ok ang gun show! specially trueweight! [Archive] - Glock Talk

PDA

View Full Version : ok ang gun show! specially trueweight!


bertud ng putik
07-14-2005, 00:48
i went sa gunshow, at nakabili ako ng allen grip screw yung stainless ang brand niya ay KINGS. sa trueweight ko nabili. nakita ko yung mga STI guns nila na naka hard chrome (dull finish) ANG GANDA. sa lahat ng booth doon sila ang may polidong hard chrome dull finish. i ask them 4k daw sa signle stack 1911 ang price pa chrome. sino na naka pag hard chrome dito sa kanila? any comment?

di ko tuloy alam kung sa trueweight ako pa hard chrome or col. bayang tuloy... di ko pa kasi nakikita gawa ni col. eh! any suggestion? but col. bayang is cheaper kasi 3k sa kanya.:)

Alexii
07-14-2005, 01:03
If you like what you saw, then let them do the hard-chroming for you. At least nakita mo na resulta ng gawa. Ask also the turn-around time and warranty. As per several BOGs' advice, avoid TrueWeight's nephews.;)

bertud ng putik
07-14-2005, 01:14
Originally posted by Alexii
If you like what you saw, then let them do the hard-chroming for you. At least nakita mo na resulta ng gawa. Ask also the turn-around time and warranty. As per several BOGs' advice, avoid TrueWeight's nephews.;)

what do you mean by trueweights nephews?

Alexii
07-14-2005, 01:26
Some of the BOGs had been turned off by the nephews of the owner, Roland Tan. But Roland himself is nice and accommodating, so is his daughter Grace. Just a little inside info so you'd know what to expect if it's your first time dealing with them.

bertud ng putik
07-14-2005, 01:56
Originally posted by Alexii
Some of the BOGs had been turned off by the nephews of the owner, Roland Tan. But Roland himself is nice and accommodating, so is his daughter Grace. Just a little inside info so you'd know what to expect if it's your first time dealing with them.

ahh i see, kanina nga sa gun show medyo antipatiko yung isa sa mga lalaki. medyo bata pa, cguro nephew yung kausap ko. pero sa gawa nila specially hard chrome no comment naman kaya at pulido nga? syempre minsan iba ang display sa gun show. mas pinapaganda di ba? kasi 2 lang pinag pipilian ko, col. bayang or trueweight.

9MX
07-14-2005, 02:08
Originally posted by bertud ng putik
ahh i see, kanina nga sa gun show medyo antipatiko yung isa sa mga lalaki.

iwagayway mo ang datung, babait yan:(

nrmcolt
07-14-2005, 02:19
Originally posted by 9MX
iwagayway mo ang datung, babait yan:(

;z How true!

gunfool
07-14-2005, 03:11
Originally posted by 9MX
iwagayway mo ang datung, babait yan:( True and it's pretty much proven.;z ;z ;z

Eye Cutter
07-14-2005, 03:55
pinaka maganda magpa hard chrome kay art lantin! hahahaha!! bling-bling with spinners pa!

Pepe G Boy
07-14-2005, 04:20
Originally posted by Eye Cutter
pinaka maganda magpa hard chrome kay art lantin! hahahaha!! bling-bling with spinners pa!

wala yata akong nakitang display ni art lantin kanina.

JEZZZ
07-14-2005, 05:31
Mga sir,
ano po masasabi niyo sa BUL m5 IPSC cal 40 Frame na on sale sa gunshow for 30T? mga magkano pa po kailangan para mabuo yon? newbie po ako kaya wala po akong idea pero nakuha ng bull m5 attention ko kanina. P16 PXT cal 40... may gumamit na ba nito dito sa pinas at musta po ang feedback?

maraming salamat po!;Q ;Q ;Q

Eye Cutter
07-14-2005, 05:46
i have a bul m5. bought it from trust trade back in 98. problem with the bul frame, the rail is integrated with the grip. the channel where the mag catch pin locks gave in (plastic kasi). gastado na. the mag falls bec. the catch won't lock to the frame anymore. the gunsmiths tried to remedy it pero masyado na malaki kinain.

kanina, i went to trust trade to ask assistance how to go about warranty services. kausap ko yung isang sales person dun, yung paolo and his supervisor or something, si boy karunungan. they said they can't help me since they are not the bul m5 importer anymore and for me to just buy another frame! tsk, tsk, e sa inyo ko binili yung pistol ko! all i'm asking is how do you go about warranty services for your clients??? hello!!!??? talaga naman... nagpanting tenga ko dun!

sad to say, as in most retail establishments here in the islands, you're left alone to fend for yourself after the sale has been made... wala ng after-sales service!

i got to email bul transmark to inquire how they go about repairing their frame.

moral of the story...

wala lang, get a para ord from deenoh of weapons systems corporation. at least all steel, pag masira, madali remedyuhan!

JEZZZ
07-14-2005, 05:59
sir EC sir,

thanks a lot! i will definitely go for the paraord... ang ganda ng p16 pxt .40 nila. tawag muna ako kay misis baka sakaling pwede niya iregalosa beerday ko hehehe.

ang ganda nong resulta kanina ng p14 yata yon na nilongdust nila. ang galing ang pagkagawa. sa point of view ko po yan sir bilang newbie baka kasi may kokontra eh.

piece of advice naman sir, newbie po ako at wala akong alam sa ipsc... san kaya ako pwede magstart? at ok lang po ba na sa .40 ako magstart? may background po ako konti sa baril pero limited lang po talaga. ;Q ;Q ;Q

Eye Cutter
07-14-2005, 06:07
http://img.photobucket.com/albums/v483/eyecutter/WSCP14-45Right.jpg

yep! very nice para ord

napinap
07-14-2005, 18:09
for fellows BOGs na nakapaysyal na sa gunshow, by any chance meron bang KKM barrel for glock19 na nakadisplay?

many tnx

asian_glockster
07-14-2005, 21:30
MR EC SIR,

Did you get any reply from Bul Transmark regarding the repair of the frame? I have a Bul m5 .45.

Is it advisable to replace the mag-catch pin with an aftermarket one?

asian_glcokster

Eye Cutter
07-15-2005, 00:23
wala pa. nawalan na ko gana sa bul m5 ko e mula ng binuo ko para p16-40

mc_oliver
07-15-2005, 01:46
Mey nakakita na ba dyan ng isang litung-litong mama na 'di alam kung ano'ng klaseng open ang gagwin? ;f;f

Eye Cutter
07-15-2005, 02:36
hehehe! yung open gun ko unimpisahan na i-fit yung slide and barrel sa frame!

yung mama ba na yan e malakas din kay mannix?

jasonub
07-15-2005, 05:39
Originally posted by mc_oliver
Mey nakakita na ba dyan ng isang litung-litong mama na 'di alam kung ano'ng klaseng open ang gagwin? ;f;f

got a armscor 9mm 20% discount around 17t. buddy is cheaper by around 2t. got 2 mags na extra also.

sam is selling a high cap 9 for....11t. but unsupported chamber

asian_glockster
07-15-2005, 07:43
Originally posted by Eye Cutter:
wala pa. nawalan na ko gana sa bul m5 ko e mula ng binuo ko para p16-40

Thanks, EC sir. nun tinanggal ko at ikinabit ko yung mag catch ay sumabit yung pin nya kaya medyo may lamat na rin.

i_am_infinity
07-15-2005, 08:08
Doc,

Regarding Bul m5


a few years ago before i started shooting a 45 i was planning already to buy a 1911 and i was setting my eyes on the BUL so i contacted BUL Israel and was able to talk to Saul Kirsch he wasn't that popular during that time. anyway i asked them about warranty and they said that i should let them know and they will arrange something...have u tried contacting Saul Kirsch? i think he might be able to help u with ur BUL.


Regarding Trueweight Chroming

They don't do their own chroming, they send it to a guy in STA. MESA kaya lang pag may problema walang back job. i sent my Springfield there (Sta. Mesa Guy) last year pag kuha ko gun ko parang may MAP ung Finish so i showed him pag uulitin daw i have to pay again...SUCH A NICE PERSON TO DEAL WITH:( :( ok na din cguro ka COL. Bayang kung ok ang back job just in case palpak ung gawa nila.

thanks

royal glockster
07-15-2005, 08:55
Originally posted by i_am_infinity
Doc,


Regarding Trueweight Chroming

They don't do their own chroming, they send it to a guy in STA. MESA kaya lang pag may problema walang back job. i sent my Springfield there (Sta. Mesa Guy) last year pag kuha ko gun ko parang may MAP ung Finish so i showed him pag uulitin daw i have to pay again...SUCH A NICE PERSON TO DEAL WITH:( :( ok na din cguro ka COL. Bayang kung ok ang back job just in case palpak ung gawa nila.

thanks

i have mine done by col. bayang, maganda ang finish at may warranty ang gawa nila. :cool: Check his customized norincos at trust trade. Famous sya to modify norincos into an STI look long dust cover with his signature "bayang cut" pilipit serration. Last year, displayed ang gawa nya sa trust trade. I dont know now kung andyan pa rin. I have not yet visited the gunshow, saturday pa ko pupunta. I will stroll at the gunshow the whole day. ;f

Eye Cutter
07-15-2005, 18:30
di ko pa nga na-e-email bul transmark.

wala ako nakitang murang ambi safety. most likely, i'll get an EB or King's ambi from truweight.

bulm540
07-15-2005, 22:55
Originally posted by Eye Cutter
i have a bul m5. bought it from trust trade back in 98. problem with the bul frame, the rail is integrated with the grip. the channel where the mag catch pin locks gave in (plastic kasi). gastado na. the mag falls bec. the catch won't lock to the frame anymore. the gunsmiths tried to remedy it pero masyado na malaki kinain.

kanina, i went to trust trade to ask assistance how to go about warranty services. kausap ko yung isang sales person dun, yung paolo and his supervisor or something, si boy karunungan. they said they can't help me since they are not the bul m5 importer anymore and for me to just buy another frame! tsk, tsk, e sa inyo ko binili yung pistol ko! all i'm asking is how do you go about warranty services for your clients??? hello!!!??? talaga naman... nagpanting tenga ko dun!

sad to say, as in most retail establishments here in the islands, you're left alone to fend for yourself after the sale has been made... wala ng after-sales service!

i got to email bul transmark to inquire how they go about repairing their frame.

moral of the story...

wala lang, get a para ord from deenoh of weapons systems corporation. at least all steel, pag masira, madali remedyuhan!
I had the same thing happen to me eyecutter. I contacted Saul Kirsch and they remedied it.

mikol
07-15-2005, 23:41
Originally posted by jasonub
sam is selling a high cap 9 for....11t. but unsupported chamber ;P???? GM Jason is this a new prodduction of SAM? I thought they only have a .40 cal high cap pistol. ;T sayang wala ako dyan, iba kasi talaga pag gun show price talagang mababa presyo. even the armscor 9mm high cap is very cheap for 17k. to think that the armscor "buddy" single stack in cebu is already 16k unit price.:(

jasonub
07-16-2005, 00:17
on the way out i just asked them how much is their hi cap 9 mm and is it forged or casted steel.

the answer was 11t for the 9mm and its forged steel.

nagdalawang isip tuloy ako if ill get an armscor or sam,

then they said the 9mm has an unramped therefore unsupported barrel. that made me decide to get the armscor.

isuzu
07-19-2005, 18:56
Originally posted by bulm540
I had the same thing happen to me eyecutter. I contacted Saul Kirsch and they remedied it.

Got a chance to shoot BULM540's BulM5 sometime last year. It was one sweet shooting pistol! I had fun shooting it! He has shot it a lot, but still never skipped a beat! BTW, I shot it at their club's local match after getting familiarized with it. Got good scores with it(their gun club offered good hospitality, too).

BULM540, please post the contact no. or email address of Saul Kirsch. He might be able to help our kababayans who are having trouble with their BulM5s.:cool:

New_comer
07-19-2005, 19:36
Originally posted by Eye Cutter
i have a bul m5. bought it from trust trade back in 98. problem with the bul frame, the rail is integrated with the grip. the channel where the mag catch pin locks gave in (plastic kasi). gastado na. the mag falls bec. the catch won't lock to the frame anymore. the gunsmiths tried to remedy it pero masyado na malaki kinain... Doc EC, may pics ba nito?

I was thinking if you've already tried using Devcon Steel epoxy to build up the eroded portion, machine drilled na lang to proper hole alignment/diameter. Pwede nga yun pang engine block e, siguro naman pwede sa plastic yun. Mag tension lang naman and dadalhin nya.

Eye Cutter
07-19-2005, 22:35
yup. i'll try selley's epoxy putty to build up the frame and form the channel.