Slipstreaming Windows XP [Archive] - Glock Talk

PDA

View Full Version : Slipstreaming Windows XP


Libertas
01-19-2005, 06:19
Hello,

I recently purchased a new computer with Win XP Home. I need software on this computer which requires Win XP Pro. I have Win XP Pro, full version--not OEM--but it is over one year old. When I attempt to upgrade this computer with that XP Pro, I get the following: The version you are installing is OLDER than the current version. At this point, what can I do to successfully load Win XP Pro on this computer?

Slipstreaming? I am not all that familiar with it.

Any other suggestions are welcomed@

Regards

Bronson7
01-19-2005, 08:49
I'm not sure on this, but if it was me, I'd go with a format and full install of XP Pro.
Bronson7

Libertas
01-19-2005, 08:57
Originally posted by Bronson7
I'm not sure on this, but if it was me, I'd go with a format and full install of XP Pro.
Bronson7

I've considered same, but I'm looking for an alternative.

Anyone who is familiar with "slipstreaming", please help!

Thank you!

Regards

SamBuca
01-19-2005, 11:22
http://www.helpwithwindows.com/WindowsXP/winxp-sp2-bootcd.html

This is not what you want to do.

Libertas
01-19-2005, 12:47
Originally posted by SamBuca
http://www.helpwithwindows.com/WindowsXP/winxp-sp2-bootcd.html

This is not what you want to do.

Are you sure? I mean, have you experience with slipstreaming?

Regards

Kjott21
01-19-2005, 14:03
If it is new and there isn't anything on the PC why not just reformat and reinstall. It would be a whole lot easier than anything that I can think of.

MikeG22
01-19-2005, 14:29
That might work to slipstream in SP2 into your install and reburn and try to upgrade. Should work fine. The link above tells you just how to do it. Might as well, SP2 seems to work better if it's slipstreamed in before install anyhow, so it's a good way to go.

When it says it's an older version will it not let up "upgrade"? You will likely need to run the setup yourself, it won't popup a message when you put the cd in asking if you would like to upgrade. Do that and then install SP2 if you'd like after it's done.

Libertas
01-19-2005, 14:48
Originally posted by MikeG22
That might work to slipstream in SP2 into your install and reburn and try to upgrade. Should work fine. The link above tells you just how to do it. Might as well, SP2 seems to work better if it's slipstreamed in before install anyhow, so it's a good way to go.

When it says it's an older version will it not let up "upgrade"? You will likely need to run the setup yourself, it won't popup a message when you put the cd in asking if you would like to upgrade. Do that and then install SP2 if you'd like after it's done.

Thanks!

Regards

fastvfr
01-19-2005, 16:02
I used nLite to make an iso of my XP Pro and slipstreamed SP1a into one and the 270MB+ SP2 into the other.

Then I burned the images with Nero 6.5 and they both work fine.

SamBuca
01-19-2005, 16:04
Originally posted by Libertas
Are you sure? I mean, have you experience with slipstreaming?

Regards
I pay the rent by doing this :)

Do NOT upgrade Home to Professional. MS has a knowledge base article on how to do it, but it's prone to other problems.

Back up your important stuff and reinstall with a fresh copy of XP Pro (in which case you can either slipstream SP2 into it or just install SP2 after the initial install).

Washington,D.C.
01-19-2005, 17:40
Now it's time to delve a bit deeper and uncover some of Windows XP's secrets.

1. It boasts how long it can stay up. Whereas previous versions of Windows were coy about how long they went between boots, XP is positively proud of its stamina. Go to the Command Prompt in the Accessories menu from the All Programs start button option, and then type 'systeminfo'. The computer will produce a lot of useful info, including the uptime. If you want to keep these, type 'systeminfo > info.txt'. This creates a file called info.txt you can look at later with Notepad. (Professional Edition only).

2. You can delete files immediately, without having them move to the Recycle Bin first. Go to the Start menu, select Run... and type 'gpedit.msc'; then select User Configuration, Administrative Templates, Windows Components, Windows Explorer and find the Do not move deleted files to the Recycle Bin setting. Set it. Poking around in gpedit will reveal a great many interface and system options, but take care -- some may stop your computer behaving as you wish. (Professional Edition only).

3. You can lock your XP workstation with two clicks of the mouse. Create a new shortcut on your desktop using a right mouse click, and enter 'rundll32.exe user32.dll,LockWorkStation' in the location field. Give the shortcut a name you like. That's it -- just double click on it and your computer will be locked. And if that's not easy enough, Windows key + L will do the same.

4. XP hides some system software you might want to remove, such as Windows Messenger, but you can tickle it and make it disgorge everything. Using Notepad or Edit, edit the text file /windows/inf/sysoc.inf, search for the word 'hide' and remove it. You can then go to the Add or Remove Programs in the Control Panel, select Add/Remove Windows Components and there will be your prey, exposed and vulnerable.

5. For those skilled in the art of DOS batch files, XP has a number of interesting new commands. These include 'eventcreate' and 'eventtriggers' for creating and watching system events, 'typeperf' for monitoring performance of various subsystems, and 'schtasks' for handling scheduled tasks. As usual, typing the command name followed by /? will give a list of options -- they're all far too baroque to go into here.

6. XP has IP version 6 support -- the next generation of IP. Unfortunately this is more than your ISP has, so you can only experiment with this on your LAN. Type 'ipv6 install' into Run... (it's OK, it won't ruin your existing network setup) and then 'ipv6 /?' at the command line to find out more. If you don't know what IPv6 is, don't worry and don't bother.

7. You can at last get rid of tasks on the computer from the command line by using 'taskkill /pid' and the task number, or just 'tskill' and the process number. Find that out by typing 'tasklist', which will also tell you a lot about what's going on in your system.

8. XP will treat Zip files like folders, which is nice if you've got a fast machine. On slower machines, you can make XP leave zip files well alone by typing 'regsvr32 /u zipfldr.dll' at the command line. If you change your mind later, you can put things back as they were by typing 'regsvr32 zipfldr.dll'.

9. XP has ClearType -- Microsoft's anti-aliasing font display technology -- but doesn't have it enabled by default. It's well worth trying, especially if you were there for DOS and all those years of staring at a screen have given you the eyes of an astigmatic bat. To enable ClearType, right click on the desktop, select Properties, Appearance, Effects, select ClearType from the second drop-down menu and enable the selection. Expect best results on laptop displays. If you want to use ClearType on the Welcome login screen as well, set the registry entry HKEY_USERS/.DEFAULT/Control Panel/Desktop/FontSmoothingType to 2.

10. You can use Remote Assistance to help a friend who's using network address translation (NAT) on a home network, but not automatically. Get your pal to email you a Remote Assistance invitation and edit the file. Under the RCTICKET attribute will be a NAT IP address, like 192.168.1.10. Replace this with your chum's real IP address -- they can find this out by going to www.whatismyip.com -- and get them to make sure that they've got port 3389 open on their firewall and forwarded to the errant computer.

11. You can run a program as a different user without logging out and back in again. Right click the icon, select Run As... and enter the user name and password you want to use. This only applies for that run. The trick is particularly useful if you need to have administrative permissions to install a program, which many require. Note that you can have some fun by running programs multiple times on the same system as different users, but this can have unforeseen effects.

12. Windows XP can be very insistent about you checking for auto updates, registering a Passport, using Windows Messenger and so on. After a while, the nagging goes away, but if you feel you might slip the bonds of sanity before that point, run Regedit, go to HKEY_CURRENT_USER/Software/Microsoft/Windows/Current Version/Explorer/Advanced and create a DWORD value called EnableBalloonTips with a value of 0.

13. You can start up without needing to enter a user name or password. Select Run... from the start menu and type 'control userpasswords2', which will open the user accounts application. On the Users tab, clear the box for Users Must Enter A User Name And Password To Use This Computer, and click on OK. An Automatically Log On dialog box will appear; enter the user name and password for the account you want to use.

14. Internet Explorer 6 will automatically delete temporary files, but only if you tell it to. Start the browser, select Tools / Internet Options... and Advanced, go down to the Security area and check the box to Empty Temporary Internet Files folder when browser is closed.

15. XP comes with a free Network Activity Light, just in case you can't see the LEDs twinkle on your network card. Right click on My Network Places on the desktop, then select Properties. Right click on the description for your LAN or dial-up connection, select Properties, then check the Show icon in notification area when connected box. You'll now see a tiny network icon on the right of your task bar that glimmers nicely during network traffic.

16. The Start Menu can be leisurely when it decides to appear, but you can speed things along by changing the registry entry HKEY_CURRENT_USER/Control Panel/Desktop/MenuShowDelay from the default 400 to something a little snappier. Like 0.

17. You can rename loads of files at once in Windows Explorer. Highlight a set of files in a window, then right click on one and rename it. All the other files will be renamed to that name, with individual numbers in brackets to distinguish them. Also, in a folder you can arrange icons in alphabetised groups by View, Arrange Icon By... Show In Groups.

18. Windows Media Player will display the cover art for albums as it plays the tracks -- if it found the picture on the Internet when you copied the tracks from the CD. If it didn't, or if you have lots of pre-WMP music files, you can put your own copy of the cover art in the same directory as the tracks. Just call it folder.jpg and Windows Media Player will pick it up and display it.

19. Windows key + Break brings up the System Properties dialogue box; Windows key + D brings up the desktop; Windows key + Tab moves through the taskbar buttons.