PDA

View Full Version : improved P7 scraper tool

FLIPPER 348
10-11-2004, 17:14
Last year or so I noticed that I had a scraper in my P7M8 box. The scraper had been in there for 6 months! Being black it did not notice it as this was the first P7 I'd ever owned with the box and all the goodies. I came up with an idea for a scraper tool that also would be a screwdriver for the grip screws and have a 1/2" flat to remove the firing pin bushing. I made the combo-tool out of soft stainless so it would be easier to see. having acess to a laser cutting unit made the job duck soup and I've sold quite a few online. If any of you are intrested in one of these.............. there are ordering details over on the Cult of the P7 board.



the picture is down a-ways showing the factory version and mine
MarcDW
10-12-2004, 05:18
How is the firing pin bushing removed. I have never figured that out!
FLIPPER 348
10-12-2004, 07:54
with your left hand hold the P7 and slightly engage the grip saftey, insert your thumbnail (or my nifty tool) into the bushing slot, depress slightly and rotate 45 degreees............out she comes along with the firing pin. it is a good idea to check the bushing as they crack. Once cracked they can lead to un repairable slide damage (trust me)
MarcDW
10-12-2004, 08:05
Thx, now I got it out!
Catbird
10-12-2004, 08:17
My OEM scraper tool is great for blowing bubbles. If you could put a hole in yours where the "P7" is stamped, I'd be interested.
(just teasin') :)
FLIPPER 348
10-12-2004, 23:08
It's not stamped, it's cut through with the same laser that cuts the profile.........................so it blows P7 shaped bubbles!
FLIPPER 348
10-17-2004, 12:47
I will be selling them on eBay in two weeks or so and the price will be going up.
Old Tom
10-18-2004, 21:11
A brass .270 cal. rifle cleaning brush fits the gas chamber on my H&K P7M8. It does a good job. :)
FortyCaliber
10-18-2004, 21:59
Is there a scraper somewhere in that picture? ;Q

I have several of your scrapers and they work great. Much better than the .270 bore brush even. ;)
FLIPPER 348
10-18-2004, 23:01
oops.......wrong piucture! GOD what a moron I am



here is is
Catbird
10-19-2004, 07:11
I would like to purchase one of your scraper tools for my P7M8 as a spare. For the record, could you please post here your price and payment instructions? Thanks.
FLIPPER 348
10-19-2004, 08:03
Ordering instructions are over on the Cult discussion board.
Catbird
10-19-2004, 08:15
Yes, I saw the info there. Because that thread is several months old, I simply wanted verification that everything was still the same. For better or for worse, my nature causes me to dislike assumptions. Moreover, you may realize more sales if you restated that data here on GlockTalk.
FLIPPER 348
10-19-2004, 23:16
Thanks for the advice but I don't want to post the ordering info here as is it might violate some rule or other...............i just wanted to post the info and let the P7 folks do as they may. They are a pretty good crowd, let me tell you! I've taken over 50 personal checks from orders on the Cult board and all of them have been good!!
FLIPPER 348
10-24-2004, 09:33
shipping out 11 today!