What holster do you carry your M-Series in?

[mcgarr]

I use the High Noon Slide Guard (http://www.highnoonholsters.com/Product_Line/_Slide_Guard/_slide_guard.html) for a belt holster. I'm not terrible impressed with this holster. I feel the leather is too soft and it isn't a pancake holster. The leather being soft allows the gun to flop around a too much for me to conceal carry with and be comfortable.

I have purchased a YCS IWB on Outdoorbidur.com. Report to follow.

Blade-Tech has a nice selection as well and looks to be a future order in a month or so. I am leaning towards the UCH (http://www.blade-tech.com/frontend?command=ProductMatrix&iProductId=3043) and/or the Belt Holster (http://www.blade-tech.com/frontend?command=ProductMatrix&iProductId=4682&iSectionId=4364). Anybody using either one of these?

What other holster makers have a Steyr product and what do you think about the holster.

[RatFink]

I got a Fist Basic for my S40, very nice guys, very good product.

http://www.goobage.com/pics/Temp/fist40.gif


Best to order through gunnersalley.com.

[s12coolguy]

http://www.usasteyr.com/images/194-10-0002-E.jpg

This is a leather holster from http://www.usasteyr.com/pistolaccessories.htm Looks quality! I might give it a whirl....

[SturmRuger]

I bought a Bianchi minimalist 105. It is a great little OWB holster that was really tight at first, but with time it loosened up considerably.

[Flashpoint]

http://img.villagephotos.com/p/2003-4/148376/jitslid.JPG
Done Hume JIT made for a p239
can't complain for $20

http://img.villagephotos.com/p/2003-4/148376/MLMBU[KNXSQEMQXIDLJP-Steyr%20Cult.JPG

HIghnoon Hidden Ally
Works well but I wish the clip was a little less obvious

[mordis]

Sorry for making a hijack attempt on your thread but I've been looking for a decent draw-holster for my M9 and it seems they are very hard to find. So.. could anyone point me where to look for a M9 made draw- or "tactical" holsters?

What I had in mind:
http://www.vegaholster.it/db/p_scheda.asp?ID=72&lan=eng
One guy at our club carries Glock in a holster like this, too bad Steyr is too wide to fit into it..

[mcgarr]

What I had in mind:
http://www.vegaholster.it/db/p_scheda.asp?ID=72&lan=eng
One guy at our club carries Glock in a holster like this, too bad Steyr is too wide to fit into it.. [/B]


Try one for a USP. They are close in the width department.

[Flashpoint]

I was going to suggest trying one for a XD, I tryed a leather pancake made for the XD and it fit well.

[Akkid]

Ratfink, do you have any more pics of your S40; havent seen a two tone Steyr yet.

[Zundfolge]

www.highnoonholsters.com

they make lots of nice holsters for Steyrs

I had a "Tailgunner w/clip" and it was a nice IWB holster.


A couple years ago I had a pancake holster made for my M40 by Mark Waldon of Waldon Holsters (no longer in business).

I recently converted it to an IWB and thats what I carry in now.

[mcgarr]

Originally posted by s12coolguy
http://www.usasteyr.com/images/194-10-0002-E.jpg

This is a leather holster from http://www.usasteyr.com/pistolaccessories.htm Looks quality! I might give it a whirl....

It looks good, but I called them and they don't carry left handed ones...... Thanks for the heads up.

[Akkid]

Theres a thread over on the Falfiles about steyrs and what holsters to use. There contact info for a few companies that make them, even for leftys.

[RatFink]

Originally posted by Akkid
Ratfink, do you have any more pics of your S40; havent seen a two tone Steyr yet.

Sorry, but this is the only other pic I have at the moment.

http://www.goobage.com/pics/gunporn.jpg

[s12coolguy]

Originally posted by mcgarr
It looks good, but I called them and they don't carry left handed ones...... Thanks for the heads up.

Dang it! thank YOU for the heads up... I'm a lefy too

[SELFDEFENSE]

The only G19 OWB holster I could get to fit the wider M9 was my leather Bianchi Minimalist (after burnishing the slide edges from working the tight-fitting M9).
I am still holding the shooting trials on the M9 vs. the G19. If the M9 replaces the G19 as BUG, then I will have to find an IWB (I could not make the M9 fit the Sparks Mini Max and did not want to force it).

[Ascaris]

When I get my M-series (still don't have the money), I intend to go to Predator holsters in Mesa, AZ (right near Glockmeister) and have him make an IWB (Kydex) for me. I like the Predator IWB for my G19, FWIW. Predator can make one for any gun you bring him in about an hour. Can't beat that!

Frank

[freight dog]

I highly reccommend www.haugenhandgunleather.com (http://www.haugenhandgunleather.com) I just recieved a Model 6 "Executive" for my SA-XD sub with the optional thumb break (no extra charge) in dark brown. It is gorgeous and the gun fits perfectly with no break in needed. $64.95 plus $6.00 shipping and handling. They list the Steyr M9 and M40 in models available. I will be ordering one for my M9. Sorry, no camera for pics.

[Zundfolge]

I've probably mentioned this a handfull of times, but for you guys with S40s and S9s, Any holster made for an M will work with your S.

The controls line up to the same places in the holster, only difference is length of slide and length of grip (so you'll have about a half inch of air at the muzzle end).

[4eyes]

Originally posted by mordis
Sorry for making a hijack attempt on your thread but I've been looking for a decent draw-holster for my M9 and it seems they are very hard to find. So.. could anyone point me where to look for a M9 made draw- or "tactical" holsters?


Uncle Mike's G21/30 holster spread with longer rubber tubing and longer screws works fine as an inexpensive "games holster". It looks close enough to stock that I haven't had a problem with IDPA SOs.

(A foot of auto parts half inch OD neoprene gas line and a few inch long hardware screws will put the "queeks draws" on several Uncle Mike's holsters).

[B27]

Bladetech straight drop belt scabbard-

http://www.fototime.com/FC7EF6958F3CDB7/standard.jpg

[SturmRuger]

B27 I am curious to know what model your Bladetech holster was originally made for. I am been looking for a good kydex holster for my M40 for some time now. I can't seem to find Steyr holsters listed on their website so I am assuming it was for a differant gun. Thanks

[B27]

SR-
Just scroll through the list looking for Steyr.
They are not really in strict alphabetical order.:)
Right after the HK's.

http://www.blade-tech.com/frontend?command=ProductMatrix&iProductId=4682&iSectionId=4364