Glock Serial Number Research Project (New)

[hrygeek]

Originally posted by dmobrien2001
Is your G22 broken? Probably not. Just wait until it breaks and Glock will fix it. Most owners with a broken rail don't even know it until they find it during a cleaning session AFTER a successful range session. Very few actually break.

Thanks for the recall confirmation. I added your entry.

I'm new and have utilized the search feature but what are the reprocussions of not having it fixed? Just a broken frame rail? I told them to order a new one does that mean I have to send it back now? TIA.

[Dandapani]

Originally posted by hrygeek
I'm new and have utilized the search feature but what are the reprocussions of not having it fixed? Just a broken frame rail? I told them to order a new one does that mean I have to send it back now? TIA.

A small percentage of those in the "recall" range may suffer a broken rear rail. Most owners report not even noticing it, i.e., no stoppage. I believe one owner reported the broken rail part cause some kind of trigger failure. None report a catastrophic failure with a broken rail. These are my rememberances of posts here.

If you asked them to order you a new frame, wait until they call you and then you send it in. They will go through the entire pistol and update/fix any parts and problems. Be sure to send along any mags that you think might require updating.

[hrygeek]

For the record, looked at my "born" on date for the test rounds. 12.7.2001

[Stanley2]

KPR - G-25 - n/a - 3rd gen - Mexico .380ACP Purchased New Dec. 05 2006 Mexico City

This one is a friend gun and the serial number is 5 numbers above mine

[sandhiller]

KUM - G35 - 1-16-07 (test fired) - loaded chamber indicator extractor - 3rd frame pin

[Dandapani]

Originally posted by Stanley2
KPR - G-25 - n/a - 3rd gen - Mexico .380ACP Purchased New Dec. 05 2006 Mexico City

This one is a friend gun and the serial number is 5 numbers above mine

Thanks for posting this. Good to see active Glock ownership in Mexico. Muchas Gracias.

[JonB_G20C]

G20C Gen 3 DAPxxxx Sept 2000 according to TopGlock utility

[jpshaw]

Glock 27 Generation 2.5 (finger groves but smooth front on them) Flat extractor (no LRI) and older dull finish.

Edited to include 7/1/1997 from Topglock. I forgot to include the date and prefix initially. Prefix is CKC.

[sam815]

G34 3rd Gen Extractor Indicator

S/N: KLPXXX

Purchased New 2/27/07

Casing Envelope dated 2/20/07

Any idea when mfg.

[Dandapani]

Originally posted by jpshaw
Glock 27 Generation 2.5 (finger groves but smooth front on them) Flat extractor (no LRI) and older dull finish.

Alpha prefix? Cartridge collection envelope date or date from TG or Glock? Thanks!

[Dandapani]

Originally posted by sam815
G34 3rd Gen Extractor Indicator

S/N: KLPXXX

Purchased New 2/27/07

Casing Envelope dated 2/20/07

Any idea when mfg.

This is the best date we can get:
Casing Envelope dated 2/20/07

[DepDuke]

Hmmm

How about

BLLxxxUS?

G17

Second Gen (checkering, but no finger grooves)

[Dandapani]

Originally posted by DepDuke
Hmmm

How about

BLLxxxUS?

G17

Second Gen (checkering, but no finger grooves)

Dated by TopGlock

BLL - G-17 - June 1995 - 2nd Gen.

[DepDuke]

Very cool.....thanks

[jpshaw]

Glock 27 Generation 2.5 (finger groves but smooth front on them) Flat extractor (no LRI) and older dull finish.

Prefix is CKC and date is 7/1/1997 from Topglock.

[ShockWaves]

i have a g23 KNG XXX homeland defender model???
any info?

[Dandapani]

Originally posted by ShockWaves
i have a g23 KNG XXX homeland defender model???
any info?

Why don't you have any info? This is a fairly new firearm. Check the paperwork. Look for the little brown envelope containing two fired cartridge casings. What's the date on the envelope?

We have one with a close alpha prefix that is also a homeland defender model:
KNF - G-19 - November 2006 - - LCI, "Homeland Defender"

[SGT67]

G 23 purchased used , serial# FGFxxx 3rd gen with rail and LCI extractor. test fired date 02/12/03. Didnt see this one on the list unless I missed it. not sure if a recall frame or not.

[SPIDERWEBS]

I went to register my Glock 26 and find there is no Alpha numbers beginning with KKF. My pistol is KKF048.Maybe it's newer than I thought!

SPIDERWEBS

[Dandapani]

Originally posted by SGT67
G 23 purchased used , serial# FGFxxx 3rd gen with rail and LCI extractor. test fired date 02/12/03. Didnt see this one on the list unless I missed it. not sure if a recall frame or not.

"Fxx" not in frame recall range. Only some of the "Exx" ones.

[Dandapani]

Originally posted by SPIDERWEBS
I went to register my Glock 26 and find there is no Alpha numbers beginning with KKF. My pistol is KKF048.Maybe it's newer than I thought!

SPIDERWEBS

Check your paperwork. You should have a little brown envelope containing two fired cartridge casings. What's the date on that envelope?

[Quarterbore]

I spotted this posted over at AR15.com (http://www.ar15.com/forums/topic.html?b=7&f=88&t=421156):

DVY

Glock 17, 3rd Generation with 2-PINS

No Date is available

[Dandapani]

Originally posted by Quarterbore
I spotted this posted over at AR15.com (http://www.ar15.com/forums/topic.html?b=7&f=88&t=421156):

DVY

Glock 17, 3rd Generation with 2-PINS

No Date is available

Date per TG:

DVY - G-17 - September 2000 - 3rd Gen. - 2 pins

[GOOFA]

I purchased my new G19 on 2/23/07, the envelope said 2/13/2007 collected date.

KVP G19 3rd Gen

[GSD17]

BSE - G18C - Unknown - 3rd Gen - NO LCI

Pictures in GG that Lunde took.

Edited: I believe I got his first name wrong

[Dandapani]

Originally posted by GSD17
BSE - G18C - Unknown - 3rd Gen - NO LCI

Pictures in GG that Kevin Lunde took.

We had a BSE G18 in the list. Funny that TG can't date them. Must not have come through Smyrna's books.

[Tired]

Just got it today. G35 KUMxxx 02-07-07

[cs133atom]

KLL - G23C - 15/NOV/2006

I haven't seen any KLLs yet!

Craig

[GSD17]

Originally posted by dmobrien2001
We had a BSE G18 in the list. Funny that TG can't date them. Must not have come through Smyrna's books.

I know there is already one on the list. The one pictured is ported, but doesn't have the "C" on the slide.

Also, the one you have listed is a 2nd Gen, the one I saw pictured is a 3rd Gen.

[Stanley2]

I got some more of Glocks in the club here they are:

FEG - G-25 - n/a - ??gen - Mexico .380ACP Purchased New April 24 2003 Mexico City

FEG - G-25 - n/a - ??gen - Mexico .380ACP Purchased New July 18 2003 Mexico City

GFK - G-25 - n/a - ??gen - Mexico .380ACP Purchased New May 25 2005 Mexico City

HMB - G-25 - n/a - ??gen - Mexico .380ACP Purchased New December 16 2005 Mexico City

HWH - G-25 - n/a - 3rd gen - Mexico .380ACP Purchased New March 18 2006 Mexico City

HWH - G-25 - n/a - 3rd gen - Mexico .380ACP Purchased New May 20 2006 Mexico City

[Dandapani]

Originally posted by GSD17
I know there is already one on the list. The one pictured is ported, but doesn't have the "C" on the slide.

Also, the one you have listed is a 2nd Gen, the one I saw pictured is a 3rd Gen.

That's pretty cool. Glock reserved an alpha prefix for G18's across the two Generations...

[Dandapani]

Originally posted by Stanley2
I got some more of Glocks in the club here they are:

FEG - G-25 - n/a - ??gen - Mexico .380ACP Purchased New April 24 2003 Mexico City
FEG - G-25 - n/a - ??gen - Mexico .380ACP Purchased New July 18 2003 Mexico City
GFK - G-25 - n/a - ??gen - Mexico .380ACP Purchased New May 25 2005 Mexico City
HMB - G-25 - n/a - ??gen - Mexico .380ACP Purchased New December 16 2005 Mexico City
HWH - G-25 - n/a - 3rd gen - Mexico .380ACP Purchased New March 18 2006 Mexico City
HWH - G-25 - n/a - 3rd gen - Mexico .380ACP Purchased New May 20 2006 Mexico City

We had the FEG's and the GFK, but not the H's. Thanks!

[GSD17]

Originally posted by dmobrien2001
That's pretty cool. Glock reserved an alpha prefix for G18's across the two Generations...

Yeah, I guess kind of how they did the cutaways, and P and R models.

Thinking about it...

I have shot a G18C before, back before I was big into GLOCKs..

I can't recall if it was a 1st or a 2nd Gen, but I know it wasn't a 3rd. I recall distinctly that it had the "C" on the slide.

The one in Lunde's pics is a compensated version, but lacks the "C"

I wonder if GLOCK dropped the un-ported versions, and all G18s are now ported.

Also, I noticed that there are no "G17T" (blue frame) GLOCKs on the list (at least not that I saw).

Another pic of lunde's that I saw, was a G17T (it is in GNG right now) the serial prefix is simply "T" with #s to follow. How ya gonna list that?

[Dandapani]

Originally posted by GSD17
Another pic of lunde's that I saw, was a G17T (it is in GNG right now) the serial prefix is simply "T" with #s to follow. How ya gonna list that?

Dunno. Report it and I'll figure it out. LOL.

[DDMan]

I noticed mine doesnt have a date on it, so I thought I would contribute and add one!

GGL - G-23 - June 2004 - 3rd Gen. - LCI, 2-10rd Mags


Date from the envelope with the two test-fire rounds dated 6/22/04, and was purchased in January 2005.

Great thing about my gun is the serial is SO easy to remember. GGL reminds me of Gaston Glock, and the 3 numbers are a very popular gun caliber.

[Dandapani]

Originally posted by DDMan
I noticed mine doesnt have a date on it, so I thought I would contribute and add one!

GGL - G-23 - June 2004 - 3rd Gen. - Non-LCI, 2-10rd Mags


Date from the envelope with the two test-fire rounds dated 6/22/04, and was purchased in January 2005.

Great thing about my gun is the serial is SO easy to remember. GGL reminds me of Gaston Glock, and the 3 numbers are a very popular gun caliber.

Thanks for updating an incomplete entry. Curious. Yours is non-LCI, the one that was in the GSN said LCI. I used yours as the authoritative entry. :thumbsup:

[DDMan]

Originally posted by dmobrien2001
Thanks for updating an incomplete entry. Curious. Yours is non-LCI, the one that was in the GSN said LCI. I used yours as the authoritative entry. :thumbsup:

Haha, thanks. Admittedly, I don't know what the LCI looks like, but when a round is chambered there are no red dots or levers that stick out, and the gun looks the same as it does when its empty. So I just assume I don't have the LCI.



EDIT: I DO have the LCI. I just never noticed it. Its not anything obvious, all it does it stick the extractor out of the slide by like 2mm. :upeyes:

[Dandapani]

Originally posted by DDMan
Haha, thanks. Admittedly, I don't know what the LCI looks like, but when a round is chambered there are no red dots or levers that stick out, and the gun looks the same as it does when its empty. So I just assume I don't have the LCI.



EDIT: I DO have the LCI. I just never noticed it. Its not anything obvious, all it does it stick the extractor out of the slide by like 2mm. :upeyes:

:rofl: :rofl: :rofl: :rofl: :rofl:











j/k :tongueout: :rofl: :rofl: :rofl:

[Suburban]

FCS - G-26 - ? - 3rd Gen - LCI, 9mm4 followers, carry case with white label not black tupperware box, serial number suffix is "US", 3-pin frame, finger grooves with checking between, no light rail obviously, no born-on date found from topglock, bought new in 2003, I'll check for the shell casing envelope and update if necessary

[GSD17]

Originally posted by dmobrien2001
Dunno. Report it and I'll figure it out. LOL.

Dunno the date or anything, only what I saw in the pics...

Either way.. this is one of the pics... he has photoshopped out the last 2 #s on the end of the serial #... but as you can see, only one letter, a "T"

http://i46.photobucket.com/albums/f119/KI4FKW/G17Tblowback.jpg

http://i46.photobucket.com/albums/f119/KI4FKW/G17Tright.jpg

[DDMan]

Originally posted by GSD17
Dunno the date or anything, only what I saw in the pics...

Either way.. this is one of the pics... he has photoshopped out the last 2 #s on the end of the serial #... but as you can see, only one letter, a "T"


Thats pretty sick. I'm guessing the "T" stands for "Training" and it uses 9mm Simunitions?

[Dandapani]

Originally posted by GSD17
Dunno the date or anything, only what I saw in the pics...

Either way.. this is one of the pics... he has photoshopped out the last 2 #s on the end of the serial #... but as you can see, only one letter, a "T"

There are a few "special" Alpha Prefix numbers in the first post on the first page. There is a "G0xxx" so I posted it after that as:

T105XX - G-17T - Unknown - 3rd Gen. - Blue trainer, uses 9mm FX ammo, found in a photo by Lunde

[lionelhutz]

ANN - G19 - September 1993 - 2nd Generation

[Jeff82]

Originally posted by DDMan
Haha, thanks. Admittedly, I don't know what the LCI looks like, but when a round is chambered there are no red dots or levers that stick out, and the gun looks the same as it does when its empty. So I just assume I don't have the LCI.



EDIT: I DO have the LCI. I just never noticed it. Its not anything obvious, all it does it stick the extractor out of the slide by like 2mm. :upeyes:

"Doctor, doctor, I don't know what to do! Every time I drink coffee I get a sharp pain in my eye!"

"Have you tried taking the spoon out of the cup before you drink?"

:tongueout:

[SARDG]

KTA - G-30 - FEB 2007 - Date fm envelope: Feb 27/2007

SARDoG

[Dandapani]

Originally posted by lionelhutz
ANN - G19 - September 1993 - 2nd Generation

Her name is "ANN"! :thumbsup:

[klt1986]

KUC - G-23 - 02/2007(envelope says 02/05/2007) Blue Label

[El Duderino]

OD Green G19

serial # KNPxxx

Dated Feb 15 2007

<img src=http://glocktalk.com/attachment.php?s=&postid=7847713>

[Glock19xdsc]

I didn't see this prefix on the list, so here's what info I have:

AGZxxxUS - 3/1/1993-TopGlock - Second Generation G19 - no LCI

[VirginiaLEO83]

HSU G19 3rd Gen, Blue Label, LEO. AUSTRIA on slide, Made in Austria on slide.

Dec 19, 2005 on fired casing envelope

[ANeat]

KTM*** G17 fired case date 2-26-07

[Skers95]

KMExxx - Oct04/2006

EDIT: G22

[Dandapani]

Originally posted by Skers95
KMExxx - Oct04/2006

What model is this?

[Stanley2]

DCL - G-25 - n/a - 3rd gen - Mexico .380ACP Purchased New July 19 1999 Mexico City

HAU - G-25 - n/a - 3rd gen - Mexico .380ACP Purchased New May 13 2006 Mexico City

[Dandapani]

Originally posted by Stanley2
DCL - G-25 - n/a - 3rd gen - Mexico .380ACP Purchased New July 19 1999 Mexico City

HAU - G-25 - n/a - 3rd gen - Mexico .380ACP Purchased New May 13 2006 Mexico City

Muchas gracias!

[snolden]

BZB Glock 27 Aug 96 Finger Grips I guess that makes it 2nd or 3rd gen

[Skers95]

Originally posted by dmobrien2001
What model is this?

Shoot, sorry, G22.

[Dandapani]

Originally posted by snolden
BZB Glock 27 Aug 96 Finger Grips I guess that makes it 2nd or 3rd gen

According to Butch, all sub-compacts are 3rd gen since they first came out during that period when only 3rd gens were being made, but many prefer to call them 2.5 gen (finger grooves, no rail).

[jpshaw]

According to Butch, all sub-compacts are 3rd gen since they first came out during that period when only 3rd gens were being made, but many prefer to call them 2.5 gen (finger grooves, no rail).

I posted a CKC G27 calling it a Gen 2.5 since it had finger grooves that were smooth in the front. Never saw a sub-compact with a rail.

[Dandapani]

Originally posted by jpshaw
I posted a CKC G27 calling it a Gen 2.5 since it had finger grooves that were smooth in the front. Never saw a sub-compact with a rail.

Smooth vs checked grooves is a minor variation, not a full generation. Nope. No sub-compacts with rails. The G36 and G29 aren't true sub-compacts and do have rails these days.

[jpshaw]

Smooth vs checked grooves is a minor variation, not a full generation.

I will stand corrected on that. I heard that when they first came out so thats what I was calling them. I liked the smooth better.

[lfd1]

KFC-G22C-July 2006

[Dandapani]

Originally posted by lfd1
KFC-G22C-July 2006

KFC!!!

That's a keeper!

http://money.cnn.com/2005/11/07/news/fortune500/birdflu_plans/kfc_kentuckyfriedchicken.03.gif

Thanks for posting a "C" model. We don't get many listed!

[Disintegr8or]

FVX
g19
11-10-2003

It has the number 1 and a pentagon on the barrel? What does that mean?

[Dandapani]

Originally posted by Disintegr8or
FVX
g19
11-10-2003

It has the number 1 and a pentagon on the barrel? What does that mean?

The "1" on G19's indicate the new barrel geometry to lower the chamber in relationship to the magazine follower to better feed certain JHP ammo used by the NYPD...

Pentagon? Proof mark? Anyone else?

[RetailNinja]

Just got my new, used, Glock model 17!

It is DVY-611 Model 17. The list mentions this as a 'two pin' gun however my model is a single pin over the trigger. It is also a dull finish, not like my old G35.

The frame says US after the number, but the slide and the barrel are just straight DVY611 so I'm assuming this gun's frame was made in the US, and the slide and barrel were not?

[Dandapani]

Originally posted by RetailNinja
Just got my new, used, Glock model 17!

It is DVY-611 Model 17. The list mentions this as a 'two pin' gun however my model is a single pin over the trigger. It is also a dull finish, not like my old G35.

The frame says US after the number, but the slide and the barrel are just straight DVY611 so I'm assuming this gun's frame was made in the US, and the slide and barrel were not?

1) Two pins: trigger pin and rear frame pin (holds firing mechanism in frame -- true Glockaholics will correct my terminology... :) )

Three pin guns have the extra locking block pin above the trigger pin.

2) "US" was a Glock fad dropped after a fashion. And no, the frame wasn't made in the USA. That didn't start happening until very recently. The "US" was just stamped on the serial number plate.

[RetailNinja]

Originally posted by dmobrien2001
1) Two pins: trigger pin and rear frame pin
ah, that makes sense. In that case everything is cool!

[Levan]

purchaised NIB Glock 17 3 rd generation starts with GLT. any idea when it was manufactured.

gun was imported from austria

[Dandapani]

Originally posted by Levan
purchaised NIB Glock 17 3 rd generation starts with GLT. any idea when it was manufactured.

gun was imported from austria

Are you in the Netherlands? Looks like we had one from there before.

Hard to say exactly. Seems to be some jitter around those serial numbers. My guess is something around Sept/Oct 2004.

GKW - G-21 - September 2004
GLC - G-23 - August 2004
GLC - G-23 - July 2004
GLE - G-26 - Unknown
GLF - G-26 - November 2004
GLL - G-30 - July 2004 - 2.5 Gen. - OD
GLM - G-36 - July 2004 - - OD frame. LCI
GLT - G-17 - Unknown - 3rd Gen. - LCI, three pin, adjustable rear sight, new style box, 2 17rd mags. purchased NIB October 2006 in Arnhem, The Netherlands
GMR - G-19 - October 2004 - 3rd Gen. LCI, No US in Ser. number, imported 8/25/04

[Levan]

Originally posted by dmobrien2001
Are you in the Netherlands? Looks like we had one from there before.

Hard to say exactly. Seems to be some jitter around those serial numbers. My guess is something around Sept/Oct 2004.

Thanx, I saw this section.

No I am not from Netherlands. I am from georgia (not that georgia in south part of USA) another Georgia in Caucasus.

[Dandapani]

Originally posted by Levan
Thanx, I saw this section.

No I am not from Netherlands. I am from georgia (not that georgia in south part of USA) another Georgia in Caucasus.

HERE? (http://www.1911encyclopedia.org/Tiflis,_Transcaucasia_(Capital))

[BustedFlush]

Originally posted by dmobrien2001
That's pretty cool. Glock reserved an alpha prefix for G18's across the two Generations... I was just reading a few pages on the thread and saw this. That is pretty interesting that BSE spans 2nd and 3rd generation in the 18.

It also caught my I because I was certain I had a serial number BSE gun.


I checked and I do! It's a Smith and Wesson revolver!

:animlol:

[CLee0507]

CWR - G-30 - October 1998 - 3rd. Gen. - US in serial

[wp42077]

KEV - G19 - 7/06

[Tackleberry40sw]

My Glock model 22 has a serial #FDR9XX. I can not seem to find the date of manufacture for it. Can anyone shed any light on this to help? Thanks in advance.

[Dandapani]

Originally posted by Tackleberry40sw
My Glock model 22 has a serial #FDR9XX. I can not seem to find the date of manufacture for it. Can anyone shed any light on this to help? Thanks in advance.

1) Check your paperwork for the little brown envelope containing two collected cartridge casings. What's the date on the envelope?

2) Call Glock in Smyrna. Heck, just drive over to their office and ask them. :tongueout:

3) From our GSN thread data:
FDD - G-17 - December 2002 - 3rd Gen.
FDF - G-19 - December 2002 - 3rd Gen.
FDG - G-19 - Unknown - 3rd Gen. - has LCI, also has "1" after "Glock" visable through chamber.
FDH - G-20C - January 2003 - 3rd Gen.
FDK - G-21 - March 2003
FDP - G-22 - Unknown - 3rd Gen.
FDW - G-29 - March 2003 - 2.5 Gen. - “Glock Austria 29 10mm Auto.”
FDX - G-26 - December 2002 - 3rd Gen.
FDZ - G-27 - 2002 - 2.5 Gen.
FEA - G-27 - December 2002 - 2.5 Gen.
FEB - G-32 - December 2002 - 3rd Gen.

There's a lot of jitter, especially with the "C" model. The "average" date is December 2002. That's my guess.

[sparky241]

dta- g23 - 6/2001- 3rd generation 200rds andonly one fte great gun.addictive

[Dandapani]

Originally posted by sparky241
dta- g23 - 6/2001- 3rd generation 200rds andonly one fte great gun.addictive

2001? Not 2000? I recorded it as you posted, but the date is about a year out of line with the sequence.

DSX - G-22 - May 2000 - 3rd Gen.
DSZ - G-23 - May 2000 - 3rd Gen.
DTA - G-23 - June 2001 - 3rd Gen.
DTB - G-23C - Unknown - 3rd Gen.
DTB - G-32 - May 2000
DTD - G-27 - May 2000 - 2.5 Gen.
DTF - G-30 - May 2000 - 3rd Gen.
DTH - G-36 - June 2000 - 3rd Gen.

[GSD17]

Gotcha another one to add.

Quick background, add what you wish.

Gun was originally sold to the Carroll County, GA Sheriff's Office.
Came with TNS and an 8lb connector. Slide still has ".40 S&W".

BZN - G22 - unknown - 2nd Gen

[Dandapani]

Originally posted by GSD17
Gotcha another one to add.

Quick background, add what you wish.

Gun was originally sold to the Carroll County, GA Sheriff's Office.
Came with TNS and an 8lb connector. Slide still has ".40 S&W".

BZN - G22 - unknown - 2nd Gen

TG dates it: 9/1/1996

I'm always happy to record LEO Glock info. :thumbsup:

BZN - G-22 - September 1996 - 2nd Gen. - Originally sold to the Carroll Co., GA SO, TNS, 8lb connector, slide has ".40 S&W"

[GSD17]

Originally posted by dmobrien2001
TG dates it: 9/1/1996

I'm always happy to record LEO Glock info. :thumbsup:

Just FYI it is still in LE.

It was sold when the S.O. went to the 3rd Gens. Sold to a LEO that works for my agency, and then sold to another LEO at my agency. I detail stripped it for him, swapped him in a 5.5lb connector, and cleaned it. It was horrible, I don't think it had ever been cleaned, firing pin would barely move at all with the trigger pulled. Either way, it is still in a holster, protectin' and servin' :thumbsup:

[picrthis]

Originally posted by dmobrien2001
Smooth vs checked grooves is a minor variation, not a full generation. Nope. No sub-compacts with rails. The G36 and G29 aren't true sub-compacts and do have rails these days.

G30 = sub-compact - has rails.

[Dandapani]

Originally posted by picrthis
G30 = sub-compact - has rails.

Ya, keep trying to convince yourself the G29 and G30 are true-subcompacts.... Glock can call them that if they want, but they aren't. More like compact sized.

Why else is there room for rails. :rofl:

ETA: the only true Glock subcompacts are G26, 27, 33, and 28 and 39.

[picrthis]

Originally posted by dmobrien2001
Ya, keep trying to convince yourself the G29 and G30 are true-subcompacts.... Glock can call them that if they want, but they aren't. More like compact sized.

Why else is there room for rails. :rofl:

ETA: the only true Glock subcompacts are G26, 27, 33, and 28 and 39.

Take a G27 on lay it on top of a G30, you'll be surprised; I've got both of them. YES the G30 IS a subcompact, I think GLOCK knows more about Guns than both you & I.

If it looks like a subcompact, lays like a subcompact, shoots like a subcompact........it must be a subcompact.

Seeing is believe, and I do believe in GLOCK. :thumbsup:

[Dandapani]

Originally posted by picrthis
Take a G27 on lay it on top of a G30, you'll be surprised; I've got both of them. YES the G30 IS a subcompact, I think GLOCK knows more about Guns than both you & I.

If it looks like a subcompact, lays like a subcompact, shoots like a subcompact........it must be a subcompact.

Seeing is believe, and I do believe in GLOCK. :thumbsup:

On all the true subcompacts, you can swap slides. <- period.

[picrthis]

Originally posted by dmobrien2001
On all the true subcompacts, you can swap slides. <- period.

I never knew the definition of a subcompact is all slides must be swappable amongst any model and all models. You are truely making this up as you go along....good luck with that,PERIOD.

While I enjoy my G30 SUBCOMPACT. :rofl:

[Dandapani]

Originally posted by picrthis
I never knew the definition of a subcompact is all slides must be swappable amongst any model and all models. You are truely making this up as you go along....good luck with that,PERIOD.

While I enjoy my G30 SUBCOMPACT. :rofl:

Clearly you missed the point that all true subcompact frames are the same, cast from the same mold. The G30 and G29 are "different". But you can go on in ignorance... Don't worry, be happy.

[Butch]

Glock does indeed consider the G29/G30 guns to be subcompacts, but considering that there is no 'compact' sized .45 acp Glock and that the G29/30 are about the same size as the G19/23 guns, I'd have to agree that the matter could be considered to be 'open to interpretation' and a matter of opinion.

If you really want a small .45, I'd point you towards a G39!



:patriot:

[vermeire]

Updates to # already listed.

GLL G30, April 21, 2006 on casing envelope. Purchased new 3/24/2007. 3rd Gen, OD Frame, no rails.

[Dandapani]

Originally posted by vermeire
Updates to # already listed.

GLL G30, April 21, 2006 on casing envelope. Purchased new 3/24/2007. 3rd Gen, OD Frame, no rails.

Curious that Glock would release this old of a serial number so recently. Could this be a refurb? Or else Glock as some old stock sitting around waiting to be issued. Nice find. Thanks.

GLL - G-30 - April 2006 - - Purchased new 3/24/2007. 3rd Gen, OD Frame, no rails.

[vermeire]

Originally posted by dmobrien2001
Curious that Glock would release this old of a serial number so recently. Could this be a refurb? Or else Glock as some old stock sitting around waiting to be issued. Nice find. Thanks.

It isn't a refurb as far as I know. My uncle is an FFL and just got it ~2 weeks ago. It is my first GLOCK so I could be wrong. The sticker on the case has a barcode with the serial under it and GLOCK, model, and sight type above it. Then to the right is 5LB, a '2', and 10 RD. I assume referring to the trigger, number of mags and the capacity. Farther to the right is another sticker over part of the first that has GLGXXXXX at the top, a '12' in the center and GLLXXX at the bottom. I hope I've done a good job with my description. Is this second sticker normal for a NEW firearm? Is the GLGXXXXX another serial of some sort? I appreciate the help. One last thing, the slide and barrel both have the GLL serial on them and the barrel has the pentagon proof just to the right as well. Everything that was in the package was sealed; I opened both the manual and casing envelopes. Any comments are appreciated.

[GSD17]

I bought a new one today.

KUG - G27 - March 5 2007 - 3rd gen or 2.5 whatever you want to call it. - Blue label

[SGT67]

My OD green G30 also has a serial# GLL0xx I bought it new back in August 2005. yours may have been laying around for a while even though it is new. .

[Dandapani]

Originally posted by SGT67
My OD green G30 also has a serial# GLL0xx I bought it new back in August 2005. yours may have been laying around for a while even though it is new. .
What is the date on the little brown envelope containing the two fired cartridge casings?

His must have been laying around, unissued, at Glock, because his fired casing envelope is brand spanking new!

[wunder9]

KGD, G-17, May 2006, 3rd gen, Austrian proofmarks, LCI, 3 pin frame

[Dandapani]

Originally posted by wunder9
KGD, G-17, May 2006, 3rd gen, Austrian proofmarks, LCI, 3 pin frame

Is this a Filipino Glock?

How did you verify the date?

Thanks! :thumbsup:

[LRB2GZ]

KNL, G17 w/factory night sights, test fired Jan 17/2007

[wunder9]

dmobrien2001

Purchased it in the Philippines. Barrel date stamp is SOH.

[BanzaiWRX]

KNL XXX 3rd Gen G17 came with two 17 rounders.
date on the fired brass bag is 16 Jan 07

fixed sights, no 'US' in the serial number.

[LRB2GZ]

Originally posted by LRB2GZ
KNL, G17 w/factory night sights, test fired Jan 17/2007

Originally posted by BanzaiWRX
KNL XXX 3rd Gen G17 came with two 17 rounders.
date on the fired brass bag is 16 Jan 07

fixed sights, no 'US' in the serial number.

MY BROTHER!!!!!

[Dandapani]

Originally posted by LRB2GZ
MY BROTHER!!!!!

Twins. At least we know which of you were first born. :tongueout: :rofl:

[357sigmike]

KAR - G31 - 5/26/2006 :dancing:

[customG29]

KMG*** G22 .40 born on 10/16/2006 no us???

[Dandapani]

Originally posted by customG29
KMG*** G22 .40 born on 10/16/2006 no us???

No more "US" suffix on the frame serial number.

Look at the grip? What does it say? "Made in Austria" or just "Smyrna,...."?

[PaulRS]

KTY*** G22 Test Fired Feb 9 2007 3rd Gen. Made in Austria.

[customG29]

Made In Austria

[RM250DC]

HRK; G19; 10/05; 3rd gen. Date on fired case envelope is 10/28/2005

[RM250DC]

DKR; G23; 11/99; 3rd gen. Also
CLF; G30; 09/97; 2.5 gen. Both according to TopGlock and Glockmeister

[WolfiePacker]

KXH
Glock 23.
Gen 3.
LPI.
Red Label.
Test Fired March 19, 2007

[Dandapani]

Originally posted by WolfiePacker
KXH
Glock 23.
Gen 3.
LPI.
Red Label.
Test Fired March 19, 2007

HIGHEST SERIAL NUMBER REPORTED :milestone: :thumbsup:

:wave::wave::wave:
:wave::wave::wave:
:wave::wave::wave:

[BigWaylon]

Originally posted by dmobrien2001
HIGHEST SERIAL NUMBER REPORTED :milestone: :thumbsup:


new highest...;)

KYZ - G-22 - 3/22/07 (test fire date) - 3rd Gen - Blue Label

purchased 3/29/07

Greg

[Dandapani]

Originally posted by BigWaylon
new highest...;)

KYZ - G-22 - 3/22/07 (test fire date) - 3rd Gen - Blue Label


HIGHEST SERIAL NUMBER REPORTED :milestone: :thumbsup:

:wave::wave::wave:
:wave::wave::wave:
:wave::wave::wave:

[GSD17]

Were getting aweful close to the next prefix!

[Dandapani]

Originally posted by GSD17
Were getting aweful close to the next prefix!

We sure are! The tension is mounting.... Who will be the first to report a new prefix...

http://glocktalk.com/showthread.php?s=&postid=4622225#post4622225

[GSD17]

So, whatta we win if we get it right? :supergrin:

[Dandapani]

Originally posted by GSD17
So, whatta we win if we get it right? :supergrin:

All expenses paid* vacation to Las Vegas!

















* Disclaimer: you must pay all the expenses.

[GSD17]

:rofl:

[xxlethal9mmxx]

DPM - G-35 - JANUARY 2000 - Best gun i have ever owned. This gun will never leave my collection, regardless of what happens.

[elloquito26]

KTRXXX G-19 9MM MADE IN JANUARY 2007,MY FIRST GLOCK:banana:

[elloquito26]

KTRXXX G-19 9MM MADE IN JANUARY 2007,MY FIRST GLOCK:banana:

[GSD17]

:nailbiting:

Waiting for the next prefix....

[RM250DC]

Update to a previous post, DKRxxxUS - G-23 - 11/99 -3rd gen., and CLFxxxUS - G-30 - 09/97 - 2.5 gen. I had forgotten to designate the US suffix in the serial number, if it matters.

[BigWaylon]

Originally posted by GSD17
:nailbiting:

Waiting for the next prefix....


I bought the KYZ last week..."supposed" to pick up a NIB Blue Label G27 from the local police supply tomorrow...same place I got the KYZ that was test fired on 3/22...be interested to see what date/prefix it will have...stay tuned...:)

Greg

[Bigsteve]

FMDXXX, G-27, unknown date, 3rd Generation, shipped with 8# "+" connector, Blue label, Mags with #5 followers.

A new one today!
KWDXXX, G-23, Feb 28, 2007, 3rd Generation, Red label, Mags with #7 followers.

[apxpred]

G21sf - KVSXXX - 2/02/2007
pic rail

[Dandapani]

Originally posted by apxpred
G21sf - KVSXXX - 2/02/2007

Which spec rail? Picatinny or Glock?

[GSD17]

From a WTS ad.

HGF - G24 - June 2005 - 3rd Gen
KPE - G26 - ??? - 2.5 Gen
KLY - G17 - November 2006 - 3rd Gen

[GSD17]

Another, from a pic

BZG - G17L - ?? - 2nd Gen - Antiterrorista Brigada

[schj98]

KSP - G-22 - January 2007 - 3rd Gen - Pure Stock (my first GLOCK and I love it!)

[HKB]

KTU- January 2007 Red Label G22

[MrCowboy99]

KULxxx g34 - april 2007 - Gotta luv that "KUL" gun! Made in Austria Frame still

[mesteve2]

KWKxxx April Glock model 27 .40s&w pocket rocket

The most traded in Glock but I shall keep it.

As long as LEO Dept makes me carry the .40s&w.

I like the 38 & 39 in the .45gap.

steve

[mesteve2]

KWKxxx April Glock model 27 .40s&w pocket rocket

The most traded in Glock but I shall keep it.

As long as LEO Dept makes me carry the .40s&w.

I like the 38 & 39 in the .45gap.

steve

[Mike Morris]

KUD-G-26-March 20, 2007-3rd Generation (born on date from envelope)

[Bonedoc]

I feel LEFT OUT! YU72*** - hmm, where's my pretty girl?

[Dandapani]

Originally posted by Bonedoc
I feel LEFT OUT! YU72*** - hmm, where's my pretty girl?

What model? G-??

[Bonedoc]

Model 22 - .40 cal

[Dandapani]

Originally posted by Bonedoc
Model 22 - .40 cal

per TopGlock:

YU - G-22 - December 1991

[paper killer]

KTB Model 30 March 16, 2007

[GSD17]

Got another oddball for the list.


MO####HP - G22 - unknown - 3rd Gen - Missouri Highway Patrol, has badge and "MSHP" on the left side of the slide

[Dandapani]

Originally posted by GSD17
Got another oddball for the list.


MO####HP - G22 - unknown - 3rd Gen - Missouri Highway Patrol, has badge and "MSHP" on the left side of the slide

TG dates "MOHP" as 10/1/1993

I'll list it at the top as:

MO####HP - G22 - October 1993 - 3rd Gen. - Missouri Highway Patrol, has badge and "MSHP" on the left side of the slide

[Brooster40]

G23 KUBxxx 01/30/07 (Date on rounds fired) purchased 02/24/07

[TxCZshooter]

AKY - G19 - May 1993 - 2nd Gen - polygon stamped next to glock logo on barrel

[cmfiii]

KMY- G27- Oct 2006- 3rd Gen- Blue Label LE

[G19Tony]

G26 BPU4XX 10/95 GEN 2.5 TG Smooth finger grooves.:wavey:

[psaK9]

G23 gen 3 KUA084 purchased in Maryland March 07'

[myates]

KVU G-21SF 3rd Gen. with picatinny rail born on 3/13/07


Mike

[Rijndael]

BYC XXX G-26 June 1, 1996 2.5Gen

Has Meprolight Tru-Dot sights, MH3 on front. Don't know if they were original, due to the illumination is good at no light, but only ok in partial lit room.

[Dandapani]

Originally posted by Rijndael
Has Meprolight Tru-Dot sights, MH3 on front. Don't know if they were original, due to the illumination is good at no light, but only ok in partial lit room.

11 years... might be time for a new set. I think half-life of tritium is 11-12 years so they are half as bright as new.

[fireman1969]

Glock 23 FFA210 unknown date
Glock 30 KKN312 shell casings say date collected Sept. 14 2006

[XNDR17C]

KHL - G17C - January 2007, Smyrna GA. Frame, Barrel test fired 1/4/2007

[cav_pilot]

BGN G-17 3/1/95

[Bucky69]

Glock 21SF Serial Number - KVT0** born on March 13, 2007

[Dandapani]

Originally posted by Bucky69
Glock 21SF Serial Number - KVT0** born on March 13, 2007

Which rail? Picatinny or Glock? I'm assuming Picatinny.

[GSD17]

Got two more oddballs for ya.

CKF - G22 - unknown date - 2nd Gen - Missouri State Park Rangers (stamped on slide)

CRP - G22 - unknown date - 2nd Gen - Cedar Rapids Police (stamped on slide

[Dandapani]

Originally posted by GSD17
Got two more oddballs for ya.

CKF - G22 - unknown date - 2nd Gen - Missouri State Park Rangers (stamped on slide)

CRP - G22 - unknown date - 2nd Gen - Cedar Rapids Police (stamped on slide


Dates courtesy TG. Note the later alpha, but earlier date!

CKF - G-22 - December 1997 - 2nd Gen. - Missouri State Park Rangers (stamped on slide)

CRP - G-22 - March 1995 - 2nd Gen. - Cedar Rapids Police (stamped on slide)

[Belzelbub]

KWV G-19 March 2007

[LurkMastR]

G-27 KXNxxx gen 2.5 (finger grooves, no rail) new in box
Test fired 04/07/2007

purchased 04/20/2007

[BigWaylon]

Originally posted by BigWaylon
I bought the KYZ last week..."supposed" to pick up a NIB Blue Label G27 from the local police supply tomorrow...same place I got the KYZ that was test fired on 3/22...be interested to see what date/prefix it will have...stay tuned...:)

Greg


the KYZ G22 was bought on 3/29 after a 3/22 test fire...found out yesterday that my G27 showed up either Wed or Thu, and I pick it up Monday...gonna be interesting to see the prefix...

Greg

[Dandapani]

Originally posted by BigWaylon
the KYZ G22 was bought on 3/29 after a 3/22 test fire...found out yesterday that my G27 showed up either Wed or Thu, and I pick it up Monday...gonna be interesting to see the prefix...


I predict the G27 will have an earlier prefix, KX?.

[Dog1]

Awesome info

[Dandapani]

Originally posted by Dog1
Awesome info

generated by people just like you! :thumbsup:

[Butch]

KTP - G-17 - April (12th) 2007 - 3rd Gen. OD Green frame - red label.

http://img.photobucket.com/albums/0603/ButchG17/Glock%20pics/G17ODKTP.jpg

:supergrin:



:patriot:

[BigWaylon]

alright guys (and gals)...

G27 in hand...with a NEW prefix...

bought 4/23...test fired 4/17...

who's gonna win the "I guessed it prize?"

I'll give you a couple hours...then post the pic...;)

Greg

[BigWaylon]

no fun waiting anymore...

new highest...welcome to the next prefix!!

LAX - G-27 - 4/17/07 (test fire date) - 3rd Gen - Blue Label

purchased 4/23/07


the proof:

http://www.dodgetrucks.org/gallery/data/500/medium/DSCN4029.JPG

http://www.dodgetrucks.org/gallery/data/500/medium/DSCN4033.JPG

Greg

[BigWaylon]

now...where are the prizes for the GSD17 (the correct guess) and me (the first post)?

:)

[GSD17]

:banana: :broccoli: :dancingbanana: :pepper: :devildance:

[Dandapani]

Originally posted by BigWaylon
now...where are the prizes for the GSD17 (the correct guess) and me (the first post)?

:)

Recognition is its own reward! :tongueout: :rofl:

[nugentjeep45]

Hey! I just bought 2 new g17's with KVL serial #'s and a casing date of 2-14-07.Oddly,they are both made in Austria frames. I guess we are getting them from both places in order to keep up with demand.

[Iridium]

KVR728, G23C, 3rd gen, test fire date 2/28/07

[skorzeny]

KKPxxx, G-34, Aug 2006 shell casing envelope date, 3rd generation, frame made in Smyrna, GA (not Austria), 3rd frame pin, loaded-chamber indicator extractor, new style box

[xciton]

G17 Black
Austria
KSAxxx
Loaded chamber indicator
Test Fired Feb06/2007

This was purchased in Canada

[G19Tony]

Glock 36 FSHXXX Austria. The box states: NEW NOV 03. Topglock or this thread did not have an FSH prefix listed. I purchased this from a member of this board. :banana:

I will call Glock and find out for sure next week.

[Dandapani]

Originally posted by xciton
G17 Black
Austria
KSAxxx
Loaded chamber indicator
Test Fired Feb06/2007

This was purchased in Canada

Weird. We already have a KSA G-17, but it's frame was not made in Austria. I listed your's as well, however.

[no1mech]

FNE G-21 july 31 2003-3rd gen-LCI extractor-new style box-"LE Sales Only" 5lb trigger w/3 hc le/mil mags and 3 fired cases in envelope "7/31/2003"

[retsam]

4/28/07
Austria
Glock 17 3rd Generation
KTNxxx
Test Fire March 21st 2007

[norris7430]

KNMxxx = Glock 19 2006 3rd gen.:banana:

[Dandapani]

.

[Butch]

LAS - G21SF - April 24, 2007 (test fire date) - 3rd Gen, Picatinny rail, red label. :)



:patriot:

[mcaz]

GUN G-23 12/2004 3rd Gen. Stolen February 2007 (GUN134) :sad:

[Dandapani]

Originally posted by mcaz
GUN G-23 12/2004 3rd Gen. Stolen February 2007 (GUN134) :sad:

I listed it like this:

GUN - G-23 - December 2004 - 3rd Gen. - Stolen February 2007 (GUN134) - PM mcaz (http://glocktalk.com/private.php?s=&action=newmessage&userid=44687)

[mcaz]

Thank you, It's much appreciated.

[swilcoxaz]

KWY
G19
April 2007
3rd Gen
Made in Austria

[G31cshooter]

HID prefix Olive Drab Green Frame G32 3rd Gen. Bought 4-20-07.

[BustedFlush]

Originally posted by mcaz
GUN G-23 12/2004 3rd Gen. Stolen February 2007 (GUN134) :sad: Sorry to hear that. Cool SN alpha prefix too.

It does not show up in the Florida Department of Law Enforcement data base:

http://www3.fdle.state.fl.us/fdle/guns_search.asp

I guess they only include those stolen in Florida? I wonder if the states share this info at all. If there were such a big database, I could envision problems getting a recovered gun unlisted.

[GSD17]

That is because that is a local system.

NCIC is where all stolen firearms are entered.

Hard to get a look in it though, without being LEO, and even we have to have a reason.

[Dandapani]

Originally posted by G31cshooter
HID prefix Olive Drab Green Frame G32 3rd Gen. Bought 4-20-07.

Is this a non-USA Glock? What country? Was it new in box? This is an older alpha prefix.

[G31cshooter]

Frame says made in Austria, Spent cases say December 2006. Bought in Kansas, USA.

[Dandapani]

Originally posted by G31cshooter
Frame says made in Austria, Spent cases say December 2006. Bought in Kansas, USA.

Thanks. Another one of those weird out of order released alpha prefix.

HHR - G-32 - July 2005 - 3rd Gen.
HHZ - G-19 - Unknown - - purchased in Dominican Republic
HID - G-32 - December 2006 - 3rd Gen. - Olive Drab Green Frame, Bought 4-20-07, Austrian
HKC - G-17 - Unknown - 3rd gen - OD-Green, purchased March 2006
HKC - G-19 - Unknown - 3rd Gen. - Mariner Series, acquired May 2006, Philippines
HKD - G-33 - August 2005

[snerd]

LAGxxx - G-19 - April 2007 - 3rd Generation

has Austria marks and loaded chamber indicator

[voodoomanx]

FDLXXX - G 22C - 3rd Gen - 1/20/2003(date on envelope)

[G31cshooter]

HID - G-32 - December 2006 - 3rd Gen. - Olive Drab Green Frame, Bought 4-20-07, Austrian


CORRECTION !!!

HYD - G-32 - December 2006 - 3rd Gen. - Olive Drab Green Frame, Bought 4-20-07, Austrian


HYD not HID sorry!

Was at work and was going by memory:blondmoment:

[elsielover]

KVU - G21SF - Mar13/2007 - 3rd Gen

[Dandapani]

Originally posted by elsielover
KVU - G21SF - Mar13/2007 - 3rd Gen

Which rail? Glock or Picatinny?

[elsielover]

Picatinny

[aglocker1911]

KYU - G21SF standard Glock rail, night sights, red label box. Envelope in box dated 4 30 07.

[Dandapani]

Originally posted by aglocker1911
KYU - G21SF standard Glock rail, night sights, red label box. Envelope in box dated 4 30 07.

First SF reported with standard rail! :banana: :banana: :banana:

[Judgemax]

*

[rdharper]

KSVxxx
G-26
Test Fired: 2/23/2007
Purchased: 4/23/2007

Gen 3? or maybe 2.5 (You tell me.)

[Dandapani]

Originally posted by Judgemax
If dmobrien is right, it looks like I now have the "oldest" 21SF standard rail reported????????????????

KYU*** 21 SF/GR/MB born 4/27/07 and came in a blue label box.

:banana: so it seems. We have other SF's without rail specified...

[Dandapani]

Originally posted by rdharper
KSVxxx
G-26
Test Fired: 2/23/2007
Purchased: 4/23/2007

Gen 3? or maybe 2.5 (You tell me.)

Precisely a Gen 3, but "conventionally" 2.5 Gen.

[simonrichter]

ZZ - G-17 - ? - 2nd Gen - Austrian Markings, no polygon barrel (ordinary rifling)

[Dandapani]

Originally posted by simonrichter
ZZ - G-17 - ? - 2nd Gen - Austrian Markings, no polygon barrel (ordinary rifling)

Is there a serial number on the barrel?
Does it match the slide and frame?
If not matching, is it of the form "Lnnnn"?

[simonrichter]

Originally posted by dmobrien2001
Is there a serial number on the barrel?
Does it match the slide and frame?
If not matching, is it of the form "Lnnnn"?

there is a serial number on the barrel (where it is forming the block that locks with the ejection port), matching the numbers on slide & frame.

I was a little bit surprised because I thought all 2nd gen. Glocks feature polygonal barrels. My arms dealer told me that maybe this one is out of an production run especially for an Army or Police Force which sometimes choose a cheaper rifled barrel for costs per unit reduction.

kind regards
Simon

[darkside852003]

G19
LAKxxx
Test fired May 1'st 2007

G19
HZRxxx
Test fired April 07 2006

G34
KADxxx
Test fired April 24 2006

[Judgemax]

*

[Dandapani]

Originally posted by Judgemax
Dmobrien,
After using my new 21SF as posted just above, I pulled out my old 21 bought in 5/01. It has a # I don't see listed in this thread or on Topglock.

EDD***US 3rd gen FS w/8lb connecter

It has the angled extractor face but extractor itself is not the loaded chamber indicator version.

Did I miss something or is this some kind of odd-ball? Also, how would I be able to find out if the new style extractor can be used in this gun?

P.S. Ignore this post if I being too much of a pain in the ass.

1) Do you have a date for your EDD? We don't list one in our DB. A 2001 is consistent with the range in the DB that have dates:
EDB - G-19 - March 2002 - 3rd Gen. - Purchased in Buenos Aires
EDF - G-26 - Unknown - 3rd Gen.
EDH - G-17 - Unknown - 3rd Gen. - 3 pin frame / No Frame Recall
EDK - G-17 - May 2001 - 3rd Gen.
EDM - G-20 - Unknown - 3rd Gen. - No Frame Recall
EDN - G-21 - Unknown - 3rd Gen.
EDP - G-21 - Unknown - 3rd Gen. - No Frame Recall
EDT - G-22 - April 2001 - 3rd Gen.

2) Post your question regarding converting to LCI over in the General Glocking forum. More Glock experts over there. I'm a glorified book keeper and this thread doesn't get much viewing traffic. Butch, the real expert, does check in from time to time, but better to get his attention over in GG.

[Judgemax]

*

[Dandapani]

Originally posted by Judgemax
I was thinking of trading this gun in but wanted to know if the EDD***US serial # put it in some interesting, or recall catagory. When I did'nt see it on your (fantastic) list I wondered whether it was worth holding on to it, or sending it back to Glock.


From the range it seems to not be in the "recall" list, but only Glock can tell you for sure. Call them and find out.

Since you have the 21SF, the 21 might be redundant. :)

[EARRNHARDT3]

G21SF serial # KYU 1** blue lable ,Glock rail, fixed sights, born on date 4/27/07

E3

[berk73]

G21SF/GR/MB red label
KYTxxx test fired Apr27/2007

[Judgemax]

>

[Eagle1]

Just got a G21SF standard rail, blue label gun with a casing date of April 27, 2007. The serial number prefix is KYT9**.

[Glocknarc]

EXV - G-27. I bought mine in 2002 (Maybe October?)
Glockmeister or Topglock has no record of this serial number.

[grethor]

Glock 23 3rd generation - I bought it brand new in August 2006.

Date of manufacture: 6-1-06

serial = KDW###

It has KDW### stamped on the frame and the barrel as well.

It also has the pentagon symbol stamped on the barrel.

It says "made in austria" on the frame and has "austria" on the slide.

[SW342]

:thumbsup:

[Dandapani]

Originally posted by Sly Dog
When GT refers to "Born On Date", is this in reference to the "Test Fired Date"?

Yes, the closest thing we have for a "BOD". You can also call Glock to get a BOD.

[Dandapani]

Originally posted by Glocknarc
EXV - G-27. I bought mine in 2002 (Maybe October?)
Glockmeister or Topglock has no record of this serial number.

None of the online daters have newer prefix/dates (> "DXZ").

Yours was made around August 2002 looking at the "neighboring" prefixes.

[Czecher]

Just picked up a g23 today


KPB G-23 December 19 2006 (Per envelope) 3rd Gen --Salesman Demo Version

[dertis]

G 36

Serial #: KVH - XXX

Test fired: 3/22/07

Purchased: 5/7/07

[js_gresham]

KWGXXX - G26 - Fixed Sights, 2 10-rd mags, May 02/2007

[762minigun]

HRRXXX Glock 22 3rd Gen, Glock night sites, 3 standard 15round LE marked mags white label

[Mr.Niceguy]

G17
HELxxx
5/19/2005 Date Collected
5/16/2007 Purchased NIB

[Tilley]

G19
KWW___
Test fired 03/07/07
Bought May 2007

[chewysolo]

G-23 KZWxxx April 16 2007 red label

[johnydoe]

Originally posted by darkside852003
G19
LAKxxx
Test fired May 1'st 2007


same here but topglock.com database has LA* for 12/1/1989???

[Dandapani]

Originally posted by johnydoe
same here but topglock.com database has LA* for 12/1/1989???

They have LA0... - LA9... not LAA-LAZ.

[johnydoe]

Originally posted by dmobrien2001
They have LA0... - LA9... not LAA-LAZ.

My LAK*** G19 I bought on May 7th was test fired on May 1st. Very Fresh.

[Dandapani]

Originally posted by johnydoe
My LAK*** G19 I bought on May 7th was test fired on May 1st. Very Fresh.

Yes, very fresh with no expiration date! :banana: :banana: :banana:

[dickdaney]

G19 Lcgxxx

test fired 5/11/2007

purchased may 07

[troy96]

G23 CSWxxx

6/1/1998

I didnt need a third G23 but I couldnt let the poor thing spend its birthday in a gunshop case. It was all dirty and abused...now its all clean and has new friends.

[Jeff82]

Originally posted by troy96
G23 CSWxxx

6/1/1998

I didnt need a third G23 but I couldnt let the poor thing spend its birthday in a gunshop case. It was all dirty and abused...now its all clean and has new friends.
Now that's conservative compassion!! :thumbsup:

[madcitycop]

somebody pm me with some help mines a glock 27 EDG ends in US. Anybody? PM Me

[Dandapani]

Originally posted by james.dexter
somebody pm me with some help mines a glock 27 EDG ends in US. Anybody? PM Me

PM incoming

[dasanii19]

"LAK" 5/1/07 Glock 19

[legion3]

Glock G19 BUTxxxUS...2nd gen 3/1/1996 as per top glock

[m4arc]

Glock 26 with factory night sights (GNS) :

Serial Number: KSVxxx
Born On Date: Feb 26, 2007

[madcitycop]

EDG
Import: 4/9/01

[wesley]

g30 KTB-xxx
testfired march 7 07
purchased may 11 07

[Dandapani]

Originally posted by james.dexter
EDG
Import: 4/9/01

What G model?

[Dandapani]

Originally posted by wesley
G30 purchased 5-11-07 ser#KTB-XXX
not sure on the manf. date according to the chart sometime after KTA-XXX in feb 07

Didn't the paperwork include a little brown envelope containing two fired cartridge casings? What's the date on that envelope? I didn't think CA was doing ballistic fingerprinting...

[eskram]

G23 - KXGxxx

Test fired on March 08, 2007
Purchased on May 16, 2007

[wesley]

Didn't the paperwork include a little brown envelope containing two fired cartridge casings? What's the date on that envelope? I didn't think CA was doing ballistic fingerprinting...
It did but i hadn't picked it up until last night...
g30 KTB-XXX
testfired march 7, 2007
purchased may 11 2007

[CNYGlocker]

G-19c KSExxx
envelope dated May 2,2007

[Postal]

KZU XXX
G-19
test fire 4/18/2007
bought 5/4/2007
Red Label

[Dandapani]

Originally posted by CNYGlocker
G-19c KSExxx
envelope dated May 2,2007

Nice. We don't get many "C" models. Thanks!

[glockjeeper]

LCYxxx
G26
Test fired date: May 18th, 2007
Standard configuration w/white label.

[Sniperfox]

2 G21s
CNVxxxUS- Purchased in 1998 or 99.
HYMXXX Shells collected Mar. 15 2006
Can someone PM me with the info, particularily on the CNVxxxUS model
thanks

[Dandapani]

Originally posted by Sniperfox
2 G21s
CNVxxxUS- Purchased in 1998 or 99

TopGlock dates it: 1/1/1998

I recorded it as:

CNV - G-21 - January 1998