prefered 2011 parts and brand [Archive] - Glock Talk

PDA

View Full Version : prefered 2011 parts and brand


jojo_G19
08-09-2005, 05:00
i need them for my project.. i already have sti slide and sti long dust frame..

i still need many parts but dont know kung ano ang magagandang parts for it.. i need help on this guys.

Barrel - Scheumann or Bar-sto??
Front Sight - ?
Rear Sight - Bomar
Hammer/Sear - ?
Sear Spring -?
Ambi Safeties - ?
Recoil Spring - ?
Firing Pin/Spring - ?
Extractor - ?
Ejector - ?
Disconnector - ?
Beaver Tail - (memory grip)?
Guild Rod/Spring - ?


tnx
jojo;f

Eye Cutter
08-09-2005, 06:31
Schuemann barrel
King's or EB Ambi Safeties
Aftec Extractor

royal glockster
08-09-2005, 07:35
[QUOTE]Originally posted by jojo_G19
[B]i need them for my project.. i already have sti slide and sti long dust frame..

i still need many parts but dont know kung ano ang magagandang parts for it.. i need help on this guys.

Barrel - Scheumann
Front Sight - caspian fiber optic
Rear Sight - Bomar BMC2
Hammer/Sear - STI square hammer/wilson sear
Sear Spring - Ed Brown
Ambi Safeties - Ed Brown competition model
Recoil Spring - wolff spring 14 lbs.
Firing Pin/Spring - STI titanium
Extractor - Ed Brown
Ejector - Kings extended
Disconnector - wilson
Beaver Tail - arsmcor ok na rin
Guide Rod/Spring - let your gunsmith fabricate a durable guide rod

Valor1
08-09-2005, 09:02
Let me see:

Barrel - Schueman, Bar-sto, Nowlin
Front sight - caspian or any gunsmith fabricated fiber optic sight
Rear- wala na tatalo sa Bomar (specially for competition)
Hammer/Sear- STi or Ed Brown Hardcore Hammer and Perfection Sear
Recoil spring - ISMI, Nowlin or Wolff
Beavertail - Ed Brown Memory Groove or Armscor (para mura talaga)
Firing Pin - Ed Brown Hardcore or Wilson Combat Bulletproof
Extractor - Ed Brown Hardcore or Wilson Combat Bulletproof
Disconnector - Ed Brown
Ambi Safeties - Ed Brown competition model
Guide rod - Ed Brown or fabricated by your favorite gunsmith

batangueno
08-09-2005, 19:32
Barrel - Bar-sto
Front Sight - Dawson Precision
Rear Sight - Bomar
Hammer/Sear - Doug Koenig/EE
Sear Spring -Dawson Precision
Ambi Safeties - EB
Recoil Spring - ISMI (12.5 lbs)
Firing Pin/Spring - Limcat/ISMI
Extractor - Aftec
Ejector - EGW
Disconnector - EE
Beaver Tail - STI
Guild Rod/Spring - EGW tungsten

GMV
08-09-2005, 20:09
My choices:

Barrel - Scheumann
Front Sight - Brazos Microdot/Dawson Precision
Rear Sight - Bomar
Hammer/Sear - Koenig/EGW or Ed Brown Perfection Sear
Sear Spring - Ed Brown Hardcore
Ambi Safeties - Ed Brown Ambidextrous
Recoil Spring - ISMI
Firing Pin/Spring - Limcat/ISMI
Extractor - AFTEC
Ejector - Ed Brown
Disconnector - Ed Brown Perfection
Beaver Tail - Ed Brown Memory Groove
Guide Rod/Spring - STI/ISMI
Hammer Strut - Ed Brown
Trigger - SVI Triglide w/ Short Curved Insert
Magwell - Dawson Precision (Aluminum)
Magazines/Followers/Springs - STI/Arredondo Teflon (White)/ISMI (or alternatively Grams Followers and Springs)
Basepads - yung sa gunsmith ni Infinity

Good luck on the project! :)

Eye Cutter
08-09-2005, 23:44
Originally posted by batangueno
Barrel - Bar-sto
Front Sight - Dawson Precision
Rear Sight - Bomar
Hammer/Sear - Doug Koenig/EE
Sear Spring -Dawson Precision
Ambi Safeties - EB
Recoil Spring - ISMI (12.5 lbs)
Firing Pin/Spring - Limcat/ISMI
Extractor - Aftec
Ejector - EGW
Disconnector - EE
Beaver Tail - STI
Guild Rod/Spring - EGW tungsten

batangueno: yan laman ng pistol natin, a! ;f

homer_m
08-10-2005, 01:35
Barrel - Schuemann AET
Front Sight - EGW fiber optic
Rear Sight - Bomar BMCS
Hammer/Sear - STI/STI
Sear Spring - Infinity titanium
Ambi Safeties - Ed Brown/STI
Recoil Spring - ISMI (12.5 lbs)
Firing Pin/Spring - Limcat/ISMI
Extractor - Aftec
Ejector - EGW extended
Disconnector - Infinity tri-glide
Beaver Tail - STI squared
Guide Rod/Spring - Cominolli tungsten

batangueno
08-10-2005, 08:56
Originally posted by Eye Cutter
batangueno: yan laman ng pistol natin, a! ;f
Hehe...subok na kasi eh. ;f

doctabako
08-11-2005, 01:41
Barrel - Limcat Hi-Tech
Front Sight - Brazos Microdot
Rear Sight - Bomar Low cut
Hammer/Sear - STI
Sear Spring -STI
Ambi Safeties - EB
Recoil Spring - ISMI (12.5 lbs)
Firing Pin/Spring - Limcat/ISMI
Extractor - Aftec
Ejector - STI
Disconnector - STI
Beaver Tail - STI
Guild Rod/Spring - EGW tungsten
Shock Buff - 1 Wilson Blue and 1 EGW Black

Kasi yan din ang sa loob nung akin. Haven't had problems since I acquired it :)

Eye Cutter
08-11-2005, 02:20
bakit hindi kayo nagkakaproblema sa mga shock buffs ninyo? 'langhiya ako lang yata ang hindi hiyang sa buffs.

everytime i put a buff in my pistols, nag ja-jam. Gamit ko wilson blue, sps blue and tried clear buff, lahat napi-pitpit, nag jam na pistol!

batangueno
08-11-2005, 02:26
Originally posted by Eye Cutter
bakit hindi kayo nagkakaproblema sa mga shock buffs ninyo? 'langhiya ako lang yata ang hindi hiyang sa buffs.

everytime i put a buff in my pistols, nag ja-jam. Gamit ko wilson blue, sps blue and tried clear buff, lahat napi-pitpit, nag jam na pistol!
Baka sobrang talas ng recoil plug mo. Gamit ko yung red hiett na buffs.

jojo_G19
08-11-2005, 02:35
dami plang choices, available ba hlahat nang parts na to dito sa pinas? or kailangan ko pang magorder sa net.

tulad nang scheumann barrel, wala yata available ngaun d2, meron sa true weight ung schuemann barrel na 38k ang price ( nakalimutan ko ang tawag nila dun), meron yatang scheumann barrel na 18-19k lng kaso walang stock.


jojo

batangueno
08-11-2005, 02:45
Jojo, i think what you mean is the Schuemann AET barrel. Mas lalong walang stock ng schuemann barrel ngayon sa states. May problema yata sila sa factory and they are also moving shop.

maomanila
08-11-2005, 02:48
Mga Kapitbahay!

What exactly is "2011"?

Mukhang exciting mag buo ng project na yan ah. How much will it all cost, more or less?

Maraming salamat.

batangueno
08-11-2005, 02:54
Originally posted by maomanila
Mga Kapitbahay!

What exactly is "2011"?

Mukhang exciting mag buo ng project na yan ah. How much will it all cost, more or less?

Maraming salamat.
The STI/SV/SPS are the 2011 formats. Look at tanduay's and i_am_infinity's pistols in separate threads for an example.

Welcome to the BOG. ;f

doctabako
08-11-2005, 04:02
Originally posted by batangueno
Baka sobrang talas ng recoil plug mo. Gamit ko yung red hiett na buffs.

sharp recoil spring housing or a weak recoil spring. You can also try the Black shock buffs that can be bought at True Power, they're super hard and I sandwich the wilson blue's(which are relatively soft) between it and the recoil guide's foot plate, haven't replaced them ever since.

Re: 2011 its actually an STI trademark, the concept of which was originally designed by Chip McCormick then improved and marketed by Sandy Strayer, Virgill Tripp (S and T of STI) who aren't connected anymore with the company they founded which is now headed by Dave Skinner.

SV's (Strayer-Voight) frames are actually called Infinity(unless I'm horribly mistaken}which operates under a shared patent with the original design. Strayer is deemed as the tech-whiz of the duo which is the reason why SV's design includes a lot of improvements over the original STI design.

SPS is working on a copyright infringement of the above designs but seems just as good( 'di ba JuDGe :))

tanduay
08-11-2005, 17:22
Barrel - Scheumann or Bar-sto
Front Sight - microdot
Rear Sight - Bomar
Hammer/Sear - koenig hammer/egw or sti s7 sear or cylinder & slide

Sear Spring - clark 4 leaf
Ambi Safeties - edbrown or kings
Recoil Spring - wolff or ismi
Firing Pin/Spring - edbrown
Extractor - afterd
Ejector - edbrown
Disconnector - edbrown
Beaver Tail - edbrown
Guild Rod/Spring - local lang para mura

jojo_G19
08-12-2005, 02:40
Batangueno:
Patay na...problema pala ngaun ang barrel ko, inofer sakin nag true weight and sti barrel nila, they say that scheumann din saw ang gumawa nang barrel na un, ewan ko lang...;f , wait nlang siguro muna ako, other parts nlang muna ang bibilhn ko.


jojo

homer_m
08-12-2005, 02:59
jojo,

why don't you try barsto? cheaper than schuemann. 15k-16k.

Eye Cutter
08-12-2005, 03:03
jojo: meron pa yatang schuemann and barsto sa first option

i was also asking at the BE forums who makes the sti barrels. no one confirmed if schuemann was making it for STI.

another option is the Limcat barrel with the tungsten sleeve for the extra weight. di ko lang alam san meron ng limcat. baka sa jethro

jojo_G19
08-12-2005, 03:17
DOC;
c grace of ture weight ang ang sabi sakin na STI Barrels are made by Scheumann kasi i was looking gor s scheumann barrel..nung bumubili ako nang frame. kasi i was going to buy frame and barrel, i ended up buying frame and slide instead.


jojo

jojo_G19
08-12-2005, 03:20
BTW, d ba dapat ang sear and hamer should match? so thats what "they" say na dapat ang sear and barrel should be of the same manufacturer para daw match ung 2...

totoo ba to???;f

jojo

tanduay
08-12-2005, 03:44
Jojo

Hindi totoo yan. ang hammer ko koenig and sear ko sti. Ang alam ko barrel ng sti hindi gawa ng schuemann. mab barsto ka manganda and mura pa compare sa schuemann. Before schuemann ngayon barsto na sa new gun ko. Try mo kay Laiza baka may barsto pa

Eye Cutter
08-12-2005, 03:53
jo: kami ni batangueno gamit namin cylinder and slide sear and disconnector. Yung kay batangueno koenig hammer, sa akin c&s litespeed hammer

try mo sa first option kung meron pa sila schuemann bbl

jojo_G19
08-12-2005, 04:29
Buti nlang hinde ako kumuha nung barrel na sti...;f

jojo

batangueno
08-12-2005, 06:16
Ang advantage ng matched hammer, sear and disconnector is less work for the gunsmith which means less chances of him screwing up the trigger job. Yung kay Doc nga drop-in lang lahat pero sub 2lbs na yung trigger weight and very crisp pull. Highly recommended talaga yang C&S or Extreme Engineering, they are the best parts that you can get kaya pinaka expensive din.

Eye Cutter
08-12-2005, 16:53
i've read in their respective websites and at the BE forum na yung c&s sear and disconnector and matched with either the doug koenig hammer, sti or litespeed hammers ang gamit ngayon ng bedell custom, dawson precision, brazos custom, benny hill and jl hardy.

Eye Cutter
08-12-2005, 16:55
paul: na-measure mo na yung trigger pull ng open pistol mo? parang pareho yata yung pull gaya ng sa akin. 1.75 lbs

jojo_G19
08-12-2005, 20:49
anong "c&s"? --heheheh


tnx,
jojo

tanduay
08-12-2005, 20:57
cylinder & slide

Originally posted by jojo_G19
anong "c&s"? --heheheh


tnx,
jojo

jojo_G19
08-12-2005, 21:05
Tanduay: Tnx tol


jojo

Eye Cutter
08-13-2005, 01:03
jojo: eto ilagay mo sa sti project mo!


Cylinder & Slide Warpspeed Hammer Set (https://shop.cylinder-slide.com/ccp51/cgi-bin/cp-app.pl?usr=51F8861389&rnd=1494445&rrc=N&affl=&cip=210.213.189.84&act=&aff=&pg=cat&ref=43&catstr=HOME:6)

st. matthew
08-13-2005, 03:38
pasingit ;f ,gusto ko rin yatang magumpisa ng project;Q ,nakakaenganyo kasi kayo:drool: ^7 ^7
where do i start? frame,slide,barrel and grip? what would you recommend guys?which s_i should i get?what shop in manila should i go?oo pala i'm planning to use it sa standard division sana, kaya 40 cal. siya. it's my first 1911/2011 , kaya i need your ;4 ;4 ;4

Eye Cutter
08-13-2005, 04:52
sti long dust cover frame is now 50k at true weight
sps long dust cover 42k, short dust cover 24k at PB Dionisio

STI unique slide - 19k?
Caspian slide - 16k?
Barsto barrel - 15k
Schuemann barrel - out of stock used to go for 19k

batangueno
08-13-2005, 05:52
Start with the frame, kasi pag nabili mo na 'yon wala ng atrasan sa project. ;f

st. matthew
08-13-2005, 07:07
Originally posted by Eye Cutter
sti long dust cover frame is now 50k at true weight
sps long dust cover 42k, short dust cover 24k at PB Dionisio

STI unique slide - 19k?
Caspian slide - 16k?
Barsto barrel - 15k
Schuemann barrel - out of stock used to go for 19k

ok ok dahan dahan lang hehehe,liit lang allownce natin ;f ,
doc what would you recommend sti or sps?

st. matthew
08-13-2005, 07:13
Originally posted by batangueno
Start with the frame, kasi pag nabili mo na 'yon wala ng atrasan sa project. ;f


salamat sa strong moral support hehehe;f
yes bro hanggang frame tyaka slide muna ako,mahina kasi kupit
ngayon ;f ;N

tanduay
08-13-2005, 08:53
mag bar-sto kana maganda and mura pa. Maganda din ang sps frame and ang slide ng sps maganda din and mura pa

Eye Cutter
08-13-2005, 09:16
kahit alin, although preferred and SVI and STI. if you can get an SVI frame, yun gamitin mo.

ok din SPS, madali supply from PB Dionisio.

sila Deenoh yata mag import ng STI frames

batangueno
08-13-2005, 09:24
Originally posted by Eye Cutter
paul: na-measure mo na yung trigger pull ng open pistol mo? parang pareho yata yung pull gaya ng sa akin. 1.75 lbs
Hindi ko pa na-measure, subukan ko sa First Option may gauge sila.

st. matthew
08-13-2005, 18:16
o eto na nasa ulo ko guys,copied the internals from batangueno;J ;f
pag may kailangan pang parts pakidagdag naman;J

frame=s_i ^8
slide=s_i ^8

Barrel - Bar-sto
Front Sight - Dawson Precision
Rear Sight - Bomar
Hammer/Sear - Doug Koenig/EE
Sear Spring -Dawson Precision
Ambi Safeties - EB
Recoil Spring - ISMI (12.5 lbs)
Firing Pin/Spring - Limcat/ISMI
Extractor - Aftec
Ejector - EGW
Disconnector - EE
Beaver Tail - STI
Guild Rod/Spring - EGW tungsten

st. matthew
08-13-2005, 18:21
Originally posted by tanduay
mag bar-sto kana maganda and mura pa. Maganda din ang sps frame and ang slide ng sps maganda din and mura pa

i checked their(sps) site maganda nga, at pbdionisio is their distributor sa atin ,thanks:) #wav
yes i'll get barsto

guys pakipost naman pics ng sps nyo;W
thanks

tanduay
08-13-2005, 18:34
check mo sa thread under new blaster ang sps ko

st. matthew
08-13-2005, 18:43
Originally posted by tanduay
check mo sa thread under new blaster ang sps ko

didn't know it was an sps ;J ,ganda!^7
kasama ba yung grip sa frame pag binili?
thanks #wav

oo pala what about paperworks? pagbinili mo frame,barrel and slide may paperworks ba yun,like registration?license?

tanduay
08-13-2005, 19:11
customize lahat yan. ultimo yung grip gawa. bago ka mag pa assemble required yung iba pang down para sa frame. will start fitting pag labas na license. Ewan ko lang sa ibang smit.

st. matthew
08-13-2005, 19:15
Originally posted by Eye Cutter
sti long dust cover frame is now 50k at true weight
sps long dust cover 42k, short dust cover 24k at PB Dionisio

STI unique slide - 19k?
Caspian slide - 16k?
Barsto barrel - 15k
Schuemann barrel - out of stock used to go for 19k

dok, yung sti frame kasama ba ang grip? nakita ko kasi sa site ng sti na kasama yung grip sa frame mga $500, mahal talaga sa atin no.
thanks:)

st. matthew
08-13-2005, 19:20
Originally posted by tanduay
customize lahat yan. ultimo yung grip gawa. bago ka mag pa assemble required yung iba pang down para sa frame. will start fitting pag labas na license. Ewan ko lang sa ibang smit.

bro,si danny torevillas,saan gunshop niya?

Eye Cutter
08-14-2005, 00:38
Kasama na grip, magcatch and trigger pag bili mo ng frame.

Dati pati 1 magazine kasama, ngayon wala na. 1 magazine costs 4800 na yata.

Si Danny T. sa Ormoc City yata based ang shop niya

jasonub
08-14-2005, 02:51
my setup

frame SVI long dust
slide STI full profile unlightened
rear sight- bomar
front- brazos microdot .040 fiber
BArrel- shueman ultimatch
sear- svi or egw dont know na
hammer- koeinig
disconnetor-svi
hammer strut svi or sti titanium
ms cup titanium sti
recoil spring 12.5 ismi cut 1 coil
hammer spring 15 pounds ismi no cutting
safety ed brown ambi
firing pin svi
fp stop svi bought an egw and have not installed it yet
guide rod- cominolli tungsten
mag tubes- svi with gramms eng followers and springs or sv followers and ismi springs
base pad- col bayang and tony pascual.
magwell svi aluminum
trigger svi triglide short trigger insert
sear spring svi triglide
mag release svi
beavertail ed brown memory groove (working safety)

good luck on your choice. remember its the shooter that wins and not the gun. you just want the gun to be reliable/accurate and durable.

true weight built the gun pala

st. matthew
08-14-2005, 03:34
Doc, thanks :) #wav . medyo malayo ormoc ;f

Jason, puedeng matanong kung magkano ang charge ng true weight sa
pag assemble ng blaster mo and mga ilang araw bago matapos;J thanks:) #wav
pagsakaling nabuo toy ko,pangpogi points ko lang siguro hehehe;f ;j ;f ;j
yung g17 ang pangharabas ko,improve ko muna sarili ko sa production;e ;e

THANKS AGAIN GUYS!post ko toy ko pagbuo na,mga ??? years from now;J ;J ;J ;J

tanduay
08-14-2005, 04:16
Ormoc si Danny Malinis at maganda. Pag kuha ko putok nalang. Shooter din sya and rp team

Sa tru weight matagal mo pa makuha marami kasi order. Last time ng inquire ako atleast 6 months daw at ayaw pa nila tanggapin. Pila pila daw. Heard magaling din si tony at mura ang labor nya. Si jay kay tony din.

Eye Cutter
08-14-2005, 04:57
Eto PO P16-40 ko and PO Single Stack in .45 cal

http://img.photobucket.com/albums/v483/eyecutter/P16web.jpg

http://img.photobucket.com/albums/v483/eyecutter/PairofParasNegativeweb.jpg

http://img.photobucket.com/albums/v483/eyecutter/PairofParas.jpg

Eye Cutter
08-14-2005, 05:00
Sana ito na open pistol ko! naiinip na ako! ang tagal mabuo!

http://img.photobucket.com/albums/v483/eyecutter/shortchromealchin.jpg

st. matthew
08-14-2005, 05:48
can i assemble my project myself?;f;P did any of you guys tried? super hirap ba? ^8

......another alternative is..?? aha what if i buy a para in .40 cal then unti unti kong palitan internals nya....hmmmm???;5 ;5 ;9 ;9 pero must ok talaga s_i..??? ;G ;G ;G
what do you think guys

tanduay
08-14-2005, 06:06
doc,

Benta na limited gun para mabuo na ang open ;) naka infra red ang pics mo ah.

Originally posted by Eye Cutter
Sana ito na open pistol ko! naiinip na ako! ang tagal mabuo!

http://img.photobucket.com/albums/v483/eyecutter/shortchromealchin.jpg

Eye Cutter
08-14-2005, 06:45
tanduay: nasa gunsmith (PBD) na yung sps open pistol ko. sa dami ng trabaho, hindi maisingit! asar!

st. matthew: okay na option din Para frame for your project. Tapos palitan mo na lang internals. Yung top end you have choices of using an sti or caspian slide and a barsto or schuemann barrel.

Si bokbok_05 at si gunfool ganun yata gagawin nila. Armcor as base then slowly change to premium parts. In the end matitira lang na original ay yung frame.

bulm540
08-14-2005, 07:22
Originally posted by st. matthew
can i assemble my project myself?;f;P did any of you guys tried? super hirap ba? ^8

......another alternative is..?? aha what if i buy a para in .40 cal then unti unti kong palitan internals nya....hmmmm???;5 ;5 ;9 ;9 pero must ok talaga s_i..??? ;G ;G ;G
what do you think guys
Pare Huwag, you may end up with an expensive paper weight. I am not saying you can't do it but if you don't have any experience with any gunsmithing, leave to the pros.

st. matthew
08-14-2005, 07:48
Doc, ^c oo cguro ganun na lang muna,baka sa para ord muna ako, magagamit ko pa agad(wala pa kasi akong bakal na baril ;J ;J ;a )
thanks#wav


bulm540, oo bro won't do it myself,can't wait kasi;J ;J
thanks#wav


sosho tayo sariling gunshop natin para hindi na tayo pumila pagawa laruan natin hehehe;f ;f `s `s ^1 ^1 ^1

tanduay
08-14-2005, 09:42
ayaw mo mag production?

jojo_G19
08-14-2005, 11:44
hehehe...itong gun building project unti-unti na nagiging epidemic ah... kumakalat na sa buong BOGs.. hehe;z

Doc,
ung nabili ko na STI frame sa TrueWeight nung gunshow may kasama DAW 1 mag and lic. (kasi tinanong ko un bago ako bumili;Q).

Jasonub;
Magkano inabot nang gamit mo? (Labor & materials)


jojo

bulm540
08-14-2005, 14:32
Originally posted by st. matthew
Doc, ^c oo cguro ganun na lang muna,baka sa para ord muna ako, magagamit ko pa agad(wala pa kasi akong bakal na baril ;J ;J ;a )
thanks#wav


bulm540, oo bro won't do it myself,can't wait kasi;J ;J
thanks#wav


sosho tayo sariling gunshop natin para hindi na tayo pumila pagawa laruan natin hehehe;f ;f `s `s ^1 ^1 ^1
I understand, IPSC -it is like a drug.

mc_oliver
08-14-2005, 18:42
;1

gunfool
08-14-2005, 19:47
Originally posted by Eye Cutter
tanduay: nasa gunsmith (PBD) na yung sps open pistol ko. sa dami ng trabaho, hindi maisingit! asar!

st. matthew: okay na option din Para frame for your project. Tapos palitan mo na lang internals. Yung top end you have choices of using an sti or caspian slide and a barsto or schuemann barrel.

Si bokbok_05 at si gunfool ganun yata gagawin nila. Armcor as base then slowly change to premium parts. In the end matitira lang na original ay yung frame. Hehehehe. Di ko na masyadong papapogiin yung Amrscor ko. Lam no yun kung bakit doc.;f

jasonub
08-14-2005, 20:16
dont know the final price.

i also installed an aftec extractor pala.

get the pistol that lito is selling. 09178375533. it was built by a reputable smith that died recently. forgot his name. para frame and sti internals slide ata caspian or sti. barrel is shueman or barsto.

st. matthew
08-14-2005, 22:17
Originally posted by jasonub
dont know the final price.

i also installed an aftec extractor pala.

get the pistol that lito is selling. 09178375533. it was built by a reputable smith that died recently. forgot his name. para frame and sti internals slide ata caspian or sti. barrel is shueman or barsto.

just called up lito,nabili na~sd ~sd

st. matthew
08-16-2005, 05:15
need your help again guys;J ;J ;J ;J
saan shops ba meron ang mga parts na to?
paki lagay na rin price ;J ;J ;J
thank you ulit!!#wav ;c ;c


Barrel - Bar-sto
Front Sight - Dawson Precision
Rear Sight - Bomar
Hammer/Sear - Doug Koenig/EE
Sear Spring -Dawson Precision
Ambi Safeties - EB
Recoil Spring - ISMI (12.5 lbs)
Firing Pin/Spring - Limcat/ISMI
Extractor - Aftec
Ejector - EGW
Disconnector - EE
Beaver Tail - STI
Guild Rod/Spring - EGW tungsten

tanduay
08-16-2005, 06:50
Stronghand, truweight or any other local gunstore
clark 4 leaf Sear Spring - maganda na to
Ambi Safeties - EB
Ejector - EGW
Beaver Tail - STI
Barsto - Laiza or baka meron makaktulong sayo dito

Alternative (available @ local gunstore)
Front sight - sti or caspian
Hammer/Sear - sti spur/sti s7 premium
Recoil spring - wolff
Firing pin - Edbrown/sti
Extractor, disconnector - edbrown
Guide rod - edbrown, wilson or local.

st. matthew
08-16-2005, 07:09
thanks tanduay;c #wav

salamat sa mga pms' nyo #wav

i_am_infinity
08-16-2005, 07:50
Sir JOJO how much bili nyo sa STI frame from TW? when did u but it? thanks po.

jasonub
08-16-2005, 17:34
ok

jojo_G19
08-16-2005, 19:49
i_am_infinity: nakalimutan ko nung gun show ko pala binili, Sent u a pm

st. matthew
08-16-2005, 22:05
thanks sa mga pms' nyo#wav
i_am_infinity, ako siguro ricecooker na lang gamitin ko para masaya si mother;f `l

Eye Cutter
08-17-2005, 05:05
jason: edit mo na rin post mo! ;f

st. matthew
08-17-2005, 07:41
;4 ;4 pag nagorder ako ng bar-sto barrel for an sti slide under what style siya? under browning high power ba siya?^8 ^8
salamat for the nth time:) ;f #wav

i_am_infinity
08-17-2005, 07:51
BARSTO Para/Clark

st. matthew
08-17-2005, 07:57
Originally posted by i_am_infinity
BARSTO Para/Clark

Para P??^8. bro wala ako nakita clark.
thanks bro:)

Eye Cutter
08-17-2005, 08:11
most sti/svi and sps have square cuts in the frame. wilson/nowlin cut tawag dun. the barrel lugs have a step or L-shaped cut.

the Para Ord barrel lugs have extra material w/c are ellipse/oval in shape. Para/Clark style lugs tawag dun.

st. matthew
08-17-2005, 08:33
Doc: alin sa kanila ang dapat?;J ;J
thanks:) #wav

bar-sto (http://www.barsto.com/category_main.cfm?ID=PARA)

tanduay
08-17-2005, 08:41
Originally posted by st. matthew
Doc: alin sa kanila ang dapat?;J ;J
thanks:) #wav

bar-sto (http://www.barsto.com/category_main.cfm?ID=PARA)

Colt style. dapat ramped type. Kung ako, kuha ako bull barrel ramped & wilson/nowling cut para sa sps & s*i na frame

maganda ang springfield na gawa ng barsto. Mahal lang

st. matthew
08-17-2005, 08:58
Originally posted by tanduay
Colt style. dapat ramped type. Kung ako, kuha ako bull barrel ramped & wilson/nowling cut para sa sps & s*i na frame

maganda ang springfield na gawa ng barsto. Mahal lang


aahh! nakuha ko na, colt style siya na government^5 ^5 ^c ,
pag springfield dapat yung 5";J ;J ;J
salamat na naman,huwag kayo magsawa ha,
;J ;J ;J

bulm540
08-17-2005, 17:29
Originally posted by Eye Cutter
most sti/svi and sps have square cuts in the frame. wilson/nowlin cut tawag dun. the barrel lugs have a step or L-shaped cut.

the Para Ord barrel lugs have extra material w/c are ellipse/oval in shape. Para/Clark style lugs tawag dun.
My SVI came with para clark ramped barrel. They say it is more durable die to a little bit more material.

bulm540
08-17-2005, 17:30
Originally posted by tanduay
Colt style. dapat ramped type. Kung ako, kuha ako bull barrel ramped & wilson/nowling cut para sa sps & s*i na frame

maganda ang springfield na gawa ng barsto. Mahal lang
It doesn't matter waht kind of ramp cut. The gunsmith has to cut it, if your frame does not have a ramp cut.

ilocano
08-19-2005, 04:16
st. matthew: Kunin mo na un para ko ng sa ganun ay diretso ka na sa range. Nakita na ni glock17(production top dawg from DPSA) gun ko-guaranteed to at wala sa vocabyolaryo nya(para) ang "jam". very accurate naka zero na. wala kang gagawin kundi kalabitin at himasin. kaset-up nadin mga mags- 18 kinakarga nun 3, un 1 19, naka basepads na lahat.

jojo_G19
08-19-2005, 07:35
dont know how true... they say that bar-sto barrels are accurate kaya lang medyo mapili daw sa shells.

pls comment..

tnx
jojo

tanduay
08-19-2005, 08:19
Originally posted by jojo_G19
dont know how true... they say that bar-sto barrels are accurate kaya lang medyo mapili daw sa shells.

pls comment..

tnx
jojo

Totoo na mas accurate ang bar-sto pero depende din sa fitting. Wala ako problema sa shells. May mga assorted akong shell pero la ako problema. Sa riming ding siguro yan

st. matthew
08-19-2005, 09:12
Originally posted by ilocano
st. matthew: Kunin mo na un para ko ng sa ganun ay diretso ka na sa range. Nakita na ni glock17(production top dawg from DPSA) gun ko-guaranteed to at wala sa vocabyolaryo nya(para) ang "jam". very accurate naka zero na. wala kang gagawin kundi kalabitin at himasin. kaset-up nadin mga mags- 18 kinakarga nun 3, un 1 19, naka basepads na lahat.

sent you a PM bro,thanks:)

doctabako
08-19-2005, 09:41
St.Matthew

Ilocano's gun sounds like a good deal, hope that PM to him says you're getting it as the price is reasonable :). The Para-O's advantage over the STI is that it holds more rounds(and that's a big advantage) and with a guarantee like what he stated regarding its performance you're spared future headaches in tuning your gun.
In case you're wondering ..... No, I don't know Ilocano personally ;f

st. matthew
08-19-2005, 10:00
Originally posted by doctabako
St.Matthew

Ilocano's gun sounds like a good deal, hope that PM to him says you're getting it as the price is reasonable :). The Para-O's advantage over the STI is that it holds more rounds(and that's a big advantage) and with a guarantee like what he stated regarding its performance you're spared future headaches in tuning your gun.
In case you're wondering ..... No, I don't know Ilocano personally ;f

thanks Dok, i did PM him and will see the unit(well not me but a friend of mine,nasa work pa kasi ako).kung saan saan pa ako naghahanap,sa neighbor ko pala meron hehehe:) ;f