Question about cleaning new rifle

[Tito's Glock]

I have a new Colt 6920 carbine.

I know how to field strip, and disassemble the bolt carier. I plan to clean everything then re-lube including cleaning the barrel.

Do you reccommend that I disassemble and clean the:

1: trigger group

2: bolt spring / recoil spring assembly

3: gas tube

?????

TIA,

Tito

[tyler2you]

I'd give the bolt/carrier, upper receiver, and barrel a good clean and lube. Only other part I'd worry about would be giving the buffer and tube a light coat of oil in case it ran off during storage and shipping. I wouldn't be too concerned about the trigger group, gas tube, etc.

Enjoy it.

[G. Gunman]

:) Nice carbine. Leave the gas tube and trigger group alone for now. Get a hold of one of Brownell's catalogs. It's got all of the special tools you'll need to eventually strip and tune that puppy. The next step is a compact Trijicon ACOG.

Check this out! (http://www.opticsplanet.net/trijicon-15x16-acog-with-m16-base-tritium-illuminated-amber-dot-reticle-bac-ta44-5.html)

Here's Brownells (http://www.brownells.com/Default.aspx) ;)

[JWP]

i use clp or oil on the trigger/hammer pins in the trigger group, smoothes the trigger action some