bore & chamber)
Smith Ent. Vortex FH
LaRue Tactical 9.0 FF forend w/ Magpul ladder rail protectors (OD green)
TangoDown forward vertical grip (OD green)
PRI Gas-buster CH
CMT bolt/carrier group
LaRue Tactical Aimpoint mount
Aimpoint M3 w/ 2MOA dot
Troy Gen2 rear BUIS

[Sir Lancelot]

Rigormootis - I have been looking at ar15.com for some time now.
I tried to register an account but they don't accept gmail accounts.
Thank you for the list I am printing the photo and list now, hope
you don't mind. Has your are been 100% out of the box? What kind of ammo do you shoot?
A friend sells ammo as a part time business and he can get me wolf cheap.
I know wolf sucks but it is cheap to shoot.

[Rigormootis]

I've not had it built up for very long, but I have fired 180rds of x855 (62gr.), 360rds of xm193 (55gr), and 30rds of Black Hills 75gr from it without a hitch. Truthfully, I have been building too many other rifles to shoot mine. ;g

I think you can still search AR15.com - even without an account - but if not, let me know and I'll help find you some direct links.
- C

[DJack]

Sold my 20" for this new girl!!

[Rosey]

Here's one of 'em:

http://img221.echo.cx/img221/9639/p1010036thumb8fd.jpg

[DreamWeaver88]

I just got my ARMS #40 BUIS from G&R Tactical. Here's an updated pic.

DW

http://pic17.picturetrail.com/VOL806/138216/250085/98027488.jpg
http://pic17.picturetrail.com/VOL806/138216/250085/98027366.jpg

[Manny78]

My very evil Armalite M15A4 5.56mm with 11.5" barrel, collapsible stock, reflex sight, Canadian Forces surplus mag, Atchisson .22LR conversion kit with 30 rounds mags.

http://img.photobucket.com/albums/v153/spouk777/000_0123.jpg

[StinkyMonkey]

Here is my RRA:

http://www.gunsnet.net/album/data//500/21009Untitled-311.jpg

[G21H30]

Pre Ban Colt-R-6601,Bushmaster DCM Lower/Dissipator Upper,LMT Lower/Bushmaster M-4 Upper, Barrett M-468 , Bushmaster DCM. The 3rd and 5th rifles belong to the wife.

[xring04]

here is mine, a Colt Match Target.
http://img.photobucket.com/albums/v609/xring04/evilblackrifle.jpg

[919]

http://i3.photobucket.com/albums/y61/919/AR-15004.jpg

[DJack]

my girl.. She is plain, but that is how I like it. I will add a houge grip, Phantom 5c2, and maybe a tac sling and rubber end on the stock, and that is it!

[leeinmemphis]

just picked these two up today:

http://img.photobucket.com/albums/v499/leeinmemphis/br1.jpg

http://img.photobucket.com/albums/v499/leeinmemphis/br4.jpg

[CPUFed]

The Bushmaster girls...

<img src="http://img.photobucket.com/albums/v505/cpufed/IMG_1900.jpg" alt="Image hosted by Photobucket.com">

<img src="http://img.photobucket.com/albums/v505/cpufed/ARs.jpg" alt="Image hosted by Photobucket.com">

[VA_Hoplophile]

Some current pics of the toys:
http://mywebpages.comcast.net/hoplophile/0605/Carbine.jpg
http://mywebpages.comcast.net/hoplophile/0605/Decimator.jpg
http://mywebpages.comcast.net/hoplophile/0605/Target_24.jpg

[hitman2565]

Here is my new "baby".
-Rock River
-24" stainless varmint barrel
-2 stage trigger
-Vltor stock
-Harris bipod
-set of quick detach rings
-Leupold VX-II 6-18x

[Multi-G]

The newest one. I shall call it the...........

The Ugly Stick

[demusn79]

zzzzzzzzzzzzzzzzzzzzz

[fomeister]

http://img.photobucket.com/albums/v698/fomeister/3gats.jpg

[cmb2874]

Got the group together, two of which are for sale in the EE.
http://www.spymac.com/upload/gallery/f_33/user_338722/upload_433331.jpg
Top to Bottom:
Cav Arms Custom Cammo Build, For Sale
KAC SR-15
Colt 6731
Colt H-Bar Build, For Sale

-CMB

[Mud]

http://img.photobucket.com/albums/v414/Bult4mud/DSC01102.jpg

just gotta add a BUIS and a SLING and its done

[Glockgirl26]

Originally posted by Multi-G
The newest one. I shall call it the...........

The Ugly Stick

Don't you mean "The Calico Carbine"?;)

[Mud]

[QUOTE]Originally posted by CJan_NH
[B]There have been some changes and new additions to the stable since I posted waaaaay back on page one:




From bottom to top Benelli M3s90, RRA CAR, Colt 6601:
http://home.comcast.net/~cjan99999/Surefires_3Gen.JPG



QUOTE]

any one know what light mount is on the middle carbine?


ALSO hey VA_Hoplophile which OPTIC is that???

[c4igrant]

Just built this one.


C4

http://www.gandrtactical.com/images/archive/Grant's%20weapons/Noveske%2016%20SPR.jpg

[Michigun]

Originally posted by c4igrant
Just built this one.


C4

http://www.gandrtactical.com/images/archive/Grant's%20weapons/Noveske%2016%20SPR.jpg

Okay, I give... where's the BUIS? ;f

(Maybe it's a LaRue BUIS stuck on the right side of that LaRue rail out of view? ;))

[Texas Gunman]

Newbie here, thought I'd post a few pixs, here is my Camo M4gery A1,2nd pix is my 20",have installed a Guv profile barrel since pix was taking.



http://www.hunt101.com/img/304256.JPG

http://www.hunt101.com/img/304259.JPG

Both sport the 1/7 twist.:cool:

TG

[Rigormootis]

Grant,
USO and LT... nice.
;c

*edit....yes, the TROY (http://www.thehighroad.org/attachment.php?attachmentid=24715) unit is very nice!!! ;f

[c4igrant]

Originally posted by Michigun
Okay, I give... where's the BUIS? ;f

(Maybe it's a LaRue BUIS stuck on the right side of that LaRue rail out of view? ;))

I am waiting for my TROY BUIS to come in. :)



C4

[Michigun]

Originally posted by c4igrant
I am waiting for my TROY BUIS to come in. :)



C4

^c

[UrbanGlock]

My new baby.
She took a long time, but worth it.

Special thanks to Josh!!!
UG

[aecasasus]

Here's mine....Hope you guys like it!!!

http://img174.imageshack.us/img174/3038/im0005394te.jpg (http://imageshack.us)

[pevrs114]

Here's my '04 16" Bushmaster Patrolman's Carbine, bought in September 2004! one of the first true production Ban Free rifles out there!


http://i7.photobucket.com/albums/y259/pevrs114/IMGP0684.jpg

http://i7.photobucket.com/albums/y259/pevrs114/IMGP0685.jpg

So far upgrades include:

Aimpoint Comp M2
ARMS #17 mount w/ spacer
KAC RAS
KAC railcovers
KAC foregrip
Surefire M95 Millenium Universal Weaponlight
Dermicil Weaponlight pressure pad mounting adhesive ;g
GG&G BUIS

Not shown:
GG&G endplate sling adapter
Phrobis III M9 bayo

Still to add:

14.5" chrome-lined gov't profile bbl w/ perm phantom
AN/PVS-14 equivalent $$$$
IR illum head for Surefire
Sling
Aimpoint KillFlash filter
Aimpoint double battery cylinder
Aimpoint rubber cover
Better pressure pad hold-down device

Any recommendations?

[dwestfall]

I know you can't really see it because the color totally camouflages it against the burbur carpet, but there is an AR in this picture. And a Glock!

http://contentproviders.com/images/zombies2.jpg

[dwestfall]

Originally posted by pevrs114
Still to add:

14.5" chrome-lined gov't profile bbl w/ perm phantom
AN/PVS-14 equivalent $$$$
IR illum head for Surefire
Sling
Aimpoint KillFlash filter
Aimpoint double battery cylinder
Aimpoint rubber cover
Better pressure pad hold-down device

Any recommendations? [/B]

Magpul enhanced triggerguard

[Michigun]

Good one dwestfall! ;f

Here's mine as she sets today:

http://img.photobucket.com/albums/v733/Michigun/LaRue/PP1a.jpg

[Wildpony]

http://www.hunt101.com/showphoto.php?photo=311356&size=big&password=&sort=1&thecat=

[StinkyMonkey]

My new KISS CAR15 lightweight.

http://www.gunsnet.net/album/data//500/21009Untitled-31.jpg

[CPUFed]

<img src="http://img.photobucket.com/albums/v505/cpufed/IMG_2376.jpg" alt="Image hosted by Photobucket.com">
<img src="http://img.photobucket.com/albums/v505/cpufed/IMG_2367.jpg" alt="Image hosted by Photobucket.com">

[50 cal]

http://www.hunt101.com/img/311870.JPG

[CarlosDJackal]

Here's my Frankenstein. It started life out as an Olympic Aarms (SGW) AR-15A1-1/2. The only component left from the original rifle is the lower receiver and bolt carrier group. The upper is an assembled Bushy flat top with lightweight 16-inch barrel.

[Hamsquatch]

Here’s our black rifles – two RRA tacticals with quad floating and stainless (1 in 8 turn), a RRA elite with surefire quad and stainless, and an SP1 made in ’67 w/original magazine:)

[Herdsman76]

Mine may not be as cool as the others but hopefully you'll like it.

Bushy M-4A2 Type Izzy Type Flash Hider
Surefire Quad Rail up front w/vertical foregrip.
Norgon Ambi Release
Tactical Charging Handle
Target Sports 4x30 scope
SPEC-OPS MAMBA Sling

[DJ Niner]

Looks like a fun and efficient set-up to me!

[cmb2874]

-KAC Stoner Match M4. Eo 552.F. Magpul Grip and Stock. KAC Flip Up. SOC Singlepoint.

-Colt 6731 Match Target Rifle. Eo 551.F. Surefire Modular Rail System. Suregrip. VLTOR Stock. Yankee Hill Flip Up. Wilderness Single Point.

[CJan_NH]

Originally posted by Mud
[B][QUOTE]Originally posted by CJan_NH
[B]There have been some changes and new additions to the stable since I posted waaaaay back on page one:




From bottom to top Benelli M3s90, RRA CAR, Colt 6601:
http://home.comcast.net/~cjan99999/Surefires_3Gen.JPG



QUOTE]

any one know what light mount is on the middle carbine?


That's a front sight rail from RBPrecision:

http://www.rbprecision.com/5f0c8af0.png

Available HERE (http://www.rbprecision.com/id14.htm) (just scroll down that page a bit :))

[Yojimbo]

Here's some new pics...;f

http://www.huntingpictures.net/data/560/95P7310042_Large_.JPG

The mid-length in black.
http://www.huntingpictures.net/data/560/95P8070035_Large_.JPG

[dbrowne1]

My latest creation:

-Colt LE6520 (16" lightweight barrel)
-Colt M4 upper receiver swapped in
-LaRue 7.0 Foreend
-GG&G "Agency" sling mount and single point sling (Specter? CQB Solutions? I can't remember - it's just a piece of nylon)
-Aimpoint ML2 and LaRue mount
-Troy rear BUIS
-LaRue Battlelight
-TangoDown VFG
-Badger Ordinance charging handle latch

http://home.comcast.net/~dbrowne1978/guns/AR_001.jpg
http://home.comcast.net/~dbrowne1978/guns/AR_002.jpg

Ugly alien toes shown in pic not included

[Michigun]

Felt like working on my photo editing a bit today... hope ya don't mind dbrowne1:



http://img.photobucket.com/albums/v733/Michigun/ARFix.jpg



.

[Mud]

Jimbo i have always had a crush on your rifle(s)

nice setups
also good choice on the HELLCAT

Michigun is that a replacement for the dissy or a addition?

[Michigun]

Originally posted by Mud
Michigun is that a replacement for the dissy or a addition?

Nah, that's dbrowne1's AR... was just messing around with his pictures was all. ^c

(FYI, my Dissy tain’t go’in no where! ;f)

[Mud]

i thought it looked ODDLY familiar

[dbrowne1]

Originally posted by Michigun
Nah, that's dbrowne1's AR... was just messing around with his pictures was all. ^c


You removed my alien hybrid toes! How dare you! Don't you know I need those to hang from the ceiling when I sleep!

[AggiePhil]

Drbrowne, scary toes. ;P

Michigun, keep working on those Paintshop Pro skills. ;) ;e

[DaleGribble]

Originally posted by Yojimbo
Here's some new pics...;f
http://www.huntingpictures.net/data/560/95P8070035_Large_.JPG

SWEET!

Where did you get the chest harness/mag carrier and does it fit AK mags?

[Ford302Glock21]

I'm the baby!
http://www.corral.net/photopost/data/500/medium/Nothemomma.JPG

[DJ Niner]

Gotta love me!

I guess that makes you "not-the-Mama"? ;f


(Loved that show)

[Yojimbo]

DaleGribble,

The chest harness is a SOTech Hellcat Mk2 and I couldn't tell you for sure if AK mags would fit in them. You may want to check on the Lihtfighter forums to see if anyone hase used one with AK mags.

BTW, I got it new for a very good deal on the Lightfighter High End Swap Meet forum. ;)

[Opie]

http://i22.photobucket.com/albums/b307/Opie-IN/DSC00401.jpg

One with a few options and one plain-jane.

[myglockisa23]

http://i6.photobucket.com/albums/y212/dwaine/P8150148.jpg
http://i6.photobucket.com/albums/y212/dwaine/P8150152.jpg

[Ford302Glock21]

Hey myglock...are the A2 handle + scope setups worth doing? I'm looking at doing a cowitness A2 setup possibly and I'm still curious if the scope above handle thing is at all worth doing. I've seen one that looks just like that on tactical shack.

[myglockisa23]

the one on the top (Bushmaster) is an original Colt 3X scope cost $180.. The one on the bottom rifle (Colt) is a copy.... cost $30 on Ebay

I'm considering a Aimpoint....

[Razoreye]

Originally posted by Ford302Glock21
I'm the baby!
Holy **** dude, I have that same doll locked away somewhere. My parents got it long ago and thought it might be collectible one day. Does it have the draw string thingy in back? Haha, never thought I'd see one of those again. Nice gun, btw.

[armedcitizen]

http://www.parkcitiestactical.com/album/00001552/Background.jpg

Bushie M4gery, A3

[AggiePhil]

ArmedCitizen,

Is that the regular flash hider that Bushmaster has on their M4/A3? I thought they had one that looked more like the real one.

[Herdsman76]

AggiePhil,

I have the same model as ArmedCitizen with the A2 carry handle (fixed) and the flashhider is the Izzy Type from Bushmaster. Bushmaster does have the bridcage hiders as well but the Izzy is the one I've noticed more on their rifles lately.

I'm sure the birdcage can be mounted without any trouble.

H76

[AggiePhil]

Thanks Herdsman. Do you know what IZZY means? Sounds a little squirrelly...

[Ford302Glock21]

Yea its the pull string talking one. I'm gonna bite you now! :) My uncle had bought it and gave it to me a while back when he was moving. He also gave me an ALF doll about the same size that talks when you squeeze his stomach only hes battery powered and uses aw funky contraption with a motor and rubber band that doesnt work too great so usually he talksssssss realllllll slowwwwwwwwwwwwwww

[Ridgeway]

http://www.jdbeyer.com/gunpics/ars1.jpg
http://www.jdbeyer.com/gunpics/ars2.jpg

Top: Bushmaster XM15-E2S; 5.56mm
Bottom: Rock River Arms upper & Stag Arms lower; 9mm

[Alaskapopo]

Here is my Colt.
Pat

[Alaskapopo]

Here is my AR10
Pat

[Alaskapopo]

Sorry my colt pic got cut off
Pat

[rob99rt]

Norrel's moly resin flat gray basecoat with black Rustoleum for the pattern. If I don't like the black someday, I can spray it off with carb cleaner and start over.

http://www.ps127.com/Bushmaster/step3/camo-bushmaster-2.jpg

[edpmedic]

355sigfan
How do you like the Badger Stabilizer Handguard? I am thinking of getting one for one of my AR10's and also a AR15. Problem is for the AR10 I wanted it in green.

[Alaskapopo]

Originally posted by edpmedic
355sigfan
How do you like the Badger Stabilizer Handguard? I am thinking of getting one for one of my AR10's and also a AR15. Problem is for the AR10 I wanted it in green.

I like it its nice. Its drilled and tapped all over it if you want to add additional rails.
Pat

[edpmedic]

Thanks. I was afraid it would be unstable the way it is secured to the barrel nut.

[myglockisa23]

Traded for this tonight....EOTECH tomorrow... which one do I buy and what revision?



http://i6.photobucket.com/albums/y212/dwaine/RRA.jpg

[Mud]

i like the 512 uses aa batts
not water proof or NV but if you need that go 552

[CPUFed]

<img src="http://img.photobucket.com/albums/v505/cpufed/IMG_2429.jpg" alt="Image hosted by Photobucket.com">

[RMTactical]

SWEET HONEY LICKIN' NECTAR, BATMAN! ;f

[Michigun]

Originally posted by rob99rt
Norrel's moly resin flat gray basecoat with black Rustoleum for the pattern. If I don't like the black someday, I can spray it off with carb cleaner and start over.

http://www.ps127.com/Bushmaster/step3/camo-bushmaster-2.jpg

SWEET!

I really want to do that kind of a pattern on my all-black-currently waterfowl shotgun… thinking tan for the base coat with big black stripes/blotches like yours, maybe just a hair bit of green tossed in here & there… I want to keep it simple.

[SKeefe]

http://home.sc.rr.com/scottk/Gun/m4a304small.jpg

[Michigun]

Just Irons...



http://img.photobucket.com/albums/v733/Michigun/A3/IRON/CopyofIMG_0122.jpg



http://img.photobucket.com/albums/v733/Michigun/A3/IRON/CopyofIMG_0126.jpg



Can't forget the white light...



http://img.photobucket.com/albums/v733/Michigun/A3/IRON/CopyofIMG_0128.jpg



.

[demusn79]

Michigun
is that a beamshot?
the rail looks real lonely w/o the light.

[AggiePhil]

That's a LaRue Tactical light.

[Michigun]

Originally posted by demusn79
Michigun
is that a beamshot?
the rail looks real lonely w/o the light.

AggiePhil has it right. ^c

[ProfMoriarty]

Bushy:

http://pic16.picturetrail.com/VOL670/2623856/5228821/110985521.jpg

Colt:

http://pic16.picturetrail.com/VOL670/2623856/5228821/66910295.jpg

[GregG17]

heres my new baby, just got her today!!!

[hokieglock]

yea baby, it's great to be an american!

[hokieglock]

prof, what's that rear sight you have on that bushy?

[hokieglock]

Originally posted by CPUFed
<img src="http://img.photobucket.com/albums/v505/cpufed/IMG_2429.jpg" alt="Image hosted by Photobucket.com">

ok, instant wood!!!!!!!!!!!!!!!!!!!!!!!;f ;f ;f

[ProfMoriarty]

Originally posted by hokieglock
prof, what's that rear sight you have on that bushy?

That's the Bushy A2 sight ass'y detachable carry hande that I cut down and refinished.

In order to engage the picatinney rail, the aftermarket sights need to be positioned too far forward for me.

The cutdown retains the original sight position.

[hokieglock]

prof, a beautiful job.

[ProfMoriarty]

Originally posted by hokieglock
prof, a beautiful job.

Thanks!:)

[TxSharpShooter]

My Olympic Arms PCR-5. I added the CAR stock and green furniture. It shoots really well, and likes the UMC 55 Grain the best.

http://img.photobucket.com/albums/v321/dkurb03/DSC_0006.jpg

[G36.45]

http://img155.imageshack.us/img155/708/post8sf.jpg

[hokieglock]

Originally posted by G36.45
http://img155.imageshack.us/img155/708/post8sf.jpg

an ar with some bling bling. schweeeeeeeeeeeeet

[Alaskapopo]

I made some changes to my gun. Got ride of the big light and went with a a rail system. Well here is the pic.
Pat

[kepm123]

Hey CPUfed,

Is that a RRA Gov Model. Looks like the same setup as one. I am interested in getting one of those.

If it is let me know what you think of it.

[hotrodtba]

Bushy Carbon 15 M4

http://img.photobucket.com/albums/v734/hotrodtba/Guns/M4.jpg

[CPUFed]

Originally posted by kepm123
Hey CPUfed,

Is that a RRA Gov Model. Looks like the same setup as one. I am interested in getting one of those.

If it is let me know what you think of it.

If you are talking about the one on the right with the Eotech, it's a Bushmaster M4A3. The second one on the left is an RRA post-ban carbine, not sure of the model though. The whole line of guns pictured are (L-R): Bushmaster, RRA, Eagle Arms, Bushmaster(mine), Colt and Bushmaster(also mine). The one in the front is a Galil (not mine).

[Riverweasel]

http://i10.photobucket.com/albums/a107/G22/DCP_0216_1.jpg

24" SS BBL (Model 1 sales) and RRA lower with NM triger, Harris bi-pod, Leupold 3x9x40 Mark4 glass. The only thing I had to do is stake down the gas tube after learning that they are not staked down at the factory.
Yote killer!!

http://i10.photobucket.com/albums/a107/G22/100_0610_1.jpg

RRA Entry Tactical, Tacpoint red dot, YHM 2pc quad rail with Tango Down rail covers and TD vertical grip.

[TxSharpShooter]

Riverweasel...how do you like the Model 1 Sales upper? It looks pretty nice...I have been thinking about buying the 20 inch upper just like that for my carbine pictured above. Nice looking rifles...thanks!:cool:

[USMCsilver]

http://webpages.charter.net/usmcsilver/images/green_machines.jpg

[Riverweasel]

Originally posted by TxSharpShooter
Riverweasel...how do you like the Model 1 Sales upper? It looks pretty nice...I have been thinking about buying the 20 inch upper just like that for my carbine pictured above. Nice looking rifles...thanks!:cool:

I have only one complaint, they don't stake the gas tube after attaching it to the carrier. I took a carbine class and another guy with a model 1 sales AR had his gas tube come loose and he was out of commission for a while. The instructor noticed that it was not staked down. This was after a few hundred rapid fire rounds. So I fixed mine and I have no complaints. I don't rapid fire that one anyways, I use it more as a one shot one kill Yote sniper rifle! It's super accurate and a lot of fun to shoot. Also the price was right ($465) and they ship it to your door. Some people don't like them, I've never had any problems with mine, including the gas tube before I staked it.

[demusn79]

~`c MODEL 1 SALES IS GOOD TO ME!

[Hokie2000]

I've made some small changes to the AR, so I figured I would update my pics.

Before:
http://i3.photobucket.com/albums/y80/Hokie2000/Img_0118.jpg


After:
http://i3.photobucket.com/albums/y80/Hokie2000/Img_0336.jpg

http://i3.photobucket.com/albums/y80/Hokie2000/Img_0335.jpg

[Perry F.]

Here's the 16" Bushy M4/A3

ACOG TA11D
Hogue Grip
Yankee Hill 2 piece forend
Yankee Hill backup site
CDN vertical grip


http://img265.imageshack.us/img265/192/10092825mc.th.jpg (http://img265.imageshack.us/my.php?image=10092825mc.jpg)

[nolajkl]

Take a look

[nolajkl]

Another look

[nolajkl]

A friend who opens doors.

[Razoreye]

Originally posted by nolajkl
A friend who opens doors.
I smell a ninja!!
;f ;a ;f

Very nice equipment.

[Blah!]

blah!

[fireslayer23]

http://www.hunt101.com/img/306088.jpg

JP Enterprises CTR-02 with TPS rings and 8.5-25X50 Leupy VXIII LRT

http://www.hunt101.com/img/335956.jpg

Stoner M5 with Trijicon Reflex

http://www.hunt101.com/img/335964.jpg

RRA Entry Tactical with Troy Industries dual ap folding rear sight (No optics yet, I just bought a house)

[strazz]

http://plaza.ufl.edu/strazz/guns/ARs.jpg

[ecgRN]

Me and mines.....

http://tinypic.com/fdy4pd.jpg

[Blah!]

http://intenseghetto.com/%7EGutwrench/M4gery1.jpg

[Razoreye]

ecgRN

That pic made my day, haha the expression on your face is priceless.
Cheers. ;c

[GlockHunter]

http://tinypic.com/fco5cl.jpg
http://tinypic.com/f57k8g.jpg

[G19Tony]

Black and Tan AR's

http://i20.photobucket.com/albums/b226/G19Tony/Tanar1.jpg


Bushmaster Carbon 15
- EOTech 551 I don't need NV, but DPMS was having a sale!
- GG&G Accucam for the EOTech.
- PT Tritium night sights, front and rear.

http://i20.photobucket.com/albums/b226/G19Tony/Blackar1.jpg

Bushmaster XM15E2S
- Replaced Clinton barrel with 16" M4gery barrel.
- PT Tritium night sights, front and rear.
- NC Star 4X30 illuminated reticle scope.
- Magpul cool looking trigger guard thingy.

;f

[CPUFed]

http://img.photobucket.com/albums/v505/cpufed/IMG_2676.jpg
http://img.photobucket.com/albums/v505/cpufed/IMG_2681.jpg

[GregG17]

CPUfed which site do you like better you EOtech or AIMPOINT???

[CPUFed]

Originally posted by GregG17
CPUfed which site do you like better you EOtech or AIMPOINT???

I prefer the Eotech, but the Aimpoint is an excellent sight. The AR with the Aimpoint is actually used by my son more than me. That's why the light is on the left, he's a south paw...

[battlin bulldog]

dpms panther arms

[GregG17]

With my new TROY freefloat....

[TxSharpShooter]

G19Tony - How does the Bushy XM15 shoot with the carry handle mount?

[GregG17]

Another update with me CQD vert grip...