jcmios
12-16-2004, 12:12
Ok I have worked up three loads with a 185grs Remington Golden Saber and Titegroup.
All loads were using Speer once fired brass and none of them showed any signs of high or over pressure. Temperature was 42 degrees, I was not able to test for accuracy at this time
1) Powder Titegroup 4.9grs
Primer Federal small pistol
Brass Speer Once fired
Bullet Remington 185 Golden Saber
Seat to an OAL of 1.089
Standard velocity 886fps
2) Powder Titegroup 5.1grs
Primer Federal small pistol
Brass Speer Once fired
Bullet Remington 185 Golden Saber
Seat to an OAL of 1.089
Standard velocity 929fps
3) Powder Titegroup 5.3grs
Primer Federal small pistol
Brass Speer Once fired
Bullet Remington 185 Golden Saber
Seat to an OAL of 1.089
Standard velocity 989fps
All loads were using Speer once fired brass and none of them showed any signs of high or over pressure. Temperature was 42 degrees, I was not able to test for accuracy at this time
1) Powder Titegroup 4.9grs
Primer Federal small pistol
Brass Speer Once fired
Bullet Remington 185 Golden Saber
Seat to an OAL of 1.089
Standard velocity 886fps
2) Powder Titegroup 5.1grs
Primer Federal small pistol
Brass Speer Once fired
Bullet Remington 185 Golden Saber
Seat to an OAL of 1.089
Standard velocity 929fps
3) Powder Titegroup 5.3grs
Primer Federal small pistol
Brass Speer Once fired
Bullet Remington 185 Golden Saber
Seat to an OAL of 1.089
Standard velocity 989fps
