Reload recommendation [Archive] - Glock Talk

PDA

View Full Version : Reload recommendation


jeric777
01-23-2006, 09:43
anong mas magandang reload para sa glock? teflon coated o copper coated?

Ersatz0906
01-23-2006, 16:17
gamit ko teflon coated, very easy to clean after shooting...
I havnt use copper coated but in cleaning same with teflon.

the only difference that I know is the price, I could get teflon around 5.75 while copper coated is 6pesos

Django
01-23-2006, 17:25
Go for teflon. Better if you use FMJ.

batangueno
01-23-2006, 18:42
Teflon that is .356 in diameter. I've experienced in my G17 na yung .355 na teflon balagbag.

jeric777
01-24-2006, 05:13
medyo mahal kasi fmj e, kaya reloads gamit ko, yung teflon coated, parang ordinary lang ata na pintura, at pag copper coated, parang manipis din ata coat nya, kaya bago lumabas ng barrel, baka may leading na.

bikethief
01-24-2006, 07:16
Get teflon heads from true weight. Kapal ng teflon. No significant fouling.

Allegra
01-24-2006, 08:32
Originally posted by jeric777
medyo mahal kasi fmj e, kaya reloads gamit ko, yung teflon coated, parang ordinary lang ata na pintura, at pag copper coated, parang manipis din ata coat nya, kaya bago lumabas ng barrel, baka may leading na.


FYI, there are fmj reloads din , mejo crispilicious pa ang recoil impulse

Django
01-24-2006, 08:40
Very true. I was referring to FMJ reloads in my earlier post.

jeric777
01-24-2006, 09:15
hmm... may fmj pala na reloads... mga magkano kaya?

Ersatz0906
01-24-2006, 16:03
Not sure, but armscore can do reloads with your empty shells with FMJ. dont know about the price, maybe a bit expensive compare to teflon. try mo muna teflon...

sir can frequent use of FMJ significantly increase wear of the barrel?

jhun
01-24-2006, 16:22
Last time I asked, it was 6 pesos. sayo ang shell

Django
01-24-2006, 16:28
Jeric777,

P6.00 per bullet if you're a member of Armscor. If not, I think it's around P7.00.

Ersatz,

It would depend on the number of grains and the type of gumpowder you load behind the bullet. But theoretically, all things equal, the fmj's will wear out your barrel faster than lead, the latter being generally a softer metal than the former. Unless it is already an alloy and mixed with other metals as what some lead bullet manufacturers do.

But not to worry. Your barrel was designed for fmj's and not for lead. :)

Glock24c
06-21-2009, 05:04
you guyz know where i can buy a ported barrel for my 24c?

boholglock
06-21-2009, 07:12
Lone Wolf could be a plce to check.
If you mean locally, a 24c barrel s very hard to find.

mtho
06-21-2009, 11:02
sorry twilight zone again

techno97
07-16-2009, 23:46
has anyone been able to prepare loads for the G21 that would pass in standard, or rather, with a PF of 165 or above? would appreciate any assistance on the matter