Glock Serial Number Research Project (New)

[Dandapani]

i have a glock 22 with the first the letters marked DCT


anyone know date of this gun???

As stated above, no one but Glock KNOWS the date for your gun. I list every prefix, model and date posted in this thread in the first page.

From our list, I estimate: May/June 1999

DCM - G-17 - May 1999 - 3rd Gen.
DCN - G-17 - June 1999 - 3rd Gen. - 2 pin Frame
DCP - G-19 - Unknown - 3rd Gen. - 2 pin frame
DCR - G-20 / G-32 - May 1999 - 3rd Gen.
DCT - G-22
DCU - G-22 - June 1999 - 3rd Gen. - bought in Sept 2005 in the original case with Factory Reconditioned tag on it
DCW - G-23 - May 1999 - 3rd Gen.

[SouthpawShootr]

MAR - G27 - April 21, 2008 - 3rd Generation

[harleyman959798]

As stated above, no one but Glock KNOWS the date for your gun. I list every prefix, model and date posted in this thread in the first page.

From our list, I estimate: May/June 1999

DCM - G-17 - May 1999 - 3rd Gen.
DCN - G-17 - June 1999 - 3rd Gen. - 2 pin Frame
DCP - G-19 - Unknown - 3rd Gen. - 2 pin frame
DCR - G-20 / G-32 - May 1999 - 3rd Gen.
DCT - G-22
DCU - G-22 - June 1999 - 3rd Gen. - bought in Sept 2005 in the original case with Factory Reconditioned tag on it
DCW - G-23 - May 1999 - 3rd Gen.


called glock today. the DCT on my gun was built november 18 2005. was issued to illinois state police

[Dandapani]

called glock today. the DCT on my gun was built november 18 2005. was issued to illinois state police

I suspect it is a Refurb. Look at the DCU listing. The overall date is too new for the rest of the series. I'll list it with your data.

IIRC, there's a number stamped inside the dust cover for a refurb underneath where the barrel rests. Not 100% sure on this. Someone will come along and correct me. :)

[harleyman959798]

I suspect it is a Refurb. Look at the DCU listing. The overall date is too new for the rest of the series. I'll list it with your data.

IIRC, there's a number stamped inside the dust cover for a refurb underneath where the barrel rests. Not 100% sure on this. Someone will come along and correct me. :)

i asked glock if it was refurb they said it was not. also talked to a tech guy there and asked him also, including if it ever had any recalls or work done on it, and he said nothing showed,

[Sundance34]

Talked with Glock today.
KEW prefix.........Glock 21......June 2006................:cool:

[Dandapani]

i asked glock if it was refurb they said it was not. also talked to a tech guy there and asked him also, including if it ever had any recalls or work done on it, and he said nothing showed,

Ok. Trying to figure out Glock's alpha scheme is mystery. :patriot:

[Dandapani]

Talked with Glock today.
KEW prefix.........Glock 21......June 2006................:cool:

Recorded. Thanks! :wavey:

[oldnoob]

fresh out of womb!

MDF.....G22.....3rd Gen.....May 2008

[Snapper2]

MCBXXX on a g27 bought last month. ?

[Dandapani]

MCBXXX on a g27 bought last month. ?

This is a brand new Glock. Look in your paperwork. There should be a little brown envelope containing two fired cartridge casings... What's the DATE on that envelope? :wavey:

[Snapper2]

This is a brand new Glock. Look in your paperwork. There should be a little brown envelope containing two fired cartridge casings... What's the DATE on that envelope? :wavey:

4-09-08

[GSD17]

Worked on this one the other day..

DAV - G-22 - unknown date - 3rd Gen - Cherokee County, GA Sheriff's Office

[GSD17]

Another

HXE - G-27 - unknown - 2.5 Gen -

[Dandapani]

Worked on this one the other day..

DAV - G-22 - unknown date - 3rd Gen - Cherokee County, GA Sheriff's Office

Another

HXE - G-27 - unknown - 2.5 Gen -

Thanks, GSD! :patriot:

[LABMAN]

Picked up new G36 yesterday...born on 5/22/08...MCGxxx...Black w/GNS

[bwheeler03]

LFP - G35 - Glock Sights - 7/23/07

[itch]

KGA - G26 3rd gen bought in the Philippines in Jan 07

[Fallguy173]

LHZ - G-20 - January 2008 - 3rd Gen. - Blue Label, Fixed Sights, 3 Mags


:wavey:

[Dandapani]

LHZ - G-20 - January 2008 - 3rd Gen. - Blue Label, Fixed Sights, 3 Mags


:wavey:

Beautiful post, just cut and paste! Thank you! :number1:

[Fallguy173]

That is exactly what I do. I cut yours from the nearst match in the list, and then modify it for my info.:supergrin:

[bronco1500]

LZY prefix 5-19-2008 mod 22. stock. Blue, 3 mags

[Snapper2]

LHZ - G-20 - January 2008 - 3rd Gen. - Blue Label, Fixed Sights, 3 Mags


:wavey:

what does blue label mean. sorry for the question

[Dandapani]

what does blue label mean. sorry for the question

LEO package and pricing. 3 mags for everything except sub-compacts.

[Dandapani]

That is exactly what I do. I cut yours from the nearst match in the list, and then modify it for my info.:supergrin:

Great minds... :whistling:

[bigeagle57]

MDS - G-19 - 05/08 - 3rd gen.

[LABMAN]

Glock 29 10mm, Od Green, 12/21/07 - Ktgxxx

[cashion]

MEE - G-23 - May 2008 - 3rd Gen.

[Remington700VS]

HUM G22 3rd Generation
Jan 6, 2007

[spectre765]

CDM - G-30 - May 1997 - 2.5 Gen. - no rail, "US" suffix
GRC - G-36 - Dec 2004 - 3rd Gen. - no rail, no "US" suffix

[hardonem]

MAG5XX G23 3RD GEN. LEO/MIL
Austrian manufactured - MAY 21, 2008

Purchased 14 JUN 08 (Army's Birthday) in Norfolk, VA.

[EdMan63]

LZW xxx G19 3rd Generation

Born 4/2008

[Coogan]

MDK - G-27 - Unknown - 2.5 Gen

MEY - G-19 - Unknown - 2.5 Gen

MFG - G-23 - Unknown - 2.5 Gen

[Dandapani]

MDK - G-27 - Unknown - 2.5 Gen

MEY - G-19 - Unknown - 2.5 Gen

MFG - G-23 - Unknown - 2.5 Gen

:wavey: Coogan. The last two are the highest thus far submitted!

[Fallguy173]

CDM - G-30 - May 1997 - 2.5 Gen. - no rail, "US" suffix


Hey! Those are my initials.:wow::cool:

[OgenRwot]

KDG - G21 - 7/10/07 - 3rd Gen - OD Green

KSC - G19 - 12/27/06 - 3rd Gen

[mojonixon]

DZY###US - G-23 - december 18 2000 - 3rd Gen. - Made in Austria
US in serial number only stamped on frame
pentagon on the side of barrel
.40 on top of barrel

[v65magnafan]

G22 Serial#LAPXXX

Date Collected April 17, 2007

Stock sights. 10RD Mags for Canada

Purchased near Toronto

June 19, 2008

[MSB9021]

CRS - G21 - 1998 - 3rd Gen

CWK - G21 - 1998 - 3rd Gen

LAT - G21SF - April 2007 - 3rd Gen pic rail/ambi mag rel. red label 2-13rd mags.

MDA - G19 - April 2008 - 3rd Gen red label, 2-15rd mags.

[vqv123]

MDT- 3rd Gen G19

[sel36]

I have a used 23 with the digits---CMN. Any ideas?

[Dandapani]

I have a used 23 with the digits---CMN. Any ideas?

1) Call Glock for exact answer.

2) My guess is Nov/Dec 1997, based on these entries:

CMK - G-22 - November 1997 - 2nd Gen.
CML - G-22 - December 1997
CMM - G-23 - November 1997 - 2nd Gen.
CMN - G-23
CMP - G-23 - December 1997 - 2nd Gen. - Sticker on case says LE/Military Only. Black 8lb connector. Purchased used.

[sel36]

1) Call Glock for exact answer.

2) My guess is Nov/Dec 1997, based on these entries:

CMK - G-22 - November 1997 - 2nd Gen.
CML - G-22 - December 1997
CMM - G-23 - November 1997 - 2nd Gen.
CMN - G-23
CMP - G-23 - December 1997 - 2nd Gen. - Sticker on case says LE/Military Only. Black 8lb connector. Purchased used.


Thanks for the quick response.

[Dandapani]

Thanks for the quick response.

I'm here to serve. :patriot:

[9mmPKR]

G19 UR3XX US Can you tell me the born on date? Please?

[Dandapani]

G19 UR3XX US Can you tell me the born on date? Please?

1) Call Glock for accurate answer.

2) My guess is: May 1991.

There seems to be some jitter in the dates in this time frame, so I can't say with much certainty.

UG - G-17 - July 1991 - 2nd Gen.
UH - G-20 - February 1991 - 2nd Gen.
UL - G-20 - March 1991 - 2nd Gen. - marked "10mm" only
UM - G-20 - March 1991 - 2nd Gen.
UP - G-19 - May 1991 - 2nd Gen.
UR - G-19
US - G-20 - March 1991 - 2nd Gen.
UT - G-20 - April 1991 - 2nd Gen. - marked "10mm" only.
UW - G-20 - April 1991 - 2nd Gen.
UY - G-21 - May 1991 - 2nd Gen.

[griggrt]

GXT- G-22- Purchased 2/25/2005 - 3rd Gen. - Austrian Markings

[Dandapani]

GXT- G-22- Purchased 2/25/2005 - 3rd Gen. - Austrian Markings

Do you have all the paper work with your G22? There's should be a little brown envelope with two fired cartridge casings. What's the date on that envelope? That's the date we list in the serial number database.

[griggrt]

I apologize.

Corrected

GXT- G-22- 2/11/2005 - 3rd Gen. - Austrian Markings

[Dandapani]

I apologize.

Corrected

GXT- G-22- 2/11/2005 - 3rd Gen. - Austrian Markings

NP - :patriot:

[jdmb03]

G26, Kpd, 12/2006

[mjc577]

Hello writing of Buenos Aires, Argentina and would like to know because Glock does not use the letter "I" in the serial numbers, someone you know?
thanks, and sorry for my English:wavey:

[Dandapani]

Hello writing of Buenos Aires, Argentina and would like to know because Glock does not use the letter "I" in the serial numbers, someone you know?
thanks, and sorry for my English:wavey:

So far, no I:

AA-ZZ, AAA-AZZ, BAA-BZZ, CAA-CZZ, DAA-DZZ, EAA-EZZ, FAA-FZZ, GAA-GZZ, HAA-HZZ, KAA-KZZ, LAA-LZZ, MAA-MZZ.

[mark72005]

G19 - Ltg - 1-16-08
G27 - Lye - 3-11-08

[jackson1010]

KZV G-22 May7/2007 3rd gen. Fixed sights 2 hi cap mag. red label

[Coogan]

MFE - G-27 - Unknown - 2.5 Gen


AND a correction:

MFC - G-23 - Unknown - 3rd Gen (I typoed MFG on my notes)

[Dandapani]

MFE - G-27 - Unknown - 2.5 Gen


AND a correction:

MFC - G-23 - Unknown - 3rd Gen (I typoed MFG on my notes)

Ok, got them both. MFE is the highest thus far reported.

[JLai]

Here's mine...

MAF - G23 - 05/20/08 - 3rd Gen - Made in Austria

[LABMAN]

G27-Blue Label-Xslide stop-cartridge fired on 4/22/08-MAR7xx-$398.00+tax

[Dandapani]

G27-Blue Label-Xslide stop-cartridge fired on 4/22/08-MAR7xx-$398.00+tax

MAR - G-27 - April 2008 - - Blue Label, Xslide stop

[Remington700VS]

G22 Hum

[Dandapani]

G22 Hum


HUM - G-22 - January 2007 - 3rd Gen.

[JICC]

LZS - G17 - June 2008 - 3rd Gen - Red Label, 2 ambi 17 rd mags, Glock Night Sights

[Dandapani]

LZS - G17 - June 2008 - 3rd Gen - Red Label, 2 ambi 17 rd mags, Glock Night Sights

Is this the date off the little brown envelope containing two fired casings that's included with your paperwork?

[JICC]

Is this the date off the little brown envelope containing two fired casings that's included with your paperwork?

Yes sir !!!

[Dandapani]

Yes sir !!!

Thanks. Listed yours in the database :patriot:

[ClydeG19]

HKT - G22 - Aug 2005 3rd gen blue label

[eric1]

g19, date cartridge collected 2/15/08, LXK serial, red label

[Bigfunkytown]

CTM- G21 - 1998 3rd Gen With Flat Black Slide- INFO FROM FRAME/BARREL PERCHASED USED.

[Dandapani]

CTM- G21 - 1998 3rd Gen With Flat Black Slide- INFO FROM FRAME/BARREL PERCHASED USED.

CTM - G-21 - June 1998 - 3rd Gen.

[Frankenteg]

LFY- G19- Aug 2007- 3rd Gen- (2) 17 rnd mags.

[rotax650]

g36 mghxxx 6/26/2008

[Arcana]

G26 - LMZ - 10/2007 (from casings)

[ShortyJackson]

MFU8XX - G21SF blue label, ambi mag, std rail - test fired 6/23/08

[fiat_justicia]

ERE9XX - G26 3rd gen, test fired 10/30/07

[Dandapani]

ERE9XX - G26 3rd gen, test fired 10/30/07

Have you called Glock to see if yours is on the "frame upgrade" list?

[LABMAN]

ERE9XX - G26 3rd gen, test fired 10/30/07

That don't look right..E series frames were before 10/07...Refurb?

[fiat_justicia]

Have you called Glock to see if yours is on the "frame upgrade" list?

No, I'll give them a call on Monday. Didn't realize the E series G26 were part of the frame upgrade list.

Thanks for the heads up!

[fiat_justicia]

That don't look right..E series frames were before 10/07...Refurb?

I really don't know to be honest. It looks brand new, but was sold as a used gun and the envelope with the fired case (along with all the accessories, etc) were included.

It also has the integral lock in the backstrap, although I'm not sure if that helps date it. If I remember correctly the integral lock was not included in the frames that had issues? Didn't the built in lock come to Glock at a much later time?

If it is a refurb, I would assume since they had the pistol 10/30/07 they would have performed whatever upgrades were necessary. There is no 1- in front of the serial # however, and the included manual has a revision date of 11/06 on the back.

Maybe an used serial # from long ago? I'm not sure, I'll call Monday and ask for the gun's history.

[LABMAN]

I really don't know to be honest. It looks brand new, but was sold as a used gun and the envelope with the fired case (along with all the accessories, etc) were included.

It also has the integral lock in the backstrap, although I'm not sure if that helps date it. If I remember correctly the integral lock was not included in the frames that had issues? Didn't the built in lock come to Glock at a much later time?

If it is a refurb, I would assume since they had the pistol 10/30/07 they would have performed whatever upgrades were necessary. There is no 1- in front of the serial # however, and the included manual has a revision date of 11/06 on the back.

Maybe an used serial # from long ago? I'm not sure, I'll call Monday and ask for the gun's history.


All Glock frames from EAA to EZZ had the potential to have issues, not all did, but could have, issue was rails..A factory refurb would be marked on label on box...

[fiat_justicia]

No such notation on the clam shell. It came in a clam shell box, label simply has Glock 26 on the left above the UPC, ERE9XX below the upc, W/LOCK above right UPC, and across the top of the sticker it says FXD 5.5LB.

It was obviously at the factory 10/30/07, but I have no way of knowing the rest of it's history until Monday. Hope I get a friendly tech on the line...heheh
Wish I had a side by side picture to see the "needs replacement" vs "replaced" frame rails, then I'd know for sure.

[Dandapani]

That don't look right..E series frames were before 10/07...Refurb?

Good question. I looked at it a few minutes before I listed it. Look at the one following:

ERE - G-26 - October 2007 - 3rd Gen.
ERF - G-27 - August 2007 - - per Glock, made in March 2004, but fired casings said 8/07

Perhaps Glock had a cache of these "E" and was hesitant to release them owing to the recall status.

[LABMAN]

Good question. I looked at it a few minutes before I listed it. Look at the one following:

ERE - G-26 - October 2007 - 3rd Gen.
ERF - G-27 - August 2007 - - per Glock, made in March 2004, but fired casings said 8/07

Perhaps Glock had a cache of these "E" and was hesitant to release them owing to the recall status.

That's about only thing that makes sense..Can't wait for his post after phone call Monday..Why now? Have the rails healed themselves?

[Dandapani]

That's about only thing that makes sense..Can't wait for his post after phone call Monday..Why now? Have the rails healed themselves?

The rails that failed had a sharp crease rather than an rolled over edge. Perhaps these few that were held back were somewhere between and they needed some real world data to see if they would work out ok... Always fun second-guessing Glock! :rofl::wavey:

[fiat_justicia]

Does anyone know if the frames made in 2004 that were recalled (upgrade, whatever..lol) had the integral lock?

My best guess is this has no 1- because they waited for the new frame to come from Austria and replaced it in 10/07 either for the gun shop I traded for it from, or the previous owner. I'm almost positive the integral lock in the backstrap was not around when the frames that had the issues were being made.

I'll keep you updated! Until then, here's a pic of the rear rails:
http://i227.photobucket.com/albums/dd110/aang2007/frame.jpg

Feel free to delete any posts necessary, I never intended to clog up this important thread with my replies.
Thanks for the help!

[Coogan]

MFM - G-19 - Unknown - 3rd Gen

MFY - G-23 - Unknown - 3rd Gen

[mad.gunsmith]

Hello I got a G17 with serial LFY the shells have thee date of <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:date Month="8" Day="7" Year="2007">August 07 2007</st1:date> is this a typo?<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
"LFY - G-19 - August 2007 - 3rd Gen. - (2) 17 rnd mags."<o:p></o:p>
<o:p> </o:p>
Also come with the Gen 4 mags <o:p></o:p>
They are some number (10 digits) on the frame just above the pins and I have no idea what they are <o:p></o:p>
Can some one tell me what are they? <o:p></o:p>

[sndstrm210]

DYY--G23--3rd Gen--Unknown Frame says "made in Austria" Serial number on frame has "US" suffix Barrell as ".40" stamped on top and the serial number followed by the Glock logo followed by a pentagon on the side. Trijicon Night sites installed, bought used this way, factory? 2 13 rd magazines stamped "Restricted LE/GOVT Only"

[Dandapani]

Hello I got a G17 with serial LFY the shells have thee date of <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" /><st1:date Month="8" Day="7" Year="2007">August 07 2007</st1:date> is this a typo?<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
"LFY - G-19 - August 2007 - 3rd Gen. - (2) 17 rnd mags."<o:p></o:p>
<o:p> </o:p>
Also come with the Gen 4 mags <o:p></o:p>
They are some number (10 digits) on the frame just above the pins and I have no idea what they are <o:p></o:p>
Can some one tell me what are they? <o:p></o:p>

The date is correct. Matches the one we already have. The mags have the broad cut out on the front for the ambi-release?

Others have reported extra numbers on the frame.

Look at the frame. Does it say "Made In Austria"?

[Dandapani]

DYY--G23--3rd Gen--Unknown Frame says "made in Austria" Serial number on frame has "US" suffix Barrell as ".40" stamped on top and the serial number followed by the Glock logo followed by a pentagon on the side. Trijicon Night sites installed, bought used this way, factory? 2 13 rd magazines stamped "Restricted LE/GOVT Only"

All standard markings. Do you have the original box? Is the label blue?

[Iguana]

MGF - G-30 - June 2008

[fiat_justicia]

Reference ERE:

Spoke with Glock this morning. Manufacture date was Mar 2004 according to their records, and pistol was not purchased/shipped by distributer until 10/07 which is why the fired casings show that date.

Tech believed the period of time between manufacture and purchase dates was most likely due to it being one with the optional ILS (internal locking system) selected. They show no record of it ever being sold or shipped prior to 10/07.

Not on frame "upgrade" list.

[sndstrm210]

All standard markings. Do you have the original box? Is the label blue?

I don't have the box or paperwork. Just the origional mags and loader.

[Dandapani]

Reference ERE:

Spoke with Glock this morning. Manufacture date was Mar 2004 according to their records, and pistol was not purchased/shipped by distributer until 10/07 which is why the fired casings show that date.

Tech believed the period of time between manufacture and purchase dates was most likely due to it being one with the optional ILS (internal locking system) selected. They show no record of it ever being sold or shipped prior to 10/07.

Not on frame "upgrade" list.

Thanks. Yet another mystery courtesy Glock. :patriot:

[Notrega]

G17 - HUYxxx
01/19/06 date on fired casing envelope

[Dizzy810]

G23
BNL*** - July 1995

[Lawdawg112]

FDS - G22 - April 2002 - 3rd Gen - LE order

[Dandapani]

FDS - G22 - April 2002 - 3rd Gen - LE order

April seems much earlier than it's peers. Did you get this date from Glock? They quote the manufactured date which is often much earlier than the test fired date.

FCM - G-22 - December 2002 - 3rd Gen.
FCP - G-23 - November 2002 - 3rd Gen.
FCS - G-26 - November 2002 - - White Label, standard plastic sights
FCT - G-27 - October 2002 - 2.5 Gen.
FCW - G-30 - November 2002
FDC - G-17 - September 2002 - 3rd Gen.
FDD - G-17 - December 2002 - 3rd Gen.
FDF - G-19 - December 2002 - 3rd Gen.
FDS - G-22 - April 2002 - 3rd Gen. - LE order

[poly glockahr]

DTT###US- G19- 12/00 Suffolk County NY PD Issue- 2.5 Generation (?) Pistol has 3rd. Generation finger groove and accessory rail frame, but does not have the second locking block pin in the frame.

[Dandapani]

DTT###US- G19- 12/00 Suffolk County NY PD Issue- 2.5 Generation (?) Pistol has 3rd. Generation finger groove and accessory rail frame, but does not have the second locking block pin in the frame.

No, just a 2 pin 3rd gen. Made for a short while before Glock standardized on the 3 pin for all frames.

2.5 gen is mainly the large frames with finger grooves and NO rails.

[ThePunishr]

I've spent an hour or so looking through this thread, but I can't find my answer. I just acquired a 2nd generation G19 and the serial number is AUFXXX. It looks like that number falls in the G17 range, no? Any ideas folks?

[fiat_justicia]

I've spent an hour or so looking through this thread, but I can't find my answer. I just acquired a 2nd generation G19 and the serial number is AUFXXX. It looks like that number falls in the G17 range, no? Any ideas folks?

The very first posts of this thread have a running list of all reported serial #s.
The closest to your AUF reported is AUH, also a G19.

AUH - G-19 - March 1994 - 2nd Gen.

[Dandapani]

I've spent an hour or so looking through this thread, but I can't find my answer. I just acquired a 2nd generation G19 and the serial number is AUFXXX. It looks like that number falls in the G17 range, no? Any ideas folks?

First, my thanks to Lazer for answering your questions. Yes, the first page has all the postings summarized so you don't have to read the entire thread. He answered as I would have about your AUF based on the info we have thus recorded. If you want an exact answer call Glock and post your results here so I can include it in the list for the next person who might have an AUF.

Second, the alpha prefix is not assigned to a particular model number. Plenty of examples of the same alpha prefix being assigned to different models, some with the same frame size, some with different frame sizes.

[sdfhpson]

EFZ - G22 - Unknown Date - 3rd Gen - No loaded chamber indicator - No Recall

[Dandapani]

EFZ - G22 - Unknown Date - 3rd Gen - No loaded chamber indicator - No Recall

I would put yours: June/July 2001

EFY - G-21 - June 2001
EFZ - G-22 - Unknown - 3rd Gen. - No loaded chamber indicator, No Recall
EGA - G-22 - Unknown - 3rd Gen. - ?
EGB - G-22 - Unknown - 3rd Gen.
EGC - G-22 - July 2001 - 3rd Gen.

[Notrega]

G17 - HUYxxx
01/19/06 date on fired casing envelope

Dandapani - is 01/06 about right??

[Dandapani]

Dandapani - is 01/06 about right??

HUX - G-17 - January 2006
HUY - G-17- January 2006
HUZ - G-17 - February 2006 - 3rd Gen.

I think that's about right, Notrega. Standard model. Surrounded by similar models. Dates seem coherent. But then again, this is Glock, who knows. :)

[ThePunishr]

Thanks Guys - I misunderstood the pattern, thinking anything in that range was a G17. :embarassed:

First, my thanks to Lazer for answering your questions. Yes, the first page has all the postings summarized so you don't have to read the entire thread. He answered as I would have about your AUF based on the info we have thus recorded. If you want an exact answer call Glock and post your results here so I can include it in the list for the next person who might have an AUF.

Second, the alpha prefix is not assigned to a particular model number. Plenty of examples of the same alpha prefix being assigned to different models, some with the same frame size, some with different frame sizes.

[Dandapani]

Thanks Guys - I misunderstood the pattern, thinking anything in that range was a G17. :embarassed:

NP. Not the first. And if you think we have the Glock serial numbers figured out, think again. Glock serial numbers are a riddle, wrapped in a mystery, inside an enigma; and we haven't found the key!

[James5m]

Here you go Dan

LHY G19 OD Green July 1 2008 Blue Label

[EdMan63]

MAK - G26 - 3rd Gen
Test fired 4/28/2008

[Dandapani]

Here you go Dan

LHY G19 OD Green July 1 2008 Blue Label

Nice. That makes 3, all with different test fired dates....

LHY - G-19 - September 2007 - 3rd Gen. - Blue Label, OD
LHY - G-19 - February 2008 - 3rd Gen. - OD
LHY - G-19 - July 2008 - - Blue Label, OD Green

[CamoRhino]

I may have missed it in the 115+ pages, but what year is "LYL"?

[mserr]

I may have missed it in the 115+ pages, but what year is "LYL"?

All of the posted prefixes are on the VERY first page of this thread so you don't have to go through 115 pages. No LYL prefix has been posted yet, but looks to be made march-april of this year, 2008.

[Dandapani]

All of the posted prefixes are on the VERY first page of this thread so you don't have to go through 115 pages. No LYL prefix has been posted yet, but looks to be made march-april of this year, 2008.

Thanks, mserr. I wonder why people are missing this. There is clearly a STOP READING AT THIS POINT post at the end of the serial numbers... This is the second one this week to "go through all 115 pages".

I'll tweak up the first post a bit...

[ProbyOne]

MBK - G-19- June 2008 - 3rd Gen.

[Fallguy173]

Thanks, mserr. I wonder why people are missing this. There is clearly a STOP READING AT THIS POINT post at the end of the serial numbers... This is the second one this week to "go through all 115 pages".

I'll tweak up the first post a bit...

Good thing I came on board when there were only 94 pages.:rofl:

[dcbrown]

MFY - G23 - June 2008 - 3rd Gen Purchased 7-12-08

[Dandapani]

MFY - G23 - June 2008 - 3rd Gen Purchased 7-12-08

Thanks. I already had an MFY but the date was unknown. I replaced it with yours! :patriot:

[CamoRhino]

Heck, I could not read 115 pages on my best of days...I thought everyone would know I was kidding...I clicked the l's category and did not see the LYL serial#'s listed.

[Dandapani]

Heck, I could not read 115 pages on my best of days...I thought everyone would know I was kidding...I clicked the l's category and did not see the LYL serial#'s listed.

Sorry. But your's was the "second" complaint this week so I just assumed... :whistling:

[CamoRhino]

No problem. I'm just happy that I finally got me a new G23 today!!! Can't wait to take it out shooting.

[LABMAN]

Glock 17, Red Label, Fired Case-06/09/08
MEX9xx Purchased today, 7/14/08

[3rdgen40]

CZS xxx = FEB 99

[Dandapani]

CZS xxx = FEB 99

What model is this? The 23 or the 27 in your sig?

[tankerfrank]

hope this help
G19 MFL688 june 16 2008 3rd Generation Red Label 2 mag

[Radiator]

Here's a redundant s/n, but with more info.

DAxxxUS-G17L-April 1988-First generation-One of the first 1000 G-17L's imported, (per Glock.) Has Austrian proof marks. Ported barrel, barrel test date, BTT= 4/88.

[jdcaples]

MFN - G-19 - 19 Jun 2008 - 3rd Gen. -


-Jon

PS: Dandapani, I'm editing this posting to keep the clutter down. Yes, I am proud to say it is my Glock 19. I live in Seattle, WA. Chris Dupree is the technician named on the envelope. Thank you, Dan!

[Dandapani]

MFN - G-19 - - 3rd Gen. -


-Jon

Jon, is this your Glock? Do you live outside Mass. and NY? Is there a little brown envelope containing two fired casings? What's the date on that envelope?

[tankerfrank]

I just bought a uesd Glock G30

FSG651 was July 2003

[Dandapani]

I just bought a uesd Glock G30

FSG651 was July 2003

Thank you. Yours replaces the one we had with an Unknown date! :patriot:

[BManoftheyear]

hey I just got my glock today and cannot find the serial number in the listing.
My serial # is cwv### it is a bone stock g17 that was rebuilt.It also has a number 7 stamped into the dust cover

[Dandapani]

hey I just got my glock today and cannot find the serial number in the listing.
My serial # is cwv### it is a bone stock g17 that was rebuilt.It also has a number 7 stamped into the dust cover

Call Glock to find out when it was first made, and then rebuilt.

It should be in this range for the original made-date:

CWW - G-19 - October 1998 - 3rd Gen.
CWX - G-19 - November 1998 - 3rd Gen.

[OgenRwot]

LNV - January 2008 G17L adjustable sights, 4.5lb trigger, extended mag release and slide stop. All came stock.

[freetrapper]

Picked up an older but nice G19 but can not match the #'s to date it. Starts out with ATL am I missimg something?

[DuckhunterInTN]

Hope this helps:

LYE - March 11, 2008, (according to fired case bag) - G27 - 2.5/3rd Generation (whichever you call the subcompacts) - standard sights

[DuckhunterInTN]

Another:

EYA - G31 - Unknown date - 3rd Generation - blue label (LEO) box

[Dandapani]

Picked up an older but nice G19 but can not match the #'s to date it. Starts out with ATL am I missimg something?

We aren't the source of info, you are. People submit their info and we record them. Can't find your's, then no one has submitted the info before now. Yours is the first!

1) Call Glock, ask them, report back to us.

2) My best guess based on the info we do have is: Dec, 1993.

ATA - G-24 - December 1993 - 2nd Gen. - First G-24
ATF - G-17 - January 1994 - 2nd Gen.
ATP - G-21 - December 1993

[sharp]

Here's one for you:

FWH***
G31C
8/30/2005

[check-six]

LAF - G-17 - May 2007 - 3rd Gen. Date taken from cartridge envelope, May 23/2007

Check-six

[freetrapper]

We aren't the source of info, you are. People submit their info and we record them. Can't find your's, then no one has submitted the info before now. Yours is the first!

1) Call Glock, ask them, report back to us.

2) My best guess based on the info we do have is: Dec, 1993.

ATA - G-24 - December 1993 - 2nd Gen. - First G-24
ATF - G-17 - January 1994 - 2nd Gen.
ATP - G-21 - December 1993

I'm sorry, I will check it out with Glock and report back.

[tackleberry65]

BES - G23 - JAN95 - 2nd gen - all numbers match - checked w/ glockmeister and glock usa

[dwb1987]

BTF - G-19 - Unkown - 2nd Gen. - bbl+frame match, slide does not and is refinished. factory refurb

[SF1911]

G30SF- MGExxx- June 2008

G27- MDLxxx- May 2008

[Dandapani]

BTF - G-19 - Unkown - 2nd Gen. - bbl+frame match, slide does not and is refinished. factory refurb

BTF - G-19 - February 1996 - 2nd Gen. - LE-only, engraved MPD Mag

[smittymojoe]

MGB - G-26 - 06/26/2008 - 3rd Gen. -
Born on date taken from envelope.

smitty :patriot:

[freakshow10mm]

I just got a gun in for a customer transfer. Glock 23, CKZ. 1st generation, no grooves, no rail. Didn't come with a fired case. Just the gun and mag in a US Mail box.

[Dandapani]

I just got a gun in for a customer transfer. Glock 23, CKZ. 1st generation, no grooves, no rail. Didn't come with a fired case. Just the gun and mag in a US Mail box.

2nd Gen. No 1st Gen. G-23's.

[freakshow10mm]

This is a CKZ, not a CKG. No finger grooves, no rail, barrel, frame, and slide SNs match.

http://img.photobucket.com/albums/v239/freakshow10mm/Glock/P7180050-1.jpg

http://img.photobucket.com/albums/v239/freakshow10mm/Glock/P7180049.jpg

[Dandapani]

This is a CKZ, not a CKG. No finger grooves, no rail, barrel, frame, and slide SNs match.


My bad. Should have had my coffee first. Fixed.

STILL, no Gen 1 G23's. :wavey:

CKY - G-22 - September 1997 - - factory night sights
CKZ - G-23 - Unknown - 2nd Gen.
CLA - G-23 - September 1997 - 2nd Gen.

[freakshow10mm]

Then why the 1st Gen frame configuration? Puzzling.

[Dandapani]

Then why the 1st Gen frame configuration? Puzzling.

It's not a 1st gen frame config. There is one more step. Look at the picture below (and in the first post).

http://img.photobucket.com/albums/0603/ButchG17/Glock%20pics/Glock_Generations.jpg

Do you see the difference between 1st and 2nd gen?

[freakshow10mm]

I get it now. I didn't know the frames were changed from the Glock-texture to checkering. I thought it was all the same stuff just the no grooves.

[Dandapani]

I get it now. I didn't know the frames were changed from the Glock-texture to checkering. I thought it was all the same stuff just the no grooves.

All part of Glock history. I have never handled a G17 Gen 1, myself. Thank goodness for Butch and his wonderful pictures. He has forgotten more about Glocks than I'll ever know. :rofl:

[Atrax]

LVT - G17C - purchased 2008-07 (Europe)

[GLOCK_27]

I got one fresh off the press. GLOCK 26 MKB***, test fired 7-09-2008

[Dandapani]

I got one fresh off the press. GLOCK 26 MKB***, test fired 7-09-2008

HIGHEST SERIAL NUMBER YET!!!

:yourock: :milestone: :number1:

:wave:

[GLOCK_27]

HIGHEST SERIAL NUMBER YET!!!

:yourock: :milestone: :number1:

:wave:

OHHHH YEAHHH I RULEE

[Apollo11]

MFM G19-June 2008 3rd Gen Std Rail

[freakshow10mm]

BDZ G23 unknown 2nd gen

[fattie]

g23 fge 412 , born feb 10th , 2003.

[NYStatePD]

G27-- Man
G30-- Mat

[Dandapani]

G27-- Man
G30-- Mat

MAK - G-26 - April 2008 - - Blue label
MAN - G-27 - Unknown
MAR - G-27 - April 2008 - 3rd Gen.
MAT - G-30 - Unknown
MAS - G-27 - April 2008

[CableRouter]

Glock 19, Serial MFP , Shell Collection Date: 06/27/08

[Ozmodiar]

LNX - G-19 - November 2007 - 3rd Gen. - Limited Gold Edition

As per the instructions:

* Born-on date, if known. If you’ve used Glock, Glockmeister, or another dating service, let us know its born-on date. If you have a newer Glock with the fired casings in an envelope, use the date on the envelope, as it’s always been accurate, compared to the dating services. If you live in a state where the dealer has to keep those/turn those i (MD, NY), ask him for the date, before he takes the envelope.

...I pulled the born-on date off the envelope with the casings

http://www.adfitzthum.com/lee/Glock/1Resize%20of%20DSC02764.jpg

http://www.adfitzthum.com/lee/Glock/1Resize%20of%20DSC02765.jpg

I've been lurking here for a little while, and I'm glad I can help solve one of the mysteries in this thread!

[NYStatePD]

MAK - G-26 - April 2008 - - Blue label
MAN - G-27 - Unknown
MAR - G-27 - April 2008 - 3rd Gen.
MAT - G-30 - Unknown
MAS - G-27 - April 2008


What does unknown mean?...Do I have bootleg Glocks? LOL---below is the fired shell from the G27 and the case label from my G30.

[Dandapani]

What does unknown mean?...Do I have bootleg Glocks? LOL---below is the fired shell from the G27 and the case label from my G30.

It means you didn't post the dates on your first post and I listed them as "unknown" dates and showed you were they fell in date wise, just as an FYI. Now that you submitted the one date, I will update the listing for it.

[rocky2103]

LXD - G-17 - March 2008 - 3rd Gen. - has Austrian markings

[Babysinister]

MGF - G-30 - June 2008 - 3rd Generation - Purchased on 07/26/2008. Austrian markings.

[chalk_32]

I noticed that the serial # prefix LNF was listed as 3rd gen red label. I just bought a new g32 LN******* LE package blue label with a test date of 1/25/08. Is it possible for a serial# batch to have to different label types?

[Dandapani]

I noticed that the serial # prefix LNF was listed as 3rd gen red label. I just bought a new g32 LN******* LE package blue label with a test date of 1/25/08. Is it possible for a serial# batch to have to different label types?

Yup. Nothing is cast in concrete when it comes to Alpha prefixes, models, calibers, even frame sizes.

[chalk_32]

Thanks.

[NYStatePD]

MAT---G30----test fired 3/6/2008

[joro]

LYP - G-32 - July 2008 - 3rd Gen. - Red Label, 2 standard 13 rd mags, standard sights, Austrian frame

[cannonballgsu]

LNX

Red Label on Box

Collection Date 11/26/2007

Purchased 2/5/2008


Joro, does that number mean something, or is it just that song by clutch? I've wondered since I heard it if it has significance

[joro]

As far as I know its just a song. The number has no real significance that I know of. If you do a search on the internet for it you will find alot of different theories as to the meaning of the numbers.

BTW, you might want to add a model number to your serial number info.:wavey:

[Dandapani]

LNX

Red Label on Box

Collection Date 11/26/2007

Purchased 2/5/2008


Joro, does that number mean something, or is it just that song by clutch? I've wondered since I heard it if it has significance

What model is this? This isn't the Gold Edition? What have a G-19 Gold Edition already listed. If yours is just a regular Glock, then post the model number and I'll list it as a duplicate alpha prefix.

[Johnson230]

G27 MCC Date on casing envolope is 6-30-08. Gun was bought on 7-27-08

[ahb]

MGY - G19 - 3rd Generation - Born on 7/15/08 Purchased on 8/3/08

[Ozmodiar]

What model is this? This isn't the Gold Edition? What have a G-19 Gold Edition already listed. If yours is just a regular Glock, then post the model number and I'll list it as a duplicate alpha prefix.

If it helps, I also had a red label on the case my Gold Edition came in.

[Aetaliano]

FRE - G-?? - Unknown - 3rd Gen. - Philippines, MARINER on slide

I recently acquired one in "Slightly Abused" condition :=). It's a GLOCK 23 chambered for .40 caliber. MARINER marking on the right side of slide, as indicated above.

[nawao]

MGK - G-21 - Purchased July 2008 - 3rd Gen. - 2 standard 13 rd mags, standard sights, Austrian frame.
<!-- / message --><!-- sig -->

[Dandapani]

MGK - G-21 - Purchased July 2008 - 3rd Gen. - 2 standard 13 rd mags, standard sights, Austrian frame.
<!-- / message --><!-- sig -->

Are you in USA?

Live outside of NY and MD?

Find a little brown envelope in your paper work that contains two fired casings?

What's the date on that evelope?

[ksokie]

CYX- G30- Dec 1998- Non-Rail

MKM- G30-July 2008- Glock Rail- Test fired on by birthday so this one will be a keeper forever. I thought that was pretty cool.

[Dandapani]

MKM- G30-July 2008- Glock Rail- Test fired on by birthday so this one will be a keeper forever. I thought that was pretty cool.

Highest serial number yet reported !!!

:number1: :patriot:

:wave:

[nawao]

Are you in USA?

Live outside of NY and MD?

Find a little brown envelope in your paper work that contains two fired casings?

What's the date on that evelope?

Living in Argentine - no envelope containing fired casings

[Dandapani]

Living in Argentine - no envelope containing fired casings

Thank you. I really appreciate non-USA Glock listings. I marked yours as from Argentine. :patriot:

[awcrooks]

I noticed that MEY for a G19 is already listed as year unknown and 2.5 gen. I purchased my G19 this past weekend with the MEY prefix. It was factory fired 6/2008 and it is obviously a 3rd gen.

[Dandapani]

I noticed that MEY for a G19 is already listed as year unknown and 2.5 gen. I purchased my G19 this past weekend with the MEY prefix. It was factory fired 6/2008 and it is obviously a 3rd gen.

Typo. You're right. I'll fix it. :patriot: Thanks.

[tggt05]

Model: GLOCK 27

SN: MAM ***

Test Fired: April 17th, 2008

[Glock30fan]

MN prefix is a 2nd gen G-17. Didn't call Glock to get date because I think they are tired of me calling...

[Dandapani]

MN prefix is a 2nd gen G-17. Didn't call Glock to get date because I think they are tired of me calling...

MK - G-19 - April 1990 - 2nd Gen.
MN - G-17 - Unknown - 2nd Gen.
MO - G-22 - Unknown - 2nd Gen.
MP - G-17 - April 1990 - 2nd Gen. - falls under 6 part firing pin upgrade
MR - G-17 - April 1990 - 2nd Gen.

[NYStatePD]

START_BLOCK
[b]
MAM - G-27 - April 2008
MAN - G-27 - Unknown
MAR - G-27 - April 2008 - 3rd Gen.
END_BLOCK

MAN--G27---test fired on 4/16/2008

[GotGlk10mm]

CYA - G-27 - Nov, 1998 - 2.5 Gen.

[smorin2]

LRX G19C July 2008 steel sights red label

[Carnage]

LPV - G-17 - April 2008 - 3rd Gen.

[Dandapani]

LPV - G-17 - April 2008 - 3rd Gen.

Nice. Perfect cut/paste entry! :patriot:

['19]

Dan,


LRX - G19C - July 2008 - 3rd Generation


"19 :wavey:

[Dandapani]

Dan,


LRX - G19C - July 2008 - 3rd Generation


"19 :wavey:

Thanks. Must be a recent run of 19C's. I got another one just the other day!

[cannonballgsu]

What model is this? This isn't the Gold Edition? What have a G-19 Gold Edition already listed. If yours is just a regular Glock, then post the model number and I'll list it as a duplicate alpha prefix.

Its not a gold ed.

Its just a regular G19...plain solid black, but i love it!

[Grenda_man]

MFB G-22 June 2008 3rd gen
Red Label, 2 X 15 rnd mags, cleaning rod

[RoninPPS]

G23; New; Generation 3; FTP; 9/29/2003


RoninPPS

[PCJim]

Please add to the date codes:

MEW G-17 test fired 6/6/08 3rd generation

[gentry]

LXN - G22 - 3rd gen

Test fired 3/6/2008, blue label on box

[Dandapani]

Please add to the date codes:

MEW G-17 test fired 6/6/08 3rd generation

Thanks for your contribution to the list. Technically, they are alpha prefix's, not date codes. :patriot:

[MTS532]

Please add "MHX" to the thread. Blue label G23. Test fired 07-30-2008.

[outlaw23]

tag!!!

[kahrcarrier]

G19

MHC prefix

Date collected: 8-05-08

[Dandapani]

tag!!!

You're it! :whistling:

[sirisaac]

MFS - G-20 - June 2008 - 3rd Gen. - Red Label, 2 X 15 rnd mags, Austria and Smyrna on frame

[Dandapani]

MFS - G-20 - June 2008 - 3rd Gen. - Red Label, 2 X 15 rnd mags, Austria and Smyrna on frame

This submission is: PERFECTION!

Exactly as needed for simple cut/paste into the database! Thanks! :patriot:

[sirisaac]

Thanks man, I try.:supergrin:

[Dandapani]

Thanks man, I try.:supergrin:

Your mother raised you right. Pay attention. Follow directions. :cool:

[Snapper2]

LAL , G20 , red label, test fire date 7-30-08.

[GJ1981]

AY G17 Sep 1986

[Dandapani]

LAL G20 red label 7-30-08

Is this the date on the little brown envelope that is with your paperwork? It contains two fired casings... :dunno:

[Snapper2]

Is this the date on the little brown envelope that is with your paperwork? It contains two fired casings... :dunno:

Yes, sorry.:embarassed:

[Dandapani]

Yes, sorry.:embarassed:

I had to ask since the test fired date is so far out of line with its "peers".

LAE - G-17 - April 2007
LAF - G-17 - May 2007 - 3rd Gen.
LAG - G-19 - April 2007 - 3rd Gen. - Austria marks, LCI
LAH - G-19 - April 2007 - 3rd Gen. - LE
LAK - G-19 - May 2007
LAL - G-20 - July 2008 - - red label
LAS - G-21SF - April 2007 - 3rd Gen. - Picatinny rail, red label
LAT - G-21SF - April 2007 - 3rd Gen. - pic rail/ambi mag rel. red label 2-13rd mags.LAU - G-33 - May 2007 - 3rd Gen, - 2 nine round magazines
LAV - G-23 - April 2007
LAW - G-23 - April 2007 - 3rd Gen. - Standard fixed sights
LAW - G-23 - April 2007 - 3rd Gen. - Blue Label Case 3 / 13 rd Mags
LAX - G-27 - April 2007 - 3rd Gen. - Blue Label, 4/17/07 (test fire date), first entry after "K" series, submitted by BigWaylon and predicted by GSD17
LAY - G-35 - May 2007 - - fixed sights, blue label, 3 mags
LAZ - G-36 - May 2007

[Snapper2]

I just double checked and it does say- date collected 7-30-08.

[Dandapani]

I just double checked and it does say- date collected 7-30-08.

:patriot:

['19]

<TABLE class=tborder id=post11043105 cellSpacing=0 cellPadding=6 width="100%" align=center border=0><TBODY><TR><TD class=thead style="BORDER-RIGHT: #8c735a 0px solid; BORDER-TOP: #8c735a 1px solid; FONT-WEIGHT: normal; BORDER-LEFT: #8c735a 1px solid; BORDER-BOTTOM: #8c735a 1px solid"><!-- / status icon and date --></TD><TD class=thead style="BORDER-RIGHT: #8c735a 1px solid; BORDER-TOP: #8c735a 1px solid; FONT-WEIGHT: normal; BORDER-LEFT: #8c735a 0px solid; BORDER-BOTTOM: #8c735a 1px solid" align=right>#2948 (http://glocktalk.com/forums/showpost.php?p=11043105&postcount=2948) </TD></TR><TR vAlign=top><TD class=alt2 style="BORDER-RIGHT: #8c735a 1px solid; BORDER-TOP: #8c735a 0px solid; BORDER-LEFT: #8c735a 1px solid; BORDER-BOTTOM: #8c735a 0px solid" width=175>'19 (http://glocktalk.com/forums/member.php?u=102982)
Registered User


Join Date: Aug 2008
Location: Minnesota









</TD><TD class=alt1 id=td_post_11043105 style="BORDER-RIGHT: #8c735a 1px solid"><!-- message -->Posted 08/10/2008 page 118, I believe you missed me. '19

Dan,


LRX - G19C - July 2008 - 3rd Generation


"19
<!-- / message -->






</TD></TR><TR><TD class=alt2 style="BORDER-RIGHT: #8c735a 1px solid; BORDER-TOP: #8c735a 0px solid; BORDER-LEFT: #8c735a 1px solid; BORDER-BOTTOM: #8c735a 1px solid"><!-- BEGIN TEMPLATE: postbit_onlinestatus --><!-- END TEMPLATE: postbit_onlinestatus --></TD><TD class=alt1 style="BORDER-RIGHT: #8c735a 1px solid; BORDER-TOP: #8c735a 0px solid; BORDER-LEFT: #8c735a 0px solid; BORDER-BOTTOM: #8c735a 1px solid" align=right><!-- controls -->http://glocktalk.com/forums/images/misc/progress.gif </TD></TR></TBODY></TABLE>

<!-- END TEMPLATE: spacer_open --><!-- this is not the last post shown on the page --><!-- BEGIN TEMPLATE: postbit_legacy --><TABLE class=tborder id=post11043294 cellSpacing=0 cellPadding=6 width="100%" align=center border=0><TBODY><TR><TD class=thead style="BORDER-RIGHT: #8c735a 0px solid; BORDER-TOP: #8c735a 1px solid; FONT-WEIGHT: normal; BORDER-LEFT: #8c735a 1px solid; BORDER-BOTTOM: #8c735a 1px solid"><!-- status icon and date -->http://glocktalk.com/forums/images/statusicon/post_old.gif 08-10-2008, 19:02 <!-- / status icon and date --></TD><TD class=thead style="BORDER-RIGHT: #8c735a 1px solid; BORDER-TOP: #8c735a 1px solid; FONT-WEIGHT: normal; BORDER-LEFT: #8c735a 0px solid; BORDER-BOTTOM: #8c735a 1px solid" align=right>#2949 (http://glocktalk.com/forums/showpost.php?p=11043294&postcount=2949) </TD></TR><TR vAlign=top><TD class=alt2 style="BORDER-RIGHT: #8c735a 1px solid; BORDER-TOP: #8c735a 0px solid; BORDER-LEFT: #8c735a 1px solid; BORDER-BOTTOM: #8c735a 0px solid" width=175>Dandapani (http://glocktalk.com/forums/member.php?u=32465)



Senior Member






Join Date: Mar 2004



Location: Gulf side Florida









http://glocktalk.com/images/GTContrib.gif











</TD><TD class=alt1 id=td_post_11043294 style="BORDER-RIGHT: #8c735a 1px solid"><!-- message --><!-- BEGIN TEMPLATE: bbcode_quote -->

<TABLE cellSpacing=0 cellPadding=6 width="100%" border=0><TBODY><TR><TD class=alt2 style="BORDER-RIGHT: 1px inset; BORDER-TOP: 1px inset; BORDER-LEFT: 1px inset; BORDER-BOTTOM: 1px inset">Originally Posted by '19 Dan,



LRX - G19C - July 2008 - 3rd Generation
"19 :wavey:



</TD></TR></TBODY></TABLE>
Thanks. Must be a recent run of 19C's. I got another one just the other day!
__________________
Dan
Karma -What goes around, comes around!
Florida Glockers, Wheelhouse, S&W #940




<!-- / sig -->










</TD></TR><TR><TD class=alt2 style="BORDER-RIGHT: #8c735a 1px solid; BORDER-TOP: #8c735a 0px solid; BORDER-LEFT: #8c735a 1px solid; BORDER-BOTTOM: #8c735a 1px solid"><!-- BEGIN TEMPLATE: postbit_onlinestatus --></TD><TD class=alt1 style="BORDER-RIGHT: #8c735a 1px solid; BORDER-TOP: #8c735a 0px solid; BORDER-LEFT: #8c735a 0px solid; BORDER-BOTTOM: #8c735a 1px solid" align=right><!-- controls --></TD></TR></TBODY></TABLE>

[Dandapani]

<TABLE class=tborder id=post11043105 cellSpacing=0 cellPadding=6 width="100%" align=center border=0><TBODY><TR><TD class=thead style="BORDER-RIGHT: #8c735a 0px solid; BORDER-TOP: #8c735a 1px solid; FONT-WEIGHT: normal; BORDER-LEFT: #8c735a 1px solid; BORDER-BOTTOM: #8c735a 1px solid"><!-- / status icon and date --></TD><TD class=thead style="BORDER-RIGHT: #8c735a 1px solid; BORDER-TOP: #8c735a 1px solid; FONT-WEIGHT: normal; BORDER-LEFT: #8c735a 0px solid; BORDER-BOTTOM: #8c735a 1px solid" align=right>#2948 (http://glocktalk.com/forums/showpost.php?p=11043105&postcount=2948) </TD></TR><TR vAlign=top><TD class=alt2 style="BORDER-RIGHT: #8c735a 1px solid; BORDER-TOP: #8c735a 0px solid; BORDER-LEFT: #8c735a 1px solid; BORDER-BOTTOM: #8c735a 0px solid" width=175>'19 (http://glocktalk.com/forums/member.php?u=102982)
Registered User


Join Date: Aug 2008
Location: Minnesota









</TD><TD class=alt1 id=td_post_11043105 style="BORDER-RIGHT: #8c735a 1px solid"><!-- message -->Posted 08/10/2008 page 118, I believe you missed me. '19

Dan,


LRX - G19C - July 2008 - 3rd Generation


"19
<!-- / message -->






</TD></TR><TR><TD class=alt2 style="BORDER-RIGHT: #8c735a 1px solid; BORDER-TOP: #8c735a 0px solid; BORDER-LEFT: #8c735a 1px solid; BORDER-BOTTOM: #8c735a 1px solid"><!-- BEGIN TEMPLATE: postbit_onlinestatus --><!-- END TEMPLATE: postbit_onlinestatus --></TD><TD class=alt1 style="BORDER-RIGHT: #8c735a 1px solid; BORDER-TOP: #8c735a 0px solid; BORDER-LEFT: #8c735a 0px solid; BORDER-BOTTOM: #8c735a 1px solid" align=right><!-- controls -->http://glocktalk.com/forums/images/misc/progress.gif </TD></TR></TBODY></TABLE>

<!-- END TEMPLATE: spacer_open --><!-- this is not the last post shown on the page --><!-- BEGIN TEMPLATE: postbit_legacy --><TABLE class=tborder id=post11043294 cellSpacing=0 cellPadding=6 width="100%" align=center border=0><TBODY><TR><TD class=thead style="BORDER-RIGHT: #8c735a 0px solid; BORDER-TOP: #8c735a 1px solid; FONT-WEIGHT: normal; BORDER-LEFT: #8c735a 1px solid; BORDER-BOTTOM: #8c735a 1px solid"><!-- status icon and date -->http://glocktalk.com/forums/images/statusicon/post_old.gif 08-10-2008, 19:02 <!-- / status icon and date --></TD><TD class=thead style="BORDER-RIGHT: #8c735a 1px solid; BORDER-TOP: #8c735a 1px solid; FONT-WEIGHT: normal; BORDER-LEFT: #8c735a 0px solid; BORDER-BOTTOM: #8c735a 1px solid" align=right>#2949 (http://glocktalk.com/forums/showpost.php?p=11043294&postcount=2949) </TD></TR><TR vAlign=top><TD class=alt2 style="BORDER-RIGHT: #8c735a 1px solid; BORDER-TOP: #8c735a 0px solid; BORDER-LEFT: #8c735a 1px solid; BORDER-BOTTOM: #8c735a 0px solid" width=175>Dandapani (http://glocktalk.com/forums/member.php?u=32465)



Senior Member






Join Date: Mar 2004



Location: Gulf side Florida









http://glocktalk.com/images/GTContrib.gif











</TD><TD class=alt1 id=td_post_11043294 style="BORDER-RIGHT: #8c735a 1px solid"><!-- message --><!-- BEGIN TEMPLATE: bbcode_quote -->

<TABLE cellSpacing=0 cellPadding=6 width="100%" border=0><TBODY><TR><TD class=alt2 style="BORDER-RIGHT: 1px inset; BORDER-TOP: 1px inset; BORDER-LEFT: 1px inset; BORDER-BOTTOM: 1px inset">Originally Posted by '19 Dan,



LRX - G19C - July 2008 - 3rd Generation
"19 :wavey:



</TD></TR></TBODY></TABLE>
Thanks. Must be a recent run of 19C's. I got another one just the other day!
__________________
Dan
Karma -What goes around, comes around!
Florida Glockers, Wheelhouse, S&W #940




<!-- / sig -->










</TD></TR><TR><TD class=alt2 style="BORDER-RIGHT: #8c735a 1px solid; BORDER-TOP: #8c735a 0px solid; BORDER-LEFT: #8c735a 1px solid; BORDER-BOTTOM: #8c735a 1px solid"><!-- BEGIN TEMPLATE: postbit_onlinestatus --></TD><TD class=alt1 style="BORDER-RIGHT: #8c735a 1px solid; BORDER-TOP: #8c735a 0px solid; BORDER-LEFT: #8c735a 0px solid; BORDER-BOTTOM: #8c735a 1px solid" align=right><!-- controls --></TD></TR></TBODY></TABLE>

Got it. Added 3rd Gen to the existing entry.

['19]

Dan,

Dated 8/10/2008, page 118

Just to keep you up to date the one you added to was from SMORIN2 further up on page 118, his is correct, he purchased a G19C - LRX, he is from Maine (the State that is).

I am '19 I also purchased a G19C but from Minnesota.

Please note there should be two (2) consecutive LRX G19C's. My number again is:

LRX - G19C - July 2008 - 3rd Gen. (Plastic sights)

Hope this helps your great project, its surely helped me
purchase my G19C.

'19 :patriot:

[ab4ka]

BVP-G17-Unknown date-2nd gen-s.n. on frame and box have "US" at the end, but the barrel and slide do not. It's in the original tupperware box, which states that it came with two 10rd magazines.

[glockerjeff23]

Mine is # MHT pack with the case in it says collected 7-7-08

[Dandapani]

Mine is # MHT pack with the case in it says collected 7-7-08

Your what? G-19? That's the most popular with citizens. LE prefer the 23 or 22. Which is yours? Can't list it without a model number.

[glockerjeff23]

It is a g23

[Coogan]

CCW - G-26 - Unknown - 2.5 Gen - Smooth finger grooves + cool prefix!

[Dandapani]

CCW - G-26 - Unknown - 2.5 Gen - Smooth finger grooves + cool prefix!

VERY COOL! :patriot:

[bronco1500]

MEP635 = 7-24-2008. G35 5.5 trigger blue label
LZY423 = 5-19-2008. G22 5.5 trigger blue label

[quinn1055]

MGG - G-30SF - July 2008 - 3rd Gen - 2 10 Round Mags, Fixed Sights, 5.5 lb Trigger, White Label.

[1glock]

LWV
Brass collected on 7-28-2008 / Purchased on 8-07-2008
G34 (3rd gen)
Fixed sight / 5lb. connector / extended slide stop / extended mag release / 2 hi-cap mags (Blue Label on case)

[WIG19]

Dan,
Ran across a recent trade-in G35 at the shop Saturday, SN: LFNxxx.
Didn't think to check the case for the envelope, but am assuming Jul 2007.
But LFN would be a G35 also.

:patriot:

[Dandapani]

Dan,
Ran across a recent trade-in G35 at the shop Saturday, SN: LFNxxx.
Didn't think to check the case for the envelope, but am assuming Jul 2007.
But LFN would be a G35 also.

:patriot:

Thanks, WIG! It's in good company:

LFM - G-34 - July 2007
LFN - G-35 - Unknown
LFP - G-35 - July 2007 - - Glock Sights

[DukeRyder]

When I had my Glock 22 I used this list to find it's year. Turns out my new one isn't on here :wow:

I just traded the 22 for a 17 (what I wanted in the first place) and the Pre-Fix on this is HU-9xx It has an Austrian Coat of Arms on the Barrel next to the SN and also on the Slide (my 22 did not have this) and a little NPv symbol too. Got no clue on the year....'[]

[Dandapani]

When I had my Glock 22 I used this list to find it's year. Turns out my new one isn't on here :wow:

I just traded the 22 for a 17 (what I wanted in the first place) and the Pre-Fix on this is HU-9xx It has an Austrian Coat of Arms on the Barrel next to the SN and also on the Slide (my 22 did not have this) and a little NPv symbol too. Got no clue on the year....'[]

Look on the barrel (chamber hood area) for 3 alphabetic letters. That's the barrel proof date code.

[DukeRyder]

Look on the barrel (chamber hood area) for 3 alphabetic letters. That's the barrel proof date code.

CTD October 1989. cool :cool:

[ab4ka]

GGN-G27-unknown date-3rd gen-clamshell box, white label stating "2 commercial mags"

[ab4ka]

HGX-G20-unknown-3rd gen

I see the page currently has HGX listed as a G19, but I'm sitting here looking at it on my G20. Would they use the same prefix for different models?

[Dandapani]

HGX-G20-unknown-3rd gen

I see the page currently has HGX listed as a G19, but I'm sitting here looking at it on my G20. Would they use the same prefix for different models?

Yes, they do. There are plenty of examples in the database here.

[t1tan]

LXM - G-19 - 03-03-08 - 3rd Gen - Red Label Clam-Shell Case, 5.5lb, FXD, 2-15rnd

[uh1]

just pickup my first G19 last week with ser# MGZXXX. Date collected on the shell 23 July 08

[Captains1911]

LWK - G-23 - 3rd Generation - purchased new in April 2008

[Dandapani]

LWK - G-23 - 3rd Generation - purchased new in April 2008

:wavey: did you look in your paperwork that came with your new Glock? There should be a small manilla brown envelope containing two fired casings. What's the date on that envelope?

[TheHighwayman]

G22 - BNH - Unknown
G23 - BBU - October '94 (per your own listing)
G27 - CXZ - Unknown

[GOOFA]

MEPxxx...G34... Blue Label...5.5 lb... fixed sights... 8/20/08

[220IAM]

g17C LNWxxx date collected 7/9/08

[MTS532]

MKC series G26 blue label. Date collected 07-14-2008.

[MCPO]

MBY - G-26 - April 2008 - 3rd Gen. - White Label, 2 X 10 rnd mags, Austria and Smyrna on frame

[Dandapani]

MBY - G-26 - April 2008 - 3rd Gen. - White Label, 2 X 10 rnd mags, Austria and Smyrna on frame

Perfect submission. Simple cut/paste into the database! Thanks! :patriot: