heini sights in a g17,is it allowed in the production division [Archive] - Glock Talk

PDA

View Full Version : heini sights in a g17,is it allowed in the production division


st. matthew
08-12-2005, 20:07
some say yes it's allowed but some say no. Nakakalito^8 ^8
would like to ask you guys kung puede nga talaga;4
thanks in advance:) #wav

mc_oliver
08-12-2005, 22:23
Yes. Throw the rulebook at whoever says it's not. ;)

st. matthew
08-12-2005, 23:57
hehehe! ;i ;i yes i will, thanks!#wav

9MX
08-12-2005, 23:59
hahaha, tapos dq ka for unsporstmanlike conduct ;f

Eye Cutter
08-13-2005, 00:57
of course, it should be drop in parts. di ba judge? ;f

get the CGR race cut heinies with a slim (.090, .100 or .110 inch) front sight.

i was able to try a glock with heinie rear sight and it was really a lot easier to "see" out compared to the stock pyramid rear sights.

accdg to most glock shooters, ito ang best set-up raw sa glock. i think Dave Sevigny uses this set-up.

st. matthew
08-13-2005, 03:13
thanks guys!#wav sana wala akong makatapat na matinding R.O.;T ,i heard this happened to a fellow bogs,was it judge?:) anyway salamat uli,hoping to join you in one of your shootings/barbecues ;Y

JuDGe
08-13-2005, 03:15
Originally posted by Eye Cutter
of course, it should be drop in parts. di ba judge? ;f

get the CGR race cut heinies with a slim (.090, .100 or .110 inch) front sight.

i was able to try a glock with heinie rear sight and it was really a lot easier to "see" out compared to the stock pyramid rear sights.

accdg to most glock shooters, ito ang best set-up raw sa glock. i think Dave Sevigny uses this set-up.

puwedeng-puwede yan! ;f ... meron na tayong supporting docs from the dark force himself (vince pinto - chairman, ipsc handgun rules committee and production rules committee) and just lately from mr rey ganaban - nroi, executive director ;f

Point 20.2 of the IPSC Production Division Rules:

"Aftermarket sights of the same type and kind offered by the OFM for the approved handgun are permitted, provided their installation and/or adjustments requires no alteration to the handgun."

12.5 Glossary of the IPSC January 2004 Rulebook defines the following:

Aftermarket..... Items not manufactured by, or available directly from the OFM.
OFM ............. Original Firearm Manufacturer

However note that fibre-optic sights would not be legal,
as such sights are not offered by Glock. ;f

JuDGe
08-13-2005, 03:26
Originally posted by st. matthew
thanks guys!#wav sana wala akong makatapat na matinding R.O.;T ,i heard this happened to a fellow bogs,was it judge?:) anyway salamat uli,hoping to join you in one of your shootings/barbecues ;Y

yes it did..... pero may 'baon' na tayo ngayon to prove the legality of the use of aftermarket sights in production ;f

kung meron man RO who would challenge the legality of the use of aftermarket sights just happily explain to him the rules at kung ayaw pa din just take note of his name ;f

st. matthew
08-13-2005, 03:51
Originally posted by JuDGe
yes it did..... pero may 'baon' na tayo ngayon to prove the legality of the use of aftermarket sights in production ;f

kung meron man RO who would challenge the legality of the use of aftermarket sights just happily explain to him the rules at kung ayaw pa din just take note of his name ;f


what was your baon?;f
magbabaon din ako :cool:

thanks judge :) #wav

JuDGe
08-13-2005, 05:22
IPSC Global Village - Best Sights for Glock17 Production.... (http://ipsc.invisionzone.com/index.php?showtopic=479&hl=sights)

IPSC Global Village - Glocks& PD ..... (http://ipsc.invisionzone.com/index.php?showtopic=1372)


And always bring along your IPSC January 2004 Rule Book, quoting Point 20.2 of the Production Division Rules should already be enough. Supporting na lang yung print-out mo nung discussions sa IPSC Global Village kung mahirap talaga ma convince yung RO. ;f

st. matthew
08-13-2005, 07:26
Originally posted by JuDGe
IPSC Global Village - Best Sights for Glock17 Production.... (http://ipsc.invisionzone.com/index.php?showtopic=479&hl=sights)

IPSC Global Village - Glocks& PD ..... (http://ipsc.invisionzone.com/index.php?showtopic=479&hl=sights)


And always bring along your IPSC January 2004 Rule Book, quoting Point 20.2 of the Production Division Rules should already be enough. Supporting na lang yung print-out mo nung discussions sa IPSC Global Village kung mahirap talaga ma convince yung RO. ;f

salamat sa baon;f ;f
may i also ask what sights are you using for your g17? thanks#wav

JuDGe
08-13-2005, 07:47
http://img.photobucket.com/albums/v122/gaston770/G17c.jpg

http://img.photobucket.com/albums/v122/gaston770/G17b.jpg

st. matthew
08-13-2005, 18:32
ganda! did you install it yourself? o sa gunsmith? mahirap daw install harap
thanks :)

JuDGe
08-14-2005, 18:21
you can do it yourself if you have the necessary tools.... screwdriver, pliers, hammer, loctite.... di ba mc_oliver?!!! ;f

9MX
08-14-2005, 18:26
judge,

andami mo namang tools na ginamit. kay mco, dremel lang lahat yan. ;f

mc_oliver
08-14-2005, 18:32
Nung nag install ako ng bomar ni gundog sa karingal, bato at mighty bond gamit namin! ;f;f

JuDGe
08-14-2005, 18:32
kaow! pag dremel ginamit eh bawal na sa production... kasi altered na yung slide! ;f ;f ;f

JuDGe
08-14-2005, 18:35
Originally posted by mc_oliver
Nung nag install ako ng bomar ni gundog sa karingal, bato at mighty bond gamit namin! ;f;f

hehehe... nung nag full-auto din yung STI ni SS_Holter sa armscor eh bato din lang ginamit namin to detail strip his pi_tol! ;f

mc_oliver
08-14-2005, 19:17
Ayoko na ng armscor, tuwing nagdi-detail strip kelangan ng tools. STI pala bato lang pede na? ;f;f;f