Para Ord .40 Barrel [Archive] - Glock Talk

PDA

View Full Version : Para Ord .40 Barrel


Django
12-11-2005, 17:36
Folks,

Do you know where I can get an original Para Ord .40 S&W barrel? Or maybe an accurate .40 S&W barrel(Barsto, Ultimatch,etc.)? Came in too late sa PB sale. One popular gunstore owner bought all the SV and Schumann .40 barrels on sale there!

I need it for an ongoing (tinker,tinker) project.:)

Thanks.

9MX
12-11-2005, 20:13
try jethro, but i'd recommend you buy the barrel with somebody who knows scheummann stuff :)

mc_oliver
12-11-2005, 20:45
You need a Para barrel with a Para/Clark cut ramp dre? Because if the frame you have now is a Wilson/Nowlin cut, I suggest you get the really inexpensive Armscor barrel instead. ;)

batangueno
12-11-2005, 21:09
Buy an armscor barrel na lang. Saves you more money for the open gun. ;f

Eye Cutter
12-12-2005, 00:30
bakit? .40 cal ba ang gagawin mong open gun? hahaha! go with .38 super instead!

Atty. Jun: Enjoy sa Open Division! pag natikman mo, ayaw mo na bumalik sa ibang divisions!

Django
12-12-2005, 05:34
Originally posted by mc_oliver
You need a Para barrel with a Para/Clark cut ramp dre? Because if the frame you have now is a Wilson/Nowlin cut, I suggest you get the really inexpensive Armscor barrel instead. ;)

Sir McO: Frame is original Para Ordinance so can I use the Armscor barrel in this platform? :)

Doc EC: I have a .45 Para Ord. I was able to buy a .40 slide from PB at PhP 7 thou per your thread. Bought also an extractor, ejector, firing pin and firing pin stop. All I need now is a .40 barrel and a visit to the good Col. Bayang, then I'll have a .40 caliber standard gun.

This is for my 14 year old son whom I want to introduce to the IPSC discipline and I'd rather that he start in the standard division with a .40 gun than a .45 one. You know, lesser recoil, more loads, all that stuff.

No need to worry, Doc. My sights are already set for an open gun. Idol ko kasi si Gundog, eh. ;f

Eye Cutter
12-12-2005, 06:11
irrc, armscor barrels have a wilson/nowlin ramp. wala na bang .40 sps or nowlin barrel ang PB?

gundog
12-12-2005, 06:17
atty django, tama c doc ec you will enjoy the open gun. mas dali mag moonwalk at mas ganda sa mtv ;z

the dark side is calling ;f

Django
12-12-2005, 06:17
Originally posted by Eye Cutter
irrc, armscor barrels have a wilson/nowlin ramp. wala na bang .40 sps or nowlin barrel ang PB?

Wala na. One gunstore owner bought all their .40 barrels on sale.:(

Django
12-12-2005, 06:32
Originally posted by gundog
atty django, tama c doc ec you will enjoy the open gun. mas dali mag moonwalk at mas ganda sa mtv ;z

the dark side is calling ;f

Hahaha. Lalo na yung reverse moonwalk. ;f ;f ;f

mc_oliver
12-12-2005, 21:31
Ay oo, kung para frame dapat P/C yung ramp cut.

GMV
12-12-2005, 21:51
Atty Django, check out this link from www.buyandsellplus.com (somebody selling an armscor .40 cal barrel, paraord cut):

http://www.buyandsellplus.com/classifieds/item.php?itemid=49238

mc_oliver
12-13-2005, 01:48
Armscor barrel na P3.2K? Yay...;f

bokbok_05
12-13-2005, 03:13
inquired at armscor...2700 daw ang .40 bull/ramped barrel. and yes marami silang stock.

Django
12-13-2005, 04:54
Originally posted by bokbok_05
inquired at armscor...2700 daw ang .40 bull/ramped barrel. and yes marami silang stock.

Guys,

Puede ba ang Armscor barrel sa Para?

Eye Cutter
12-13-2005, 07:34
yep, basta para/clark ramp ang i-specify mo!

mtho
12-13-2005, 12:14
yung mga nakita kong buo na hi cap na armscor mga para clark ramp yung nakakabit.

bokbok san armscor ka naginquire? ano number nila?

bokbok_05
12-13-2005, 17:01
ano number nila?
9414265/9417328 - tue to sun :)

Django
12-13-2005, 17:18
Originally posted by Eye Cutter
yep, basta para/clark ramp ang i-specify mo!

Okey dokey. Thanks Doc EC. Will go Armscor then. As Sir Batang said, save all your nickels and dimes for an open gun. So be it. ;f

9MX
12-13-2005, 19:29
Originally posted by Django
Okey dokey. Thanks Doc EC. Will go Armscor then. As Sir Batang said, save all your nickels and dimes for an open gun. So be it. ;f

yup, armscor barrels have proven themselves capable of beating schumann barrels on s_i frames? nyahahahahaha!;z

jasonub
12-13-2005, 19:47
armscor barrels are ok for our sport. its accurate enough for a huge a zone at normal ipsc distances.

If you want a bullseye gun or a real accurate gun you will specify the high end barrels. If i wanted to shoot bullseye ill go for the kart barrels, then aet, then barsto/ultimatch.

for the best of both words i choose the ultimatch.

My gun can hit the standard bullseye for uit at 50 meters (10,9,8,8,9)if i do my part. normally i can get less than an inch groupings(center to center about .78") using stronghand heads and n320 at 25 meters.

just find out what you want and what you want the gun to do then choose from there.

mc_oliver
12-14-2005, 01:11
Originally posted by mtho
yung mga nakita kong buo na hi cap na armscor mga para clark ramp yung nakakabit.

bokbok san armscor ka naginquire? ano number nila?

Wait! Wait! Armscor frames come with Nowlin/Wilson cuts. The W/N armscor barrels won't work on a Para frame unless ibi-build up yung frame (or barrel, not sure just check with the smith.) But kung mey ire-retoke man, make sure it's the cheapest part. ;)

Sakit sa ulo yan dre. Open na lang i-build up mo. ;);f Hehehe

mtho
12-14-2005, 03:07
sir Mco,
yung nakita kong mga 9mm na hicap sa squiresbingham mga naka para/clark ramp na.
nagtanung tanung ako, yung slide ng .40 pwede gamitin sa 38super.so barrel nalang pwede ka na mag 2 in 1.

Allegra
12-14-2005, 04:39
Originally posted by mtho
sir Mco,
yung nakita kong mga 9mm na hicap sa squiresbingham mga naka para/clark ramp na.
nagtanung tanung ako, yung slide ng .40 pwede gamitin sa 38super.so barrel nalang pwede ka na mag 2 in 1.


Slide ng 40 pwede sa 38 super?
alam ko 38super pwde gawin 40 mot the other way around

mtho
12-14-2005, 06:40
nagtanung ako dahil kontingkoti lang yung difference ng lapad ng breachface nila.ito nakuha ko o.

http://www.pistolsmith.com/viewtopic.php?t=26713

http://www.brianenos.com/forums/index.php?showtopic=30341

Allegra
12-14-2005, 07:07
oo nga ano
Parang nakatakot lang magadjust adjust sa high pressure round

batangueno
12-14-2005, 08:23
Puede pala yun. Ma-convert na nga rin yung 40 ko sa 38super para back-up open gun. ;f

mc_oliver
12-14-2005, 18:29
Originally posted by mtho
nagtanung tanung ako, yung slide ng .40 pwede gamitin sa 38super.so barrel nalang pwede ka na mag 2 in 1.
Dre, one thing about being here in da Pilipins is that marami tayo pede'ng gawin. At relatively mura yung labor. In fact, I'm considering using a 45 slide for a super open gun.

Also, in the other forums, sinasabi nila 'di pede 40 breech face pag 9mm gagamitin mo. But I've seen one run na naka switch barrel, 9 at 40, gawa ni Col. Bayang. Pati extractor di nag palit, although they would recommend na mey different extractor ka for each. At eto pa, 40 na mags pa yung gamit for the 9. ;)

Yung 40 singlestack na in na in sa US, 'di ba hirap sila maghanap ng mags? Eh dito sa atin yung mga naka 40 SS gamit 45 na mags. ;)

Bilib sa gawa ng Pinoy! ;) hehehe

Allegra
12-14-2005, 19:52
Kaso, your adding a few more factors that would contribute to a jam :)

mc_oliver
12-14-2005, 20:43
Yep, true Master A. Kaya nga palagi ko'ng dala yung martilyo at wrench ko just in case. ;f

Seriously, it all boils down to your builder. If he knows what he's doing, chances are you'll have a lot less probs with your gun. So it's really important you pick one na nakita mo na na gumagana talaga yung mga binu-buo niyang baril. ;)

Allegra
12-15-2005, 04:08
Originally posted by mc_oliver
Yep, true Master A. Kaya nga palagi ko'ng dala yung martilyo at wrench ko just in case. ;f

Seriously, it all boils down to your builder. If he knows what he's doing, chances are you'll have a lot less probs with your gun. So it's really important you pick one na nakita mo na na gumagana talaga yung mga binu-buo niyang baril. ;)


Of course, alam mo naman worried lang ako palagi sa putok nyo ;)

Kasi naman yung dating baril ko, hindi ko naman tinipid sa parts, 2 magaling na gunsmith ang nagtotono , nag jajam pa rin hehe
Mabuti na yung mas kokonti ang iniisip , masyado na busy magbantay sa kalaban eh hehe

Django
12-16-2005, 07:51
Found a new Barsto .40 S&W barrel selling at P18K. I am now doing the math since a new Armscor .40 gun is selling at P25K or thereabouts. So instead of buying this barrel, would it be better that I cough out an additional P7K, and get the full gun?

Then I won't have to touch my .45 Para at all and have a new .40 and still retain my .45.

Whadya think guys? Am I penny wise and pound foolish or what? ;Q

Eye Cutter
12-16-2005, 08:20
i'd still go with a new upper. although the cost and addtitional parts will come out as expensive as getting a new pistol, the smithing and replacement of all the stock parts of a new armscor .40 will still be more expensive than just getting a new upper.

you can have a supplemental license for the new .40 cal added to your Para .45

mtho
12-16-2005, 21:42
django,
squiresbingham in santolan was on sale when i passedby early this week. I think in was 30% off. anyway with a new pistol you have to spend for another renewal every 2 years. but if you should decide to sell one of your pistols you'd still have the other.

Django
12-17-2005, 04:58
Thanks for the info, mtho.:)