G35 aftermarket barrel [Archive] - Glock Talk

PDA

View Full Version : G35 aftermarket barrel


atmarcella
11-24-2004, 09:07
bogs where do you think can i buy a g35 aftermarket barrel? thanks in advance:)

Saruman
11-24-2004, 09:47
what for? if you plan to shoot a lot of lead and compete without cleaning your after every match/session, ok lang siguro.. but if it's for occasional plinking, matagal mo mababawi ang price nya.. just shoot the living daylight out of the stock bbl and clean after each session.. although medyo pogi points na nagpapalit ka ng barrel bago pumutok.. naks!:) :)

mc_oliver
11-24-2004, 17:55
[threaddrift]
Saruman, di ba g35 gamit mo dati? Sa box compliant na mag setup, ilang rounds napag-kasya mo at ano klase'ng basepads?

Saruman
11-24-2004, 22:36
Originally posted by mc_oliver
[threaddrift]
Saruman, di ba g35 gamit mo dati? Sa box compliant na mag setup, ilang rounds napag-kasya mo at ano klase'ng basepads?

yung +2 pads na may locking pin ang ginamit ko and the aredondo.. reliable cap is 17.. 18 kasya pero pahirapan and sometimes fails to feed..

mc_oliver
11-24-2004, 22:46
Okay thanks. :)

atmarcella
11-24-2004, 23:36
saruman, takot ako sa KB, if i have an aftermarket barrel i can use the cases as long as wala pa crack, currently i have a g22, di ba notorious yon sa KB, i plan to convert it to g35, next on the list after the barrel is a g35 slide

cebuboy
11-25-2004, 04:55
hi atmarcella,

in my experience, the newer(Gxx series) .40sw glocks have good chamber support. a friend of mine has been shooting reloads out of his g23c for some time now without any problems, he just cleans the barrel after about 200 rounds. unlike my experience with the g21, which leaves the the brass with the glock smile:) even have a case failure which blew out the mag(thankfull that i got away with it). solved the problem by using an aftermarket barrel with better support, now i can reload till the necks split:) btw, never had problems with the polygonal rifling of the barrel, just clean the barrel after shooting. i think the problem is in the chamber area which is a bit oversized for reliability in a military pistol designed to fire military ammo. and one more thing, never had problem with the g21 using military(r.p.a) brass(no glock smile even with major loads).

atmarcella
11-25-2004, 06:36
thanks cebuboy! actually i have been using reloads with teflon heads/bullets, i bought once fired cases and i have reloaded them twice already, i've participated in 2 level 1's and 2 level 2's with the these brass, medyo natatakot lang ako cos as i surf the net i read more and more abouts kb's especially the bigger caliber glocks, .40 above, that's why i've decided to get an aftermarket barrel, parang sabi ko sa sarili ko i'm pushing my luck na, di kaya? sayang kasi ang baril kung mag kb, kung sa states balik lang nila sa glock USA papalitan yon ng bago, dito sa atin sorry ka na lang, anyway pare tnx for the info :)

cebuboy
11-25-2004, 07:05
no prob, just remember to check your brass for bulges(glock smile). if the brass looks ok(no bulge in the 6:00 position) youre good to go:) i kind of ignored that and relied on my luck, kaya na sabugan. luckily no damage to gun and shooter, the mag did not look so good after that. but hey, it still works fine:) stay safe.

bagito
11-29-2004, 09:39
cal 40 kaboom.
pics from sw40 forum. be safe

http://img111.exs.cx/img111/7528/glockkaboomphoto008.jpg

batangueno
11-29-2004, 19:03
I'm sure a different gun if fired with the same overloaded/defective cartridge that destroyed that glock will meet the same fate.

gunfool
11-29-2004, 21:06
Originally posted by bagito
cal 40 kaboom.
pics from sw40 forum. be safe

http://img111.exs.cx/img111/7528/glockkaboomphoto008.jpg Putsa nakakatakot naman 'to! Wala pa man yung G17 ko from Deenoh medyo kinakabahan na ako.;P

JuDGe
11-29-2004, 21:26
Originally posted by batangueno
I'm sure a different gun if fired with the same overloaded/defective cartridge that destroyed that glock will meet the same fate.

Right you are!

A horrendous catastrophic failure in a polymer pistol! Not only is it not a Glock, but it's got a fully supported chamber, to boot!

Taken from the Gun Zone Website:

http://img.photobucket.com/albums/v122/gaston770/usp45-r.jpg

http://img.photobucket.com/albums/v122/gaston770/usp45-l.jpg

atmarcella
11-30-2004, 00:08
bagito check this out:

http://dfuse.us/glockKB.html

bagito
11-30-2004, 04:27
Originally posted by atmarcella
bagito check this out:

http://dfuse.us/glockKB.html

thanks for the info.

bogs,
where in QC can a get reliable teflon coated or FMJ reloads?

darwin25
11-30-2004, 21:56
Originally posted by atmarcella
saruman, takot ako sa KB, if i have an aftermarket barrel i can use the cases as long as wala pa crack, currently i have a g22, di ba notorious yon sa KB, i plan to convert it to g35, next on the list after the barrel is a g35 slide

Sir kung KB ang ikinakatakot mo. Then most probably if you have one(god forbid), pati slide and frame mo di mo pakikinabangan. Just get another gun na pambugbugan.

gunfool
11-30-2004, 22:02
That's what I had in mind. I'd rather buy a CZ or an Armscor 40 na pambarug. Pang japorms na lang yung G17.

batangueno
12-01-2004, 00:42
Originally posted by bagito
thanks for the info.

bogs,
where in QC can a get reliable teflon coated or FMJ reloads? Get the teflon heads from First Option or FMJ heads from Armscor then have them reloaded from Stronghand or True Weight.

gunfool
12-01-2004, 01:20
Originally posted by batangueno
Get the teflon heads from First Option or FMJ heads from Armscor then have them reloaded from Stronghand or True Weight. All in all, how much will it cost me on the FMJ heads + reloading charge?

9MX
12-01-2004, 01:42
Originally posted by gunfool
All in all, how much will it cost me on the FMJ heads + reloading charge?

Armscor FMJ - 2.56
Stronghand - 3.50 ata (w primer na)

So, its around 6 bucks a pop. You provide the shells of course,which can range anywhere 2.50 for once fired to 5.++ for new shells.

batangueno
12-01-2004, 01:45
Originally posted by 9MX
Stronghand - 3.50 ata (w primer na)
4.20 na yata.

9MX
12-01-2004, 02:19
4.20 na ba? nagbibigay naman ng volume disc si stronghand pag by the thousands

atmarcella
12-01-2004, 02:41
Originally posted by darwin25
Sir kung KB ang ikinakatakot mo. Then most probably if you have one(god forbid), pati slide and frame mo di mo pakikinabangan. Just get another gun na pambugbugan.

good advice darwin, i'll think about it:cool:

gunfool
12-01-2004, 21:04
6 bucks a pop is not bad. we got no choice anyway as this is part of our expensive hobby.;f

Eye Cutter
12-01-2004, 21:33
buy in bulk from armscor. the 124gr fmj's come in boxes of 2000rd heads. Sabi ni Bob bago na ang mold gamit nila so the heads are all the same in shape, size and weight. Then pa-load mo na lang sa stronghand, TW, PBB, etc. as needed.

batangueno
12-01-2004, 22:59
Originally posted by Eye Cutter
buy in bulk from armscor. the 124gr fmj's come in boxes of 2000rd heads. Sabi ni Bob bago na ang mold gamit nila so the heads are all the same in shape, size and weight. Doc, magkano per box? Puede rin pang 38super 'yan di ba? :)

Eye Cutter
12-01-2004, 23:14
pwede! yang armscor heads ang gamit nila Boch sa .38super open gun nila. sabay tayo sa order ni dogman para mas malaki discount ibigay ni bob.

batangueno
12-01-2004, 23:20
Originally posted by Eye Cutter
pwede! yang armscor heads ang gamit nila Boch sa .38super open gun nila. sabay tayo sa order ni dogman para mas malaki discount ibigay ni bob. ^c