CZ Fanatic list!

[TexasGlock23]

Well I figured we could start the # system here also. I'll start off as #1. Let's fill it in CZ Fanatics!

List as follows:

000.Atlasx
1.TexasGlock23
2.SonnyD
3.12 Volt Man
4.smurph
5.Rob1035
6.AZnine
7.Ed Ely
8.Polo
9.dirksterg30
10.atcdoug
11.tombo
12.Dobber
13.msc
14.Sqalbra76
40.Sqtred
44.22/45
50.rhkirk1
56.krang
67.cpirtle
69.hillst1
75.4eyes
76.c00p
85.donbubbo
97.Blankwaffe
101.Kiddo
239.acpk9eod
327.seamus
515.aubie515
666.muscogee
1000.Butcher
1384.epsylum
1945.volkstrm
1975.Cuda
4570.dgludwig
4075.m2hmghb

[SonnyD]

I'll Play. I'm a long time CZ Fanatic! and am usually never without 4 or 5 in my collection. I'll take #2
Regards Sonny

[sgalbra76]

I want #14.

Current CZs:
1) CZ 75BD 9mm
2) CZ P-01 9mm
3) CZ 97B .45acp

[dirksterG30]

I'll take 9

[donbubbo]

Just ordered an 85b....so I'll take 85

[TexasGlock23]

At this time I am not an owner just yet. I am getting one though! Fear not! I am buying the RAMI 9mm for my girlfriend to carry. If I like the thing I may scoop one up and have it hard chromed. How are the P-01, Compact 75 and RAMI's holding up?

[4eyes]

#75 for 4 eyes, please.

[c00p]

I'll play too...#76 please. Has anyone sticky'd this thread?

[TexasGlock23]

How do you sticky? Doesn't a mod have to do that?

[atcdoug]

I'll be #10.

Doug

[cpirtle]

Please put me down for #67, thanks!

[SonnyD]

Originally posted by TexasGlock23
At this time I am not an owner just yet. I am getting one though! Fear not! I am buying the RAMI 9mm for my girlfriend to carry. If I like the thing I may scoop one up and have it hard chromed. How are the P-01, Compact 75 and RAMI's holding up?

They hold up GREAT. I loose count of how many rounds some of mine have. My current stable consist of 2 PO1's,an SP01 Tactical, a 75B, and a 52. I've owned the 83, IPSC, 85, PCR,75SA, and numerous 75b's. I've never had a failure. All you have to do is change out the springs, the sooner the better, and that's about all the maintenance you'll need.

Regards Sonny

[TexasGlock23]

thanks, my RAMI is on order and is comming in in a week.

[atcdoug]

I'm new to the CZ but absolutely love it. I have about 500rds thru both my P01 and 85b. Not a single issue. I ordered a steel rod and 16 lb spring for my 85. What other springs need to be replaced?

Doug

[SonnyD]

TG23....I should have also added, I'm glad your getting the 9mm RAMI, the 40S&W's are a little spotty on function, but I've heard nothing but good from the 9MM's

Regards Sonny

[epsylum]

#1384 for me

[TexasGlock23]

That is great to hear. Last thing I want to do is buy something else that Im going to hate!

[SonnyD]

The only weak point I've found in CZ's are the springs. Even new the springs don't measure up. I go with Wolf. I change out the Recoil and mag springs. I've not had a bad hammer or firing pin spring, but an occasional weak extractor spring.
Recoil
Extractor
Mag
and that should do it.
they'll function fine with the originals, but they are alot more efficient with good springs

Regards Sonny

[scowall]

i would like #5 if possible, i love my PO1, had a rammi in 40 and had a ftf and fte, I'm sure the factory of a smith could have fixed but sold it fast, CZ produces some of the most economical and reliable pistols and long guns on the market. although not alot of people realize it......thanks Scott

[m2hmghb]

I'll take 75-40 if it's available

[ks40sw]

Can I have 75-BD please;f

ks40sw

[huaco]

I've never had a member number and still haven't a clue what they're for but since I have a 9mm PCR and a Kadet Kit how about 922?

[TexasGlock23]

Originally posted by SonnyD
The only weak point I've found in CZ's are the springs. Even new the springs don't measure up. I go with Wolf. I change out the Recoil and mag springs. I've not had a bad hammer or firing pin spring, but an occasional weak extractor spring.
Recoil
Extractor
Mag
and that should do it.
they'll function fine with the originals, but they are alot more efficient with good springs

Regards Sonny

Is this a fairly simple procedure? As for the member with odd numbers, lets stay with 75 rather than 75-xx.
Repost what number you two would like. Thanks

Jared

[TexasGlock23]

The number thing is just for fun. I too asked the same question a few months ago when I first became a memeber.

[nosuchagency]

ur giving me cz envy dammit. i'll take the first wanna-be cz # available. i suspect somewhere after epsylum...

[TexasGlock23]

Who said we were letting wannabe's in? Guess I can't really say much though, I don't even posses mine right now. Damn out of stock stores!
Throw me a number out and it is yours. They are up to date. So choose away.

[nosuchagency]

thx for invite. hopefully, i'll be back before long with the true credentials to join your ranks. i suspect a .40 cz may be my next "metal" pistola. in the mean time, you guys post lots of pics!

[TexasGlock23]

only pic I have so far http://i32.photobucket.com/albums/d25/jared1217/g004.jpg
http://i32.photobucket.com/albums/d25/jared1217/guns013.jpg
http://i32.photobucket.com/albums/d25/jared1217/guns009.jpg
http://i32.photobucket.com/albums/d25/jared1217/blah002.jpg
http://i32.photobucket.com/albums/d25/jared1217/blah001.jpgnot the best shot yet.

[TexasGlock23]

the first target is @ 100 yds. with a rifle. 16 shot fired, 16 hit.
second was the first time shooting my G23 at 7 yds. I beleive. Not the best. But I had never shot a .40 before

[m2hmghb]

I'll take 4075 then

[rhkirk1]

Glad to finally see a CZ club! I'll take any number, say 50.

I love my 75BD!!

[SonnyD]

Originally posted by TexasGlock23
Is this a fairly simple procedure? As for the member with odd numbers, lets stay with 75 rather than 75-xx.
Repost what number you two would like. Thanks

Jared

Yeah, it's nothing difficult for the spring replacment. Of curse the mag springs and recoil change just like a Glock or any other gun. The extractor is held in by a role pin. There are several roll pins on the CZ's but a 2mm and 3mm pin punch will take care of them all.
The extractor spring is the last one I'd worry about. Actually I wouldn't worry about any of them, it's just that they are a little weak, and everything works better with better springs. If you check out www.gunsprings.com it will give you all the spring weights and numbers that you need.

Regards Sonny

[TexasGlock23]

Thanks, I'll look into it after we get her!

[aubie515]

<---would like #515

[muscogee]

I have a 52, an 83, and an 82. My next one will be a RAMI.

I would like number 666.

[22/45]

I'll take #44, since that's my Milsurp #.

Here are my CZ's:

75B "Military" with factory rubber grips

http://www.splat-co.com/ht/cz75b.jpg

75 Compact

http://www.splat-co.com/ht/cz75c.jpg

52 Rearsenaled

http://www.splat-co.com/ht/cz52.jpg

[TexasGlock23]

Doesn't seem like the CZ fanlist is very long! Come one people. Betcha can't shoot just one;)

[Dobber]

Sign me up. I'll take #12

[acpk9eod]

Put me in for #239 if available. 75B with a 75 on the way.

[smurph]

I would like to sign up. I would like to be # 4. I have aquired a new 85b, P-01, and a new Dan Wesson/CZ C-bob in 45 acp. all of this in the last week. Hows that for getting bit by the CZ bug.

[Blankwaffe]

I will take #97.
Looks like Im the only CZ 97B owner here,so its a good number.

[Kiddo]

I'll take number 101 please. CZ75 compact here. Thanks. :cool:

[TexasGlock23]

updated!

[12 Volt Man]

Put me down too :)

[Butcher]

i'll take #1000 :D
'bout time we got ourselves a club here

[AZnine]

Add me to the list any number.
CZ 75B 9mm - Angus trigger work and sights
CZ 75SA 9mm - Angus trigger work

[krang]

LOve my 75B 9mm. Put my down for #56. :) If available.

[Rob1035]

I'll take #5 if available, as my CZ85B is coming soon;f

[Ed Ely]

Can I have Lucky # 7 please?

Ed

[dgludwig]

Count me in! 4570

[TexasGlock23]

***UPDATED***

[hillst1]

I have a P-01 and a PCR. I will take #69. 9mm going both ways!!!

[sgtred]

I would love to have number 40.

Scott

[seamus]

I have a 75bd, pcr and compact 40. How about 327 for my # please.

[Polo]

#8 is requested

I proudly own an older "Czechoslovakia-made" CZ-75 and an awesome 40P

[tombo]

I've got three (P-01, 75D Compact and 75 SA) + the t-shirt. So I guess I'm one too.

[msc]

I've got a P-01. Can I have lucky #13?

[Atlasx]

I'd like 000 please just for fun

good shootin'
Atlasx:)

[Cuda]

I'm not a fanatic yet, I've never even shot a CZ, but I've been wanting to get an all metal 9mm, and after reading up a lot and all the good reviews I just ordered a CZ 75B SA, it should be in next week and I will let you know if I'm a fan or not, but reserve #1975 for me.

[volkstrm]

Originally posted by TexasGlock23
Well I figured we could start the # system here also. I'll start off as #1. Let's fill it in CZ Fanatics!

List as follows:

1.TexasGlock23
2.SonnyD
3.12 Volt Man
4.smurph
5.Rob1035
6.AZnine
7.Ed Ely
9.dirksterg30
10.atcdoug
12.Dobber
14.Sqalbra76
44.22/45
50.rhkirk1
56.krang
67.cpirtle
75.4eyes
76.c00p
85.donbubbo
97.Blankwaffe
101.Kiddo
239.acpk9eod
515.aubie515
666.muscogee
1000.Butcher
1384.epsylum
4570.dgludwig
4075.m2hmghb volkstrm1945

[volkstrm]

i would like,
volkstrm,1945

[TexasGlock23]

Hello there, I'll update it tomorrow, anything else I can do for a fellow CZ Fanatic? Oh and sorry to break it to you guys, the CZ fell through. The dealer has be diking around and I am moving on. I think my g/f is going with a S&W CS9. But hopefully soon I can fins a good deal on a used CZ.

Jared

[TexasGlock23]

Jesus, any patience anymore?

[TexasGlock23]

**UPDATED**

[TexasGlock23]

This should be a sticky! But I am handing down this role to whoever wants it as I did not get the RAMI. Gun store screwed around too long so I bought a CS9. That is too bad, I will eventually buy one when time permits.

Jared

[breeze15]

I would be very honored to be able to have #15
breeze15

[Roogalator]

<---- Would like #555 if it's available.

My CZ collection:

CZ-75B
CZ-97B
CZ-550 American .308
CZ-83
CZ-75 PCR

[breeze15]

my misunderstanding

[CZ75]

Anybody checked my name? :rollsmiley: :supergrin: :supergrin:

CZ

[Ebb27]

I've got a few,

CZ-75(pre-B)
CZ-40B
CZ-52(two of them)

If you're still doing numbers I'd like 63.

[boogalou]

Put me down for #190

CZ75B, CZ40B, PCR, & a couple of CZ PreB's.

[JackSkellington]

#90 thank you :supergrin: :rollsmiley: :supergrin:

[SonnyD]

Guy's TexasGlock23 PM'd me a while back and wanted to know if I'd take this over, and I said I would, but I never received any info. on how he was doing it! I don't have a list of everyones numbers, or feel like I have the authority to give out numbers. He got the ball rolling on this forum. Right now I guess we are in a Freeze mode, sorry for any inconvenience.

Regards Sonny

[CHIEF MAC]

http://i54.photobucket.com/albums/g93/rmcsmac/IMG_0050.jpg

[CHIEF MAC]

http://i54.photobucket.com/albums/g93/rmcsmac/IMG_0076.jpg

[Glock30 CCW]

I'll take Fiddy-Five!
55!

[kemosabe]

I'll take 1948.:cool:

[Rally Vincent]

001 taken?

I don't think anyone is a bigger CZ fan here than me.

:P :P :P :P :P :P :P :P :P :P

[Yar]

May I have 1182

[wlchase]

Please, sir, may I have 42, sir? :rollsmiley:

B