Shotgun porn

[Dalton Wayne]

here is mine
http://pixpipeline.com/s/76333a111229.jpg (http://pixpipeline.com/d/76333a111229.jpg)

[cabal_88]

Here are a few of mine:

http://i23.photobucket.com/albums/b391/cabal_88/Guns/Big3.jpg

[Mighty HD]

Rem 870 HD. In a week or so it'll have a nice sling on it.

http://i2.photobucket.com/albums/y28/MightyHd/Image2.jpg

I may sell the side saddle and get buttstock sock.

[Grim Jackal]

http://i115.photobucket.com/albums/n297/Tacoma5sd/BenelliM1.jpg

[Grim Jackal]

http://i115.photobucket.com/albums/n297/Tacoma5sd/BenelliM1Front.jpg

[Keith5579]

Mossberg 590A1 and Remington 870

http://i35.photobucket.com/albums/d155/keith5579/asstguns013.jpg

[Mighty HD]

What kind of sling attachment do you have on the top gun?

I need to get one for the 870hd

[bunch_G17]

http://i4.photobucket.com/albums/y131/bunchjonathan/qaz.jpg

[Randy Dandy]

Mossy Mariner:

http://i2.photobucket.com/albums/y18/gomex/PISTOLGRIP.bmp

[bunchok]

Here's mine: Winchester 1300 with Hogue stock and forend, Allen butt cuff, and a Surefire G2 with a Z32 bezel and tape switch.
http://img.photobucket.com/albums/v428/MarkTex/DCP_08741.jpg

[tacshooter]

NEF Pardner 870 - EXCELLENT GUN, EXCELLENT VALUE, EXCELLENT PRICE!!

Speedfeed 13" LOP Stock
Esstac Velcro Sidesaddles - coyote brown
Streamlight M3 Mount (sans M3 - on G19)
BSA Redot RD30 (the good one) on rail
Oh, excuse the duct taped buttcuff - now gone and replaced with Eagle Cuff

http://pic4.picturetrail.com/VOL775/4424444/9356499/131917451.jpg

Range pic after two snap shots and three aimed shots with Brenneke Tactical Slugs.

http://pic4.picturetrail.com/VOL775/4424444/9356499/132436280.jpg

Have a shotty day!

[ghstface38]

http://x10.putfile.com/3/6922264577.jpg
http://x10.putfile.com/3/6922270226.jpg
http://x10.putfile.com/3/6922272749.jpg
http://x10.putfile.com/3/6922274246.jpg
http://x10.putfile.com/3/6922275725.jpg

Sorry the pictures are so crappy, I don't have any fancy equipment or steady hands.

Remington 870- Sidesaddle, Pistol grip stock, Blackhawk 3 point sling
RRA Entry Tactical- Specter Single point sling
Glock 23- Hogue Handall, Meprolight NS

P.S. I thought this was kind of a cool picture, wish it was a bit brighter, might make a good background.
http://x10.putfile.com/3/6922260261.jpg

[dirksterG30]

Here's my Mossberg 500 with a Specter sling & 6 round side saddle (it now has ghost-ring sights on):
http://i6.photobucket.com/albums/y217/dirksterg30/general%20guns/Mossberg500w-sling.jpg

[AggieMM]

http://www.woodfam.com/forums/myguns_4923b.jpg

- Winchester 1300 Defender
- Winchester 1400 MKII
- Glock 17

Ryan

[Cryhavoc]

Here is a shot of my latest build

[Soldat]

My baby.

http://img.photobucket.com/albums/v246/recoiljunkie/IMG_0229.jpg

Benelli M1S90 w/ghost ring night sights, 8rnd ext, oversized charging handle, and butt cuff. Jury is still out on a surfire forend.

I keep it by the bed for things that go bump in the night. ;)

[epsylum]

.

[clutch]

AggieMM I've shot some trap and game birds with a 1400 and they are sweet shooters! epsylum those 1100's are awesome! that will probably be my next trap gun.(or a franchi, but don't tell my dad I was raised Winchester)
-Brian

[AggieMM]

Originally posted by clutch
AggieMM I've shot some trap and game birds with a 1400 and they are sweet shooters! epsylum those 1100's are awesome! that will probably be my next trap gun.(or a franchi, but don't tell my dad I was raised Winchester)
-Brian

The 1400 was a recent gift from my father-in-law, so I'm new to the world of trap. Did ok my first time out, 1400 worked great, can't blame the gun, the misses were all user error..... :) But both of my Winchesters work great.

Ryan

[mike23]

Originally posted by Dalton Wayne
here is mine

Dalton,

Nice pic...where did you get the bayonet mount for the 870? Looks great!

[Black_Talon]

I'm a real sucker for riot guns. They may not be "tacticool", but they'll all get the job done:

1975 Rem 870P:
http://www.black-talon.org/RKBA/SG/870P_1975_FT_03_0800.jpg

1972 Ithaca M37:
http://www.black-talon.org/RKBA/SG/Ithaca_M37_800.jpg

Two High Standard 8111 Flite Kings ('75 & '76) and a 1970 8113:
http://www.black-talon.org/RKBA/SG/3x_Hi-Std_0800.jpg

[irishbum]

mine

[gruntmedik]

Originally posted by RA45T
I'm a real sucker for riot guns. They may not be "tacticool", but they'll all get the job done:

1972 Ithaca M37:
http://www.black-talon.org/RKBA/SG/Ithaca_M37_800.jpg


:drool:

[GeorgiaGlockMan]

here is my 870 police

the action is as smooth as silk

[smoke]

Originally posted by bunch_G17
http://i4.photobucket.com/albums/y131/bunchjonathan/qaz.jpg

What type of forearm is that?

[Westicle]

My Three Shotguns :)

so different and yet so alike.... the 14" one has a +1 wilson extension on it now though.

http://www.hunt101.com/img/357639-big.JPG

http://www.hunt101.com/img/357637-big.JPG

http://www.hunt101.com/img/403977-big.JPG

[Wicked96SS]

Here is my FN Police Tactical with C-More red dot... I use this for 3 gun matches. It groups better than any shotgun I have ever shot with Remmington reduced recoil 00 buck...

http://guns.wicked96ss.com/fnh_police_tactical/thumbs_d/mi_fnh_police_tactical4_3_jpg.jpg

http://guns.wicked96ss.com/fnh_police_tactical/thumbs_d/mi_fnh_police_tactical1_3_jpg.jpg

[salvo]

Lot's of nice shotguns you got there guys!
Heres my HD 590A1

http://i33.photobucket.com/albums/d71/SeaOx/Guns/MVC-031F.jpg

[Short Cut]

Another 1100 CM

http://home.comcast.net/~1911brass/HD_Shotgun.jpg

[gunman_23]

My Remington 870 and NoSuchStudio's Mossberg 590

http://i39.photobucket.com/albums/e186/gunman_23/5cf2ed05.jpg

http://i39.photobucket.com/albums/e186/gunman_23/9148efc4.jpg

[Black_Talon]

A couple more of my Ithaca 37s:
http://www.black-talon.org/RKBA/SG/M37_x2_1000.jpg

[wishywashy]

Here's my pet Remy

http://img.photobucket.com/albums/v414/danceswithbow/shotgun.jpg

[CAAT2]

Here's my 870 Marine magnum. So far i've fired 80 rnds of mixed birdshot, buck and slug rnds. Shoulder was bruised at the end of the session but still love it.

http://i15.photobucket.com/albums/a368/CAAT1/Marinemagnum870039.jpg

[870pilot]

http://i22.photobucket.com/albums/b329/remington870pilot/speedfeedb.jpg

from duck gun in gun shop to HD SG... lovin the 11-87 remmy

[OEF_VET]

A recent pic of my shotguns:
http://www.thehighroad.org/attachment.php?attachmentid=41604&d=1151514699

[Epizza]

Originally posted by CAAT2
Here's my 870 Marine magnum. So far i've fired 80 rnds of mixed birdshot, buck and slug rnds. Shoulder was bruised at the end of the session but still love it.

http://i15.photobucket.com/albums/a368/CAAT1/Marinemagnum870039.jpg

I like it! Where did you get your front FO sight? I can't seem to find any for shotguns without the rib.

[CAAT2]

Thanks, Epizza. I bought the gun used and it came with it. Never new where the previous owner got it. I actually removed this from the gun. It moves with a slight nudge, so it's not that stable. It is just a clip on plastic sight. I say stick to the bead sight.

I see you like SKS yugo too. here's mine with the MM.
:)
http://i15.photobucket.com/albums/a368/CAAT1/270c88a7.jpg

[Rob1035]

my 500a
http://www.hunt101.com/img/424964-big.JPG (http://www.hunt101.com/?p=424964&c=500&z=1)
http://www.hunt101.com/img/424965-big.JPG (http://www.hunt101.com/?p=424965&c=500&z=1)

[epsylum]

Newer pic.

The 1100 is gone now, however.

http://www.photodump.com/direct/epsylum/MyLongGuns5-17-06a.jpg

[Rob1035]

why'd you get rid of the 1100? Redundant having both that and the Saiga I suppose...

[HardHead]

http://i14.photobucket.com/albums/a312/tharden/MM_6.jpg

http://i14.photobucket.com/albums/a312/tharden/MM_4.jpg

[epsylum]

Originally posted by Rob1035
why'd you get rid of the 1100? Redundant having both that and the Saiga I suppose...

I was having rust issues and I like my Saiga more.

I want to get an FN SLP some day. It has an aluminum reciever so it won't rust on me. BTW it is something with the oil in my skin. I make things rust REALLY fast. So I have started putting rust resistance high on my list. I already sold my blued Ruger MkII for a stainless MkII, have a stainless witness match (well at least the frame is and the slide is holding up really well), want a stainless 1911, etc.

My Glocks refuse to rust no matter how badly I treat them. One reason why I love them.

BTW I am making my reloading dies rust also. :frown: It is like the reverse of the midas touch. Everything I touch turns to rust, not gold. ;)

[Black_Talon]

Finally got around to getting most of my SGs into one place at the same time:

http://www.black-talon.org/RKBA/SG/SG's_x9_0900.jpg

From the top:

1) 1975 Rem 870P.

2) 1970 High Standard 8113 from Allen County PD in Indiana.

3) Ithaca 37 "Homeland Security" from 2003.

4) Ithaca 37 "Homeland Security" from 2003.

5) 1980 Ithaca 37 "M&P" from Snohomish County SO.

6) 1973 Ithaca Deerslayer.

7) 1965 Ithaca 37 M&P 'trench" from Acadia Parish PD.

8) 1967 Ithaca 37 DSPS LAPD.

9) 1983 Stevens 311R.

[SDS knife guy]

Epizza, those clip on fiber optic sights are available from BassProShop and probably Brownells. I think they are about $20.

I have one that clips onto the vent rib and it's pretty decent. Not great for precisio work, but I like it for hunting. It's easy to pick up that front sight with it in place.

[Epizza]

Thanks SDS:)

[Packin' Heat]

HERE (http://home.comcast.net/~hpacevedo/guns/P8098074small.jpg)

in the middle... Mossberg 590; 18.5"; ghostring; knoxx comp stock, hogue forend ;side saddle; Surefire G2 with pressure switch.

[Glockman1000]

My Benelli M4 11707
http://img.photobucket.com/albums/v238/Gixerman1000/Long%20guns/BenelliM411707pic2.jpg

[BSaunders]

My new baby!!

[BSaunders]

http://i103.photobucket.com/albums/m150/BSaunders_2006/remmy870.jpg
My new baby!!

[zzzarkt]

Originally posted by epsylum
BTW I am making my reloading dies rust also. :frown: It is like the reverse of the midas touch. Everything I touch turns to rust, not gold. ;)

You might want to try THESE (http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=154282) (link).

They were made for keeping many small metal parts (dies etc.) from rusting. I use them in pistol cases and scattered a few in my safe. No rust yet.

[epsylum]

Originally posted by zzzarkt
You might want to try THESE (http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=154282) (link).

They were made for keeping many small metal parts (dies etc.) from rusting. I use them in pistol cases and scattered a few in my safe. No rust yet.

Added to my wish list. Thanks.

[Packin' Heat]

Originally posted by Wicked96SS
Here is my FN Police Tactical with C-More red dot... I use this for 3 gun matches. It groups better than any shotgun I have ever shot with Remmington reduced recoil 00 buck...

http://guns.wicked96ss.com/fnh_police_tactical/thumbs_d/mi_fnh_police_tactical4_3_jpg.jpg

http://guns.wicked96ss.com/fnh_police_tactical/thumbs_d/mi_fnh_police_tactical1_3_jpg.jpg


2 questions:

1) is there any difference between the FN SLP and yours besides the grip/stock stuff?

2) what does the forend feel like? by that i mean when you actuate the weapon, is it tight, smooth, quick? is there any play at all?

[glockmeister71]

Originally posted by Wicked96SS
http://guns.wicked96ss.com/fnh_police_tactical/thumbs_d/mi_fnh_police_tactical4_3_jpg.jpg

http://guns.wicked96ss.com/fnh_police_tactical/thumbs_d/mi_fnh_police_tactical1_3_jpg.jpg

Damn I love the way those guns look.I absolutely have no need for another shotgun,but I'd really like to get one of those.

[epsylum]

Originally posted by Packin' Heat
2 questions:

1) is there any difference between the FN SLP and yours besides the grip/stock stuff?

I can answer this one. Yes, the SLP is an auto (Winchester Super X2 based) this one is a pump (Winnie 1300 based).

[Packin' Heat]

Originally posted by epsylum
I can answer this one. Yes, the SLP is an auto (Winchester Super X2 based) this one is a pump (Winnie 1300 based).


oh...heh thanks. my brain skipped a beat. i think what i meant to ask was, the regular FN police shotgun as seen HERE (http://www.impactguns.com/store/17674.html)

[epsylum]

Originally posted by Packin' Heat
oh...heh thanks. my brain skipped a beat. i think what i meant to ask was, the regular FN police shotgun as seen HERE (http://www.impactguns.com/store/17674.html)

In that case I am going to have to say the furniture and sights etc. are different.

[Packin' Heat]

Originally posted by epsylum
In that case I am going to have to say the furniture and sights etc. are different.

hmmmm well thats god to know. i was just wanting to make sure that the "tactical" didnt have any real significant mechanical/functionality differences. the reason i ask is becauce if i got one of those standard FN's, I'd like to go the knoxx SpecOPs stock route. so that way i'd have pretty much the same weapon, except with the recoil absorbing ability. sans the raised sights of course.

[stiletto raggio]

I'll tell you, the stock and M16 style sights on the TPS make a big difference. I was able to break 19 out of 25 in 16 yard trap with one the first time I shot it. It points instinctively and, even with cheap slugs, makes some very solid groups out to 50 yards. I would recommend a rubber butt pad for the M4 type stock, but those are easy to find and really do all you need for recoil management.

Mine came with a C-More, and it makes a big difference as well. Now all I need is a light.

[stiletto raggio]

http://www.gunbroker.com/Auction/ViewItem.asp?Item=54839759

Highly recommended. The C-More is set up specifically for this gun.

[SW.FLA.glocker]

Here is mine on the bottom of the pic.

[epsylum]

Update on page 4

[stiletto raggio]

Epsylum,

Did you do that yourself? If so, how long would you say all of the conversions took? I'd love to have a carbon copy of yours, or at least pull off a decent conversion, so can you list your mods and the hardware added?

[epsylum]

Originally posted by stiletto raggio
Epsylum,

Did you do that yourself? If so, how long would you say all of the conversions took? I'd love to have a carbon copy of yours, or at least pull off a decent conversion, so can you list your mods and the hardware added?

NO WAY! It would have looked like my 4 year old nephew attempted it if I did it. :supergrin:

The whole conversion was done by Tony @ www.tromix.com . His work surpasses the factory and well worth the money I paid him. I then just added doohickies (mag, side rail, sling, Kobra). Take the doohickies off and it is exactly as I got it from Tony.

A base conversion from Tony is $350. But that $350 pays for A LOT of work (a VERY well done conversion, ACE sidefolder, Tapco FCG to make it nice and legal and also helps the trigger feel, Tapco SAW grip, Tromix made winter trigger guard, barrel cut to any length, gas ports modified to ensure reliable cycling with new barrel length, all holes TIG welded up, refinished, etc. etc.). My only options were a manual bolt hold open and the Tromix made pointed flash hider (sharp enough to easily cut). Also after the conversion you can put any stock on it that is made for a stamped AK reciever as he cuts the angled Saiga reciver, machines it to be flat (like an AK), and welds in a new reciever block with the conversion.

I cannot recommend him enough. Tony is flat out the man when it comes to Saigas.

[1811guy2]

Originally posted by Glockman1000
My Benelli M4 11707
http://img.photobucket.com/albums/v238/Gixerman1000/Long%20guns/BenelliM411707pic2.jpg

That a damn nice shotgun right there!

[kf4zra]

I did my first saiga conversion this week, took about 5 hours, and about $180 in parts. came out great, welded up the holes, used a double hook trigger instead of the factory single hook one.

im having a friend do a unique design door breacher/shot spreader design on his CNC machine. once i have that and the AK style front sight, ill have exactly what i want.

[epsylum]

Originally posted by kf4zra
I did my first saiga conversion this week, took about 5 hours, and about $180 in parts. came out great, welded up the holes, used a double hook trigger instead of the factory single hook one.

im having a friend do a unique design door breacher/shot spreader design on his CNC machine. once i have that and the AK style front sight, ill have exactly what i want.

Sounds great. Post pics when you are done. If I wasn't waaiting for the Halo quadrail w/ built in sights, I would go the AK sights route. I love it when they put the AK rear sight block in. It just looks so..... well, "right" I guess.

;)

[bburgi]

<img src="http://i2.photobucket.com/albums/y19/bburgi/Other%20Pictures/mossy_500.jpg">
Mossberg 500a, 18" Barrel, Butt-stock shell saddle

<img src="http://i2.photobucket.com/albums/y19/bburgi/Other%20Pictures/collection2.jpg">
And the rest of the collection.

[KingRufus]

here's my current set up went all gunshop commando on it. I only added the ar stock cuz I try to get as many new shooters to play as possible.

[KingRufus]

8 in & two reloads=24 shells kinda dissapointing i can't hang one more on the hold a whole box of 25.:supergrin:

[irishbum]

remove the pad on the butt stock 1 moe fits in there perfectly my friend. you have you're 25;) I had one kept one of the novelty flame thrower's shoot's a huge flame (be careful of what's around you nothing with in about 200 ft)quite a nice surprise for your new shooters.

[JJinORE]

My Remington 870 with extended mag and Maverick 88, now all I'm missing is the Benelli that i've been eyeballin'

<a href="http://photobucket.com/" target="_blank"><img src="http://i4.photobucket.com/albums/y135/bullseye74/shotguns.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>

[B A]

Took a Mossy 500A with a 28" barrel. Changed out to a 20" with a 8 shot tube. Keeping the wood stock and grip. Love the old school look.


BA
http://img.photobucket.com/albums/v721/baharp/MossyS3.jpg

[Alaskapopo]

14 inch Vang Comped 870 with Rogard finish on outside NP3 inside, Giles sling, Surefire foreend, MMC sights, Speed feed stock, Side Saddle,

http://i59.photobucket.com/albums/g299/355sigfan/shotguns/IM000788.jpg

[OSSI]

We can't have pumps here.
So this one is my tactical one

Breda o/u 16" Barrel

[OSSI]

Wetherby Orion

[OSSI]

and Winchester 37A

[epsylum]

Man OSSI that Weatherby is a sweet looking gun.

[OSSI]

Originally posted by epsylum
Man OSSI that Weatherby is a sweet looking gun.

Thanks:)

And as I said we can't have pump actions here. But we can levers
So , I try to get one of those. It's a 5+1

Isn't the law funny:upeyes:

[Mr Roger]

Hi!

Here is a contribution from Europe. I was a little bit inspired
of "bunch_G17" work.

It´s an Rem 870 with an mesa telescoping stock and some more goodies.

Cheers
Roger

[nvtaz]

:banana:

[Warp]

http://i54.photobucket.com/albums/g105/austin3161324/shotgun.jpg

[Noah]

Mossberg 590 Mariner, compact mode..

[Noah]

.

[epsylum]

Update

I have created one evil shottie if you ask me. I was going for the "make Sarah Brady crap her pants" look. :rock:

Tromix converted Saiga 12 w/ Halo quadrail and Aimpoint CompM.

http://www.photodump.com/direct/epsylum/Saiga12-210-5-06a.jpg

http://www.photodump.com/direct/epsylum/Saiga1210-5-06a.jpg

BTW the rail is not actually tan, but a funky anodized color that came out more greyish than black. It will be Duracoated matte black in the future.

[CAAT2]

epsylum, that is a very nice shotgun! It is evil indeed and i like it. Thanks for posting it.

[SomeGuyInAHat]

This is my Boomstick!!

http://members.cox.net/someguyinahat/boomstick.JPG

Just got this 870P on Tuesday. I will be giving it the tacticalization treatment.

[Packin' Heat]

Originally posted by epsylum

Tromix converted Saiga 12 w/ Halo quadrail and Aimpoint CompM.

http://www.photodump.com/direct/epsylum/Saiga12-210-5-06a.jpg



thats one sic saiga! I'm thinking about going the saiga route for my next shotty mainly cuz I love my VEPR AK, but I was looking at the tromix list of options and frankly dont know what to pick. I feel pretty retarded.

If you didnt have the Aimpoint on it, are your iron sights provided by the halo?

[epsylum]

Originally posted by Packin' Heat
thats one sic saiga! I'm thinking about going the saiga route for my next shotty mainly cuz I love my VEPR AK, but I was looking at the tromix list of options and frankly dont know what to pick. I feel pretty retarded.

If you didnt have the Aimpoint on it, are your iron sights provided by the halo?

Thanks!

There are adjustable ghostring sights built into the top rail. One flip of the ARMS throwlever and the Aimpoint is off and the irons are good to go. I plan to put an EOTech on it here soon though. It is a pretty slick unit and I highly recommend it (the rail that is). He says he isn't making too many of them though.

BTW my Saiga is far from done. Just going one step at a time. :)

Re: the options on Tromix website, just e-mail Tony. He is a good guy and answers all of your questions without making you feel dumb (I know, I had many myself). He conversions are top notch and when you see what he does and find out what all he does to make sure they are the best possible conversions, that $350 for a base conversion sounds like a steal.

[kazecap0ne]

Originally posted by epsylum
Thanks!

There are adjustable ghostring sights built into the top rail. One flip of the ARMS throwlever and the Aimpoint is off and the irons are good to go. I plan to put an EOTech on it here soon though. It is a pretty slick unit and I highly recommend it (the rail that is). He says he isn't making too many of them though.

BTW my Saiga is far from done. Just going one step at a time. :)

Re: the options on Tromix website, just e-mail Tony. He is a good guy and answers all of your questions without making you feel dumb (I know, I had many myself). He conversions are top notch and when you see what he does and find out what all he does to make sure they are the best possible conversions, that $350 for a base conversion sounds like a steal.

anyone have any opinions on the Tromix .458 socom monster sledgehammer rifle? been looking into buying my first AR-15 but this thing looks AMAZING . i probably should post this on the AR-15 board but theres already talk about that website here.

[Yar]

http://madtrigger.com/images/gats/870%20surefire.jpg

http://madtrigger.com/images/gats/1100%20Carlock.jpg

[smoke]

Hey Yar,

Where'd you get that do-hickie on the side of the 1100 that holds the 2 extra shells?

Thanx!

[Yar]

It's made by 3gungear.com though it is easiest to get them from dillon precision. It's in the dillon catelog but not their web site so you'll have to call them. It is damn near impossible to order anything from 3gungear for whatever reason.

[stiletto raggio]

Originally posted by OSSI
Thanks:)

And as I said we can't have pump actions here. But we can levers
So , I try to get one of those. It's a 5+1

Isn't the law funny:upeyes:

Try to get one from Coyote Clapp. They are refined quite a bit from the standard chinese knockoff and cost very little more.

[Lee-online]

i have a regular 870 express, but i wouldn't mind having this......

Deleted image, too much porn and not enough shotgun.

[jato]

http://img.photobucket.com/albums/v337/jatoman/home870.jpg

[Boondock Saint]

Here are my babies. They are old, reliable, tough as hell, and a pleasure to shoot.

http://i2.photobucket.com/albums/y37/Hillbillywolf/Survival2001.jpg

[BossHogg]

http://i14.photobucket.com/albums/a312/tharden/IMG_2077.jpg

[10-32]

Originally posted by ghstface38


P.S. I thought this was kind of a cool picture, wish it was a bit brighter, might make a good background.
http://x10.putfile.com/3/6922260261.jpg


How's this?

http://i85.photobucket.com/albums/k45/10-32_79/6922260261.jpg

[USMC03Grunt]

Here's a few of mine

http://i137.photobucket.com/albums/q236/USMCGruntUSAFCATM/Firearms/Shotguns/IthacaM-37.jpg
Ithaca M-37

http://i137.photobucket.com/albums/q236/USMCGruntUSAFCATM/Firearms/Shotguns/MossbergM-500.jpg
Mossberg 500

http://i137.photobucket.com/albums/q236/USMCGruntUSAFCATM/Firearms/Shotguns/Remington870FoldingStock.jpg
Remington 870 with factory folding stock

http://i137.photobucket.com/albums/q236/USMCGruntUSAFCATM/Firearms/Shotguns/Remington870Tactical.jpg
Remington 870

http://i137.photobucket.com/albums/q236/USMCGruntUSAFCATM/Firearms/Shotguns/Norinco1897Trenchgun.jpg
Norinco 1897 Trench gun

[gak]

My wife and I share these, when she lets me:;)
.
http://i81.photobucket.com/albums/j234/gakk/870.jpg
http://i81.photobucket.com/albums/j234/gakk/eo.jpg

[Guns & Cockpits]

Hey gak, in the bottom photo, what is the red dot you have on that shottie mounted to? I'm looking for a very similar setup to what you have there, but am having a hard time finding mounts for sights for a shotgun.

[Yar]

That's a Eotech. Very popular for AR-15's but it doesn't look like you could get a cheek weld with it on a shotgun. For shotguns the open class 3 gun guys run jpoints or doctors melted into the rib. Check out jprifles.com (http://www.jprifles.com) and look un jpoint. There are pictures of the jp shotgun mount.

[gak]

Originally posted by Guns & Cockpits
Hey gak, in the bottom photo, what is the red dot you have on that shottie mounted to? I'm looking for a very similar setup to what you have there, but am having a hard time finding mounts for sights for a shotgun.

Ya Eotech 552, takes 2 x AA batteries, lithium or regular. Very easy to shoot slugs that way. For long range I use an extended eye relief scope, winchester power point foster and winchester sabot slugs are very accurate.

The easiest way to mount (assuming you don't want to drill the receiver) is to use an aftermarket cantilever barrel, that way you'll never lose zero. Second best way is remington aftermarket b-square mount, just don't tighten the front screw too much or you squeeze your receiver and that can cause jams.

[Guns & Cockpits]

Thanks a lot to my new three lettered named friends. What gak has there is pretty much what I'm looking for as a present to myself for Christmas this year, but I want the mount especially.

Thanks again.

[eddief4]

Originally posted by gak
My wife and I share these, when she lets me:;)
.
http://i81.photobucket.com/albums/j234/gakk/870.jpg
http://i81.photobucket.com/albums/j234/gakk/eo.jpg


:animlol:

[Britt]

Originally posted by epsylum
I was going for the "make Sarah Brady crap her pants" look. :rock:



I think you created the "make Britt get a stiffy in his pants" look:thumbsup:

[Sweet]

http://img81.imageshack.us/img81/8443/sgoh2.jpg

http://img81.imageshack.us/img81/2281/riflett3.jpg

[windplex]

Have a rem 870 deer model 12/20 coming in and want to add the 8 round tube and spring kit. Parkerized seems logical for $2 more.

Anything I should know about doing vonversion myself?

Sweet -- nice pig stickers!

What was that nice lever action? 45-70?

[Sweet]

Originally posted by windplex
Have a rem 870 deer model 12/20 coming in and want to add the 8 round tube and spring kit. Parkerized seems logical for $2 more.

Anything I should know about doing vonversion myself?

Sweet -- nice pig stickers!

What was that nice lever action? 45-70?

Thanks! The lever is the Winchester 9410 Traditional...always fun showing up at Coyote Valley Sporting Clays with my 410 bore lever:thumbsup: the looks I get :rofl:

[Rawny]

Here's my Beretta 1201FP3 "Marino":

http://i5.photobucket.com/albums/y156/rawny/Beretta/120120.jpg

...with his little cousins:

http://i5.photobucket.com/albums/y156/rawny/Beretta/Berettas.jpg

[windplex]

Originally posted by Sweet
Thanks! The lever is the Winchester 9410 Traditional...always fun showing up at Coyote Valley Sporting Clays with my 410 bore lever:thumbsup: the looks I get :rofl:

What else will it shoot besides 410s???

[Pitt]

Originally posted by Sweet
http://img81.imageshack.us/img81/8443/sgoh2.jpg

http://img81.imageshack.us/img81/2281/riflett3.jpg


Nice shottie, but who makes that double edged fighter?

[Sweet]

Windplex...only thing it shoots is any 2 1/2" slug, shot, buck, etc in 410 bore

Pitt...the double edged is made by Barry Dawson http://www.dawsonknives.com/ one of the nicest knife makers I have dealt with...since 91'

Rawny...:thumbsup:

[BigFatDog]

A family pic from this morning's range session...

http://img145.imageshack.us/img145/8203/fromclipboardqt0.jpg

[zzdroptop]

No shotgun porn would be complete without an S12...come get some

S12 conversion with 10rd APG mag
http://img294.imageshack.us/img294/465/p1010083ms0.jpg

[ElevatedThreat]

Originally posted by Black_Talon
I'm a real sucker for riot guns. They may not be "tacticool", but they'll all get the job done:

1975 Rem 870P:
http://www.black-talon.org/RKBA/SG/870P_1975_FT_03_0800.jpg

1972 Ithaca M37:
http://www.black-talon.org/RKBA/SG/Ithaca_M37_800.jpg

Two High Standard 8111 Flite Kings ('75 & '76) and a 1970 8113:
http://www.black-talon.org/RKBA/SG/3x_Hi-Std_0800.jpg

These simple, straight-forward riot guns are some of the more practical that I have seen on this thread. I think I'd rather "repel borders" with these timeless guns than a lot of the more Tacticool guns out there!

The older I get, the more I like my guns simple and clean -- just night-sights and maybe a 2-round mag extension....

-ET

[windplex]

Regarding the 3 High Standard 8111 Flite Kings:

These look like they are dedicated manufacture from he ends that attach the magazine tube to the barrel. And less like modular weapons of today. Makes me think they are more robust.

Thanks for sharing these vintage shotguns! Windplex

[Black_Talon]

Originally posted by windplex
Regarding the 3 High Standard 8111 Flite Kings:

These look like they are dedicated manufacture from he ends that attach the magazine tube to the barrel. And less like modular weapons of today. Makes me think they are more robust.

Yeah, the Flite Kings are built like tanks. The barrels are threaded into the receivers so they will take a lot of abuse and keep on ticking. About the only downside is that cleaning/disassembly takes longer.

[windplex]

Originally posted by Black_Talon
Yeah, the Flite Kings are built like tanks. The barrels are threaded into the receivers so they will take a lot of abuse and keep on ticking. About the only downside is that cleaning/disassembly takes longer.

I did not know about the threading. However I did notice the barrel-tube attchment method and it looks very robust compared to todays brackets.

I do like the modularity of todays shot guns and yet the simplicity and robust build of these is also very appealing. Plus you have taken great care of them!

[windplex]

Originally posted by ElevatedThreat
These simple, straight-forward riot guns are some of the more practical that I have seen on this thread. I think I'd rather "repel borders" with these timeless guns than a lot of the more Tacticool guns out there!

The older I get, the more I like my guns simple and clean -- just night-sights and maybe a 2-round mag extension....

-ET

Elevated, You have me intrigued with the Flight King riot guns!

If I come across one of these "High Standard 8111 Flite King riot guns" at a show, as you have shown us, how can I tell if it is in good shape to buy?

Thank you very much! Windplex

[Black_Talon]

Originally posted by windplex


If I come across one of these "High Standard 8111 Flite King riot guns" at a show, as you have shown us, how can I tell if it is in good shape to buy?

They're built like tanks, you really can't wear them out. They're effectively indestructible, and if you do manage to wear out/break something, the parts are easily replaceable. Other than something like a bulged/bent barrel, a bent mag tube or a badly cracked stock I can't really think of any other issues that would be a potential problem.

[OEF_VET]

Here's the Silliest Shotgun you'll ever see:
http://olegvolk.net/gallery/d/17056-2/SBS5113.jpg

It's an NEF Pardner 12 gauge single-shot, registered as a Short-Barreled Shotgun, on a Form 2.

I was sitting around the shop one day, with a shotgun, an Adv. Tech. stock set, a machine shop, my twisted mind, a Type 07 FFL, and a Class 2 SOT. So, that's what you get, "The Beast."

She kicks like a mule, especially with 3" magnum slugs. With Aquila mini's, she's a kittycat, though.

The amazing thing is she's been sold to a local shop.

ETA: Did you know that you can't even spell the alternative to kittycat that begins with a p, even if you string the word together? How PC can we get? How many of us have always referred to a kitten as a p-u-s-s-y-c-a-t?

[windplex]

Originally posted by Black_Talon
They're built like tanks, you really can't wear them out. They're effectively indestructible, and if you do manage to wear out/break something, the parts are easily replaceable. Other than something like a bulged/bent barrel, a bent mag tube or a badly cracked stock I can't really think of any other issues that would be a potential problem.

Thank you Black_Talon! I will keep an eye out for one now. All the best! Windplex

[MAC_413]

My Wilson Combat

[windplex]

Originally posted by MAC_413
My Wilson Combat

MAC_413, nice weapon!

Did you send your in for upgrading or buy new from Wilson? If sent in how long did it take from mail to getting home again? Did you need to send through an FFL? Thank You! windplex

[amblackm]

Here are my Tac shotguns:

Remington 870 Police MAX:
http://img.photobucket.com/albums/v496/amblackm/Remington870PoliceMAX.jpg

Remington 870 Police Rifle Sights:
http://img.photobucket.com/albums/v496/amblackm/Remington870PoliceRifleSight.jpg

-Andrew

[MAC_413]

WINDPLEX, I bought it new. I had my gunstore order it and it took a little less then a month to get to them. It is a very nice gun and I belive it is worth the price. I have shot it and it is super smooth and dead on reliable.

[Sapperstang]

Just picked this one up. Benelli Nova pump w/ghost ring sights. Anyone know if benellis stock w/pistol grip can be put on this gun?

http://i13.photobucket.com/albums/a279/RTrone/Misc262.jpg

[amblackm]

Sapperstang, I'm sorry but the answer is no. You've got a regular Benelli Nova tactical there. If you look at your gun closely, the receiver and the stock are one piece and it is impossible to change out the stock for something else. The Benelli Super Nova is the model where the pistol grip stock becomes an option. This is because on the Super Nova the stock and receiver are two separate pieces. Don't worry about it though. The regular Nova is still a fine weapon.

-Andrew

[Sapperstang]

Originally posted by amblackm
Sapperstang, I'm sorry but the answer is no. You've got a regular Benelli Nova tactical there. If you look at your gun closely, the receiver and the stock are one piece and it is impossible to change out the stock for something else. The Benelli Super Nova is the model where the pistol grip stock becomes an option. This is because on the Super Nova the stock and receiver are two separate pieces. Don't worry about it though. The regular Nova is still a fine weapon.

-Andrew

I know what I have. Yeah I seee it's one piece now. Thanks.

[USP45T]

nice collection of benellis amblackm. where did you find the mag tube extension and barrel clamp? 4+1 capacity info from their website has got me leaning toward an FN SLP but the price is right for the novas. are you loving the short pull/stoke? seems nice.

[Nomaspescado]

Home defense...as in up close and personal, in your face kind of stuff, right?
<a href="http://photobucket.com/" target="_blank"><img src="http://i45.photobucket.com/albums/f82/nomaspescado/IMG_0579.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>

[amblackm]

Originally posted by USP45T
nice collection of benellis amblackm. where did you find the mag tube extension and barrel clamp? 4+1 capacity info from their website has got me leaning toward an FN SLP but the price is right for the novas. are you loving the short pull/stoke? seems nice.

Benelli doesn't seem to import their magazine extensions anymore. :sad: But, I've seen Tac Star extensions for the Nova on eBay for $40. If you've got more money to burn, look at www.surecycle.com. I don't know what the build quality is for either product, but at least they're out there.

If you can't tell from my collection, I absolutely love my Novas and SuperNovas. They fit me really well, the build quality is perfect, and I've never had a problem with any of them. They're super durable, reliable, and the build quality is perfect. The barrels are chrome lined and overbored from the factory, which is something you won't find on many other factory shotguns. Accuracy with slugs is amazing, and patterns are pretty tight for a riot style shotgun. It's also easy to disassemble and clean them. All in all, they're sweet shotguns. When you throw an extension on there, the capacity is 7+1 with 2 3/4" shells!

IMO, you should get a Nova or SuperNova! You won't be sorry.
-Andrew

[Buckaroo]

Originally posted by amblackm
Benelli doesn't seem to import their magazine extensions anymore. :sad: But, I've seen Tac Star extensions for the Nova on eBay for $40. If you've got more money to burn, look at www.surecycle.com I don't know what the build quality is for either product, but at least they're out there. -Andrew Fixed the link for you (took out the period)

[justcor]

Mossberg 590A1 w/Bayo
http://207.231.79.149/cory/guns2/images/DSC_0008.JPG

Wilson Combat w/Knoxx Stock
http://207.231.79.149/cory/guns2/images/DSC_0011.JPG

870 Marine Magnum w/Speedfeed stock
http://207.231.79.149/cory/guns2/images/DSC_0017.JPG

Mossberg 500 w/Knoxx Breacher grip
http://207.231.79.149/cory/guns2/images/DSC_0016.JPG

[Nomaspescado]

justcor,
I do love pistol grip shotguns...
Have you had a chance to use that BreechersGrip?
If so, how is it?
Can you compare it with any other grips? (from first hand experience, please)

I've been through five different ones before settling on the Hogue...but that was before the Knoxx was available.
Thanks,
Steve

[Walter45Auto]

Mossberg 590 Intimidator with bayonet lug (Can't find my bayonet right now.) and integral laser sight in the pump handle. Also pictured is my GLOCK 30 with Scherer 27 round mag.
http://i60.photobucket.com/albums/h17/Walter-45-Auto/GunPics032.jpg


:freak:






:reindeer: :50cal:

[Walter45Auto]

Same as above pictured with Olympic Arms AR15 with 40 rounder.
http://i60.photobucket.com/albums/h17/Walter-45-Auto/GunPics030.jpg


:freak:






:reindeer: :50cal:

[SDS knife guy]

Walter, mind if I ask where you got that grip for the Mossy?? A guy I work with is wanting on like that bad.

[OEF_VET]

SDS, Speedfeed makes those grips.

Here's a good source for them. (http://arizonagunrunners.com/Products/SpeedFeed/speedfeedpistolgrips/speedfeedpistolgrips.html)

[Walter45Auto]

Well, OEF beat me to it. I'm pretty sure I bought mine from Arizona Gunrunners, the link he posted. I like it a lot better than the regular pistol grip that was on it when I got it. It's A LOT more comfortable to shoot. I also have a full stock for it that I got at a gun show for $10.


:freak:






:reindeer: :50cal:

[Walter45Auto]

http://i60.photobucket.com/albums/h17/Walter-45-Auto/GunPics035.jpg


:freak:






:reindeer: :50cal:

[cmysprks]

heres my new shotty http://i107.photobucket.com/albums/m306/cmysprks/1227062139b.jpg

[Walter45Auto]

I've got a heat shield like that, but I decided I didn't like it on my gun.


:freak:






:reindeer: :50cal:

[windplex]

Anyone want to sell a used "Speedfeed III Tactical Magazine Stock"?

Picture: Rifle Stock with integrated pistol grip and place to store some extra shells in stock:

http://arizonagunrunners.com/Products/SpeedFeed/speedfeed3tacticalmagtss/speedfeed3tacticalmagtss.html

[cmysprks]

<a href="http://photobucket.com/" target="_blank"><img src="http://i107.photobucket.com/albums/m306/cmysprks/0119072052.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>
<a href="http://photobucket.com/" target="_blank"><img src="http://i107.photobucket.com/albums/m306/cmysprks/0119072054.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>
<a href="http://photobucket.com/" target="_blank"><img src="http://i107.photobucket.com/albums/m306/cmysprks/0119072053b.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>
<a href="http://photobucket.com/" target="_blank"><img src="http://i107.photobucket.com/albums/m306/cmysprks/0119072053a.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>

[cmysprks]

<a href="http://photobucket.com/" target="_blank"><img src="http://i107.photobucket.com/albums/m306/cmysprks/P1010863.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>

[SDGlock23]

Nothing fancy, just my Good ole retrofitted 870 Express Super Magnum.

http://i13.photobucket.com/albums/a289/sdmf69/chewsumtwat.jpg

[kf4zra]

Here she is, still a work in progress. want to shorten the barrel up so when i solder on the door breacher its 18.5" long. also need to add a 10rd mag if i could ever find one


Before:
http://i78.photobucket.com/albums/j89/kf4zra/sig123.jpg



Currently:
http://i78.photobucket.com/albums/j89/kf4zra/saiga1.jpg

http://i78.photobucket.com/albums/j89/kf4zra/saiga2.jpg

[CPUFed]

http://img.photobucket.com/albums/v505/cpufed/DSC00443.jpg

[WellArmedSheep]

Finally got some photos of my defense shotgun made:
Remington 870 18" with factory mag extension, Tac-star side saddle, Speedfeed stock, Daniel Defense sling loop. 6 rounds of Hornady 00 buckshot in the mag, four more in the side saddle, plus two 3" slugs just for giggles. I'm a lefty, so I keep the slugs turned up so they're out of the way of my trigger finger. May also keep me from grabbing the wrong round in a stressfull situation.
(sorry for the number of pics...let me know if there's too many)
http://img.photobucket.com/albums/v312/scrcteach/Shooting/100_1802.jpg
http://img.photobucket.com/albums/v312/scrcteach/Shooting/100_1801.jpg
http://img.photobucket.com/albums/v312/scrcteach/Shooting/100_1800.jpg
http://img.photobucket.com/albums/v312/scrcteach/Shooting/100_1799.jpg
http://img.photobucket.com/albums/v312/scrcteach/Shooting/100_1798.jpg
http://img.photobucket.com/albums/v312/scrcteach/Shooting/100_1797.jpg
http://img.photobucket.com/albums/v312/scrcteach/Shooting/100_1796.jpg
http://img.photobucket.com/albums/v312/scrcteach/Shooting/100_1795.jpg

[CPUFed]

My Bushmaster 16", Remington 870 and XD-45 compact.

http://img.photobucket.com/albums/v505/cpufed/DSC00445.jpg
http://img.photobucket.com/albums/v505/cpufed/DSC00447.jpg
http://img.photobucket.com/albums/v505/cpufed/DSC00446.jpg

[HKG36]

Originally posted by CPUFed
My Bushmaster 16", Remington 870 and XD-45 compact.

http://img.photobucket.com/albums/v505/cpufed/DSC00445.jpg
http://img.photobucket.com/albums/v505/cpufed/DSC00447.jpg
http://img.photobucket.com/albums/v505/cpufed/DSC00446.jpg


Perfect match for any kind of Tactical situation!!

[Kinny]

Originally posted by 10-32
How's this?

http://i85.photobucket.com/albums/k45/10-32_79/6922260261.jpg

10-32, Here is a slightly better version for you. :)
http://img68.imageshack.us/img68/762/6922260261so3.jpg

[HKG36]

http://i116.photobucket.com/albums/o2/Joebiggie/M1Super90.jpg

[CPUFed]

http://img.photobucket.com/albums/v505/cpufed/DSC00628.jpg
http://img.photobucket.com/albums/v505/cpufed/DSC00632.jpg
http://img.photobucket.com/albums/v505/cpufed/DSC00633.jpg
http://img.photobucket.com/albums/v505/cpufed/DSC00626.jpg
http://img.photobucket.com/albums/v505/cpufed/DSC00622.jpg
http://img.photobucket.com/albums/v505/cpufed/DSC00611.jpg

[Kinny]

I've never really seen good pics of FN SLP. Thanks for the pics.

[epsylum]

CPUFed, those are some pretty pictures of pretty guns. I still want one of those FN SLPs pretty badly.

[Frr]

Tromix modified Saiga-12 shotgun with 10 round box mag
http://img243.imageshack.us/img243/4807/saiga12ada4.jpg


http://img243.imageshack.us/img243/4721/saiga12bwm9.jpg

[Walter45Auto]

Oh, I Like!:banana: :thumbsup:


:freak:






:reindeer: :50cal:

[HKG36]

Originally posted by CPUFed
http://img.photobucket.com/albums/v505/cpufed/DSC00628.jpg
http://img.photobucket.com/albums/v505/cpufed/DSC00632.jpg
http://img.photobucket.com/albums/v505/cpufed/DSC00633.jpg
http://img.photobucket.com/albums/v505/cpufed/DSC00626.jpg
http://img.photobucket.com/albums/v505/cpufed/DSC00622.jpg
http://img.photobucket.com/albums/v505/cpufed/DSC00611.jpg

The best photography technique that I ever seen so far!!

[Packin' Heat]

Originally posted by HKG36
The best photography technique that I ever seen so far!!

I know right! All natural lighting? if so, thats too perfect. I hate taking picts under florescent which is what always happens. I've got an Olympus C8080 so my picts really ought to be better, but as with firearms, the tool is only as good as the user. I'd love to know more about how the picts were taken.

[CPUFed]

Originally posted by Packin' Heat
I know right! All natural lighting? if so, thats too perfect. I hate taking picts under florescent which is what always happens. I've got an Olympus C8080 so my picts really ought to be better, but as with firearms, the tool is only as good as the user. I'd love to know more about how the picts were taken.

They were taken on a slightly overcast day at the gun range, no fancy lighting or anything else. Camera is a Sony DSC-W70 on auto setting. The shotguns were cooling off when I took the pictures. :thumbsup:

[HKG36]

Originally posted by CPUFed
They were taken on a slightly overcast day at the gun range, no fancy lighting or anything else. Camera is a Sony DSC-W70 on auto setting. The shotguns were cooling off when I took the pictures. :thumbsup:

I think afterall the sunlight is the best light source for the professional photography!!

[CooperGlocker]

I noticed everyone with side saddle type shotshell holders only has 6 shells. I found an 8 shell aluminum one with a rail up top by Mesa Tactical: http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=173712

Is there a reason everyone has 6 and not 8? My 870 holds 7, plus 1 in the pipe, so why not have a full reload at my disposal "just in case"?

[smoke]

Because the 8 shot ones are 3X the price of most 6 shot ones. Although my HD 870 is 6 + 1, I only load the 6 in the mag, so a 6 shot side-saddle is adequate.

[Miguel]

My HD tools:
http://www.hunt101.com/img/482945-big.JPG

Hatsan Escort 12GA (nice gun BTW) & G22

No comments about the furniture they're sitting on. I didn't picked it, and yes, is butt-ugly

[CooperGlocker]

Originally posted by smoke
Because the 8 shot ones are 3X the price of most 6 shot ones. Although my HD 870 is 6 + 1, I only load the 6 in the mag, so a 6 shot side-saddle is adequate.

Definitely a valid point. I was simply wondering if there was some kind of mechanical flaw, or it inhibits the function of the weapon. If not, then yeah, I can hold 8 rounds, I'd like an additional 8 on standby.

Does anybody else have an 8 shell holder installed on the side of their 870? I'd really like to see it installed before I buy.

Edit: Bingo! Found out why nobody uses the 8 shell holder:

FOREND COMPATIBILITY
Factory Remington forends, except police forends, feature significant receiver overlap when the bolt is pulled all the way back. These forends will need to be cut down or replaced with aftermarket “tactical” forends to be used with 6-
or 8-shot SureShell shotshell carriers. The 8-shot SureShell shotshell carrier extends all the way to the front of the Remington receiver. Almost every forend on the market, including the factory 1100/11-87 forend and SureFire® forends, will have to be modified slightly to
accommodate the 8-shot SureShell. The only exceptions of which we are aware are the Speedfeed tactical forend, and a rail forend from Falcon Industries. If you are installing an 8-shot SureShell shotshell carrier, measure your forend’s receiver overlap before you begin the installation. Then cut that amount off the end of the forend with a miter saw or a rotary arm saw for a perfect fit. SureFire forends can be used with 4- and 6-shot SureShell carriers without
modification.

6 shell it is! I don't wanna modify a $250+ surefire fore end to work right!

[WellArmedSheep]

Originally posted by CPUFed
They were taken on a slightly overcast day at the gun range, no fancy lighting or anything else. Camera is a Sony DSC-W70 on auto setting. The shotguns were cooling off when I took the pictures. :thumbsup:

That's what I thought...clouds make for a great light diffuser.

[HKG36]

Sony DSC-70 is also a good camera as well!!

[Miguel]

Tacticoolized look

http://www.hunt101.com/img/483177-big.JPG

http://www.hunt101.com/img/483175-big.JPG

[Boy_In_Blue]

Winchester 1300 Defender w/ ATI add ons

http://lh3.google.com/image/BigDaniel/Rf8qdpNxsiI/AAAAAAAAABU/k3PHGFpU5hc/s800/closed.JPG

http://lh5.google.com/image/BigDaniel/Rf8qgJNxsjI/AAAAAAAAABc/msYr8LZcxRs/s800/open.JPG

[stangyg123]

My Mossberg 500 Cruiser...

http://i39.photobucket.com/albums/e195/stangyg123/Mossberg500ACruiser.jpg

[Dan0076]

This is my HD shotgun. 870 Express. All I've added was the SpeedFeed stock.

[Dan0076]

Here's the pic.

[pens-66]

I'm gonna have me one of these by the weekend:banana:

[pens-66]

sorry pic didnt show up...lets try again

[josp]

Sadly I have only one.....

[Packin' Heat]

Originally posted by josp
Sadly I have only one.....

so freaking awesome, but I always wondered, shouldn't you get a knoxx grip for that lil' puppy?

[bunch_G17]

Updated picture of my Win 1300


http://i4.photobucket.com/albums/y131/bunchjonathan/shotty.jpg

[josp]

Packin' Heat
The recoil isn't that bad as you might think. Several female friends have shot it and they didn't seem to mind. The key is a strong grip and straight arm on the front grip. Falme? yes, much so, but I never liked hair on my knuckles anyway.:supergrin:

[hardonem]

DAMN! Now I have to get a shotgun too! Nice weapons gentlemen. Droolin' over that Beneli.:thumbsup:

[Lone_Wolfe]

I snagged a Benelli M2 Tac last month. I've GOT to get a pic of ot posted here. These are some awesome shotguns!

[markjones]

http://i15.photobucket.com/albums/a369/drmjones11/cutout.jpg

[DOG33]

OK here is my set up
Remington 870 Express Magnum with its play clothes on.
G
http://i173.photobucket.com/albums/w64/DOG3309/DSCI0524.jpg

[Mr Roger]

Originally posted by josp
Sadly I have only one.....

Wow, that was a realy nice one. I love the short ones:hearts:

Cheers
Roger

[stangyg123]

Added a Butler Creek folding stock and a Tac Star side saddle recently, here is the updated pic...

http://i39.photobucket.com/albums/e195/stangyg123/Mossy500ButlerCreekStock1.jpg

[-gunut-]

I have been looking for a shotgun photo gallery! Why is this not a sticky? :wiggle:


Anyone have any new shotguns to add?

[tecdv]

A good friend of mine.....

http://i79.photobucket.com/albums/j125/tecdv/m500bp.jpg

[Kinny]

http://img410.imageshack.us/img410/1272/img4394sra7.jpg
http://img410.imageshack.us/img410/6961/img4395syo7.jpg
http://img293.imageshack.us/img293/1618/img4396spp7.jpg

[GeneralGlocker]

Originally posted by DOG33
OK here is my set up
Remington 870 Express Magnum with its play clothes on.
G
http://i173.photobucket.com/albums/w64/DOG3309/DSCI0524.jpg


Is that pistol grip stock a new Knoxx stock? or something else? I noticed the pistol grip has grooves and most Knoxx stocks I've seen do not. Thanks.

[RojasTKD]

FN SLP (Self Loading Police) Semi-auto
FN TPS (Tactical Police Shotgun) Pump

They are pictured with my other FN's:
http://i210.photobucket.com/albums/bb141/RojasTKD/MyFNs008.jpg

[epsylum]

All the shotties in the house. All 12 gauge.

http://pixpipeline.com/s/28d9adb301c.jpg (http://pixpipeline.com/d/28d9adb301c.jpg)

[mauser]

this is soooo unfair:sad:

my rem870 looks so boring (german allowed style):sad:

[byf43]

First, my 1100 Competition Master ‘Clone’ built on a 1972 model 1100.
http://i15.photobucket.com/albums/a366/byf43/Shotgun%20pics/1100CMCloneII.jpg

Next, my 1100 Magnum (1983 model) w/Hastings 24” VR w/choke tubes.
http://i15.photobucket.com/albums/a366/byf43/Shotgun%20pics/1983Rem1100Magnum.jpg

My 1980 model 870P that I bought used. It was a ‘closet queen’. It had been fired no more than twice when I bought it.
http://i15.photobucket.com/albums/a366/byf43/Shotgun%20pics/Rem870Wingmaster-rightsmall.jpg

The 870 Express Magnum that I bought and ‘changed over’ for my daughter, for HD.
I took the wood furniture off and put a Knoxx SpecOps stock and a factory synthetic forend on it.
I have since put a Knoxx ‘PowerPak’ on the stock, along with the shellholder (not in photo). A ‘Scattergun Technologies’ (Wilson’s) magazine extension is ready to go on this scattergun, shortly.
http://i15.photobucket.com/albums/a366/byf43/Shotgun%20pics/Erins8701.jpg

Lastly, here’s a photo of my daughter getting ready to ‘light off’ some 00B on her first range trip. (Sorry for the not-so-good photo. I forgot my camera and this is from my cell phone.)
http://i15.photobucket.com/albums/a366/byf43/Shotgun%20pics/Erinw_her870.jpg
My daughter LOVES this shotgun!!!!! She fired over 150 rounds on her first range trip with this.
Shooting Remington ‘Sluggers’ feels like you are shooting a 28 ga.

[Robocop]

Here are my "work toys". The shotgun was worked over and shortened by Scatterguns about 6 years ago. I like em nice and short. Easier to clear buildings with. The department did this with ALL of its issued shotguns. I wouldn't mind adding and Eotech to it at some point. My AR has one, just not at the time this pic was taken.
http://img.photobucket.com/albums/v21/Denny347/Worktoys1.jpg

[Meat-Hook]

cool pics/cool thread

[jbroos]

http://www.johnbroos.com/glocktalk/IMG_0040-3.jpg

[DOG33]

Originally posted by GeneralGlocker
Is that pistol grip stock a new Knoxx stock? or something else? I noticed the pistol grip has grooves and most Knoxx stocks I've seen do not. Thanks.
Its not a Knoxx. The Knoxx will be my next purchase. That one came as a whole kit from ATI.
G

[jeremy1]

Originally posted by RojasTKD
FN SLP (Self Loading Police) Semi-auto
FN TPS (Tactical Police Shotgun) Pump

They are pictured with my other FN's:
http://i210.photobucket.com/albums/bb141/RojasTKD/MyFNs008.jpg


This pic is proof that FN makes the best weapons in the world

[Hydra-SHOKz]

http://i152.photobucket.com/albums/s192/RA357SIGT/REMINGTON870AR.jpg
http://i152.photobucket.com/albums/s192/RA357SIGT/REMINGTON870BR.jpg
http://i152.photobucket.com/albums/s192/RA357SIGT/REMINGTON870CR.jpg
http://i152.photobucket.com/albums/s192/RA357SIGT/REMINGTON870FR.jpg
http://i152.photobucket.com/albums/s192/RA357SIGT/REMINGTON870GR.jpg
http://i152.photobucket.com/albums/s192/RA357SIGT/REMINGTON870HR.jpg
http://i152.photobucket.com/albums/s192/RA357SIGT/REMINGTON870IR.jpg
http://i152.photobucket.com/albums/s192/RA357SIGT/REMINGTON870JR.jpg
http://i152.photobucket.com/albums/s192/RA357SIGT/REMINGTON870KR.jpg
http://i152.photobucket.com/albums/s192/RA357SIGT/REMINGTON870LR.jpg
http://i152.photobucket.com/albums/s192/RA357SIGT/REMINGTON870MR.jpg
http://i152.photobucket.com/albums/s192/RA357SIGT/REMINGTON870NR.jpg

[Norman]

Very nice, Hydra-SHOKz. :thumbsup:

[Tristan]

Hydra-SHOKz

who is the manufacturer of your front sight?

thnks

[Hydra-SHOKz]

Originally posted by Tristan
Hydra-SHOKz

who is the manufacturer of your front sight?

thnks

Its made by XS Sight Systems.Its there Big Dot Tritium for a pedestal Remington.They use Trijicon tritium inserts.

Theres a hole in the bottom of the sight that you fill with JB Weld and press it on over the stock bead.Works great.I use XS sights on all my SD weapons.

http://xssights.com/

http://i152.photobucket.com/albums/s192/RA357SIGT/EDCR16.jpg
http://i152.photobucket.com/albums/s192/RA357SIGT/EDCR17.jpg
http://i152.photobucket.com/albums/s192/RA357SIGT/Bushmaster009.jpg
http://i152.photobucket.com/albums/s192/RA357SIGT/REMINGTON870HR.jpg

[Tristan]

thnks i am looking for a sight for my issue shotgun and that is by far the best i have seen. the problem with with other night sights is that they are good at night but during the day or with light they are just black sights

[jeremy1]

Here is a pic of my mossy 590. Great piece for HD I got a Mepro front sight night on its way from Brownells.

[RattlerXX]

Here is my Remington Wilson/Scattergun 870. I would also like to get one of the blued Police models with wood.

[Blitzer]

I have the 12ga version of this NEF

http://i199.photobucket.com/albums/aa288/Blitzer0101/guns/zoom_tamer.jpg

Mossberg 500a with 18.5" barrel, metal hand guard, side saddle and Speedfeed butt stock.

http://i199.photobucket.com/albums/aa288/Blitzer0101/guns/Mossbeg_Homeland_Defense500.jpg

[twolf_rd]

My Mossberg 500

[LA_357SIG]

http://i90.photobucket.com/albums/k252/chrisq_01/DSCF0894.jpg

[nightwalker]

Beretta 1201 FPhttp://i98.photobucket.com/albums/l267/jmbenton/2007_1220Image0004-1.jpg

[nightwalker]

1201 FPhttp://i98.photobucket.com/albums/l267/jmbenton/2007_1220Image0002-2.jpg

[RazorbackME]

FN SLP (18")

http://img.photobucket.com/albums/v228/RazorbackME/FNSLP.jpg

[GregG17]

My New 870. Waiting on my sites to come so I can take her out.

[GregG17]

: ) My AR & 870...

[mini14jac]

My "tactical" shotgun is old school! :cool:

Mossberg Maverick, with Mossy 500 wood furniture.

[bhp9mm]

two remington 1100

[GregG17]

My New 870, added a speed feed IV stock,Mesa tactical side saddle and Trijicon Ghostring sites... :tongueout:

[Miguel]

My Hatsan Escort, 12 GA, pump-action SG. Nothing fancy or high dollar, but it goes bang every time

http://a196.ac-images.myspacecdn.com/images01/109/l_c2484adfdafa5ff0416530541dfb41d3.jpg

http://a221.ac-images.myspacecdn.com/images01/8/l_9a5628c71ffb57895e3a2e989d788914.jpg

http://a641.ac-images.myspacecdn.com/images01/82/l_d6d5264636ffb6715857283d467f62b8.jpg

[NeverMore1701]

Some nice shotguns here! And I don't even LIKE shotguns. They're long, heavy, limited capacity, slow to reload, and many (pumps) require manual cycling.
That said, I'll likely end up with a Stoeger Silvarado Coach gun, and maybe, once ALL my other gun needs/wants are out of the way, a fully tacticooled Tromix Saiga.
Until then, my Sears 200 (Winchester 1200), given to me by my dad when I was 8:

http://i61.photobucket.com/albums/h49/NeverMore1701/12ga.jpg

Note: This picture was taken immediately after shortening the barrel to 18 1/4", so the bead wasn't back on it.

[shootingbuff]

My Hatsan Escort, 12 GA, pump-action SG. Nothing fancy or high dollar, but it goes bang every time



That is all that is needed. Our local matches a pump beats semis and a side saddle beats shell caddies. As long as it goes bang and the shooter can that is all that matters.

sb

[ryan_kalani]

FN SLP (18")

http://img.photobucket.com/albums/v228/RazorbackME/FNSLP.jpg
How do you like it? I am comparing this to a Benelli M4 for my first , last, and only shotgun.

[stiletto raggio]

Same as above pictured with Olympic Arms AR15 with 40 rounder.
http://i60.photobucket.com/albums/h17/Walter-45-Auto/GunPics030.jpg


:freak:






:reindeer: :50cal:


This picture should be titled "Unnecessary magazine capacity" or, perhaps, "Zombie nightmare."

My own pictures will be up shortly. Saiga comes in tomorrow...

[jmb79]

I've had this one for about four months. Finally got around to taking some pics that didn't turn out so well. I think the late afternoon winter sun with funky shadows kind of confused my low tech digital camera.

Remington 870 Police Magnum
Vang Comp barrel with porting
Vang Comp +2 magazine extension
Fire control group from lefty 870P
Vang Comp dome safety
Trijicon (aka Scattergun Tech.) ghost ring sights w/ tritium front and rear
SureFire 618FA forend
SpeedFeed IV-S stock with SpeedFeed SWAT butt plate (12" LOP)
Mesa side saddle
Daniel Defense single point sling loop
Wilderness Tactical SPQD
http://i6.photobucket.com/albums/y238/greenst/870-1.jpg
http://i6.photobucket.com/albums/y238/greenst/870-2.jpg

[D3S3RT_P3NGU1N]

My HD shotty:

http://img1.putfile.com/thumb/11/32918335837.jpg (http://www.putfile.com/pic/4101499)

[Uncle Jess]

Mossberg 500A
heat shield
vertical forend
6 position adjustable stock w/ shell holder
receiver shell holder
<a href="http://s78.photobucket.com/albums/j109/unclejess/?action=view&current=5.jpg" target="_blank"><img src="http://i78.photobucket.com/albums/j109/unclejess/5.jpg" border="0" alt="Photobucket"></a>


<a href="http://s78.photobucket.com/albums/j109/unclejess/?action=view&current=4-1.jpg" target="_blank"><img src="http://i78.photobucket.com/albums/j109/unclejess/4-1.jpg" border="0" alt="Photobucket"></a>

<a href="http://s78.photobucket.com/albums/j109/unclejess/?action=view&current=3.jpg" target="_blank"><img src="http://i78.photobucket.com/albums/j109/unclejess/3.jpg" border="0" alt="Photobucket"></a>

<a href="http://s78.photobucket.com/albums/j109/unclejess/?action=view&current=2-1.jpg" target="_blank"><img src="http://i78.photobucket.com/albums/j109/unclejess/2-1.jpg" border="0" alt="Photobucket"></a>

<a href="http://s78.photobucket.com/albums/j109/unclejess/?action=view&current=1-1.jpg" target="_blank"><img src="http://i78.photobucket.com/albums/j109/unclejess/1-1.jpg" border="0" alt="Photobucket"></a>

[CAcop]

Jess,

Where did you get the fore end? I have been looking for one like that. All I can find is Remmy and Winchester forends.

[damndirtyape]

http://i30.tinypic.com/rwm2hk.jpg

A not terribly practical incarnation of my zombie kit. I need to load up some 223.

[Uncle Jess]

CAcop, I ordered the vertical grip forend from CDNNsports.com

http://www.cdnninvestments.com/mo50012tafow.html

See if this link works. All the best, Uncle Jess.

[CAcop]

It works but they are out of stock. I'll have to check back later. Thanks for the link.

[uz2bUSMC]

Here's the Silliest Shotgun you'll ever see:
http://olegvolk.net/gallery/d/17056-2/SBS5113.jpg

It's an NEF Pardner 12 gauge single-shot, registered as a Short-Barreled Shotgun, on a Form 2.

I was sitting around the shop one day, with a shotgun, an Adv. Tech. stock set, a machine shop, my twisted mind, a Type 07 FFL, and a Class 2 SOT. So, that's what you get, "The Beast."

She kicks like a mule, especially with 3" magnum slugs. With Aquila mini's, she's a kittycat, though.

The amazing thing is she's been sold to a local shop.

ETA: Did you know that you can't even spell the alternative to kittycat that begins with a p, even if you string the word together? How PC can we get? How many of us have always referred to a kitten as a p-u-s-s-y-c-a-t?


Did this take alot of work to get the stock and forend to fit?

[Revelations]

http://i30.tinypic.com/rwm2hk.jpg

A not terribly practical incarnation of my zombie kit. I need to load up some 223.

Ugh...when I see a picture like this..it makes me wish Indiana would allow SBS.


sweet looking shotgun...

[10 Ring Tao]

Might as well throw these in here too...

http://pixpipeline.com/s/588a64752ee2.jpg

http://pixpipeline.com/s/1c6733ef3d5e.jpg

http://pixpipeline.com/s/06080cc85cba.jpg

http://pixpipeline.com/s/857b39608a49.jpg

http://pixpipeline.com/s/ff8525360fbd.jpg

[10 Ring Tao]

http://pixpipeline.com/s/471546039043.jpg

http://pixpipeline.com/s/e3c60065916c.jpg

And because today was 4/16, and I wish I'd been there with this...

http://pixpipeline.com/s/f3dd4bb61ea4.jpg

[mirrorsbrightly]

http://pixpipeline.com/s/471546039043.jpg


what your light mount / what were the steps to imbed the studs? i have a scorpion and also have a fenix p3d CE coming and want to do something similar.
thanks

[mirrorsbrightly]

http://pixpipeline.com/s/471546039043.jpg


what your light mount / what were the steps to imbed the studs? i have a scorpion and also have a fenix p3d CE on the way and want to do something similar.
thanks

[10 Ring Tao]

what your light mount / what were the steps to imbed the studs? i have a scorpion and also have a fenix p3d CE on the way and want to do something similar.
thanks

This is the mount: http://www.dealextreme.com/details.dx/sku.1024 There is very little adjustment for tightening, so I had to use spacers for the scorpion. Ideally, you use a 1" tube in that mount, which I have on the way with a Fenix TK10 light.

I got this rail: http://www.dealextreme.com/details.dx/sku.5847

As you can see, it comes with round flange nuts. I simply drilled a couple holes, and then countersunk the inside of the hole to accommodate the flange.

I also shortened the rail and refinished it, but that doesn't change anything.

If I remember to later tonight, I'll take a picture of the inside of the handguard.

[DFin]

10 Ring Tao, what kind of mag extension is that? It looks like it is made of polymer or some kind of plastic.

[10 Ring Tao]

10 Ring Tao, what kind of mag extension is that? It looks like it is made of polymer or some kind of plastic.

It's made by ATI, and yes, it's plastic/polymer. I bought it because someone was selling it dirt cheap. I was skeptical, so I gave it a thorough going-over and have loaded/unloaded/shot a ton through it without any problems. The tacti-dudes hate them, but as far as I can see, it'll serve my needs just fine.

[markjones]

http://i15.photobucket.com/albums/a369/drmjones11/IMG_0899.jpg
http://i15.photobucket.com/albums/a369/drmjones11/IMG_0898.jpg
http://i15.photobucket.com/albums/a369/drmjones11/IMG_0896.jpg

[10 Ring Tao]

This is the mount: http://www.dealextreme.com/details.dx/sku.1024 There is very little adjustment for tightening, so I had to use spacers for the scorpion. Ideally, you use a 1" tube in that mount, which I have on the way with a Fenix TK10 light.

I got this rail: http://www.dealextreme.com/details.dx/sku.5847

As you can see, it comes with round flange nuts. I simply drilled a couple holes, and then countersunk the inside of the hole to accommodate the flange.

I also shortened the rail and refinished it, but that doesn't change anything.

If I remember to later tonight, I'll take a picture of the inside of the handguard.

And here is everything put together with the new light...

http://i294.photobucket.com/albums/mm104/10RingTao/scattergun/DSCN1416.jpg

http://i294.photobucket.com/albums/mm104/10RingTao/scattergun/DSCN1410.jpg

Sorry, the handguard didn't come off before I put it all back together.

[Mass10mm]

It ain't beautiful, and it's not an artistic photo, but his old Mossberg 500 is pretty effective for home defense out in the country. In about 10 minutes I can restore it back to its stock configuration for the fall hunting season. The rest of the year it looks like this.

http://tyobio.com/vette/Mossy.jpg

[mark996]

http://i3.photobucket.com/albums/y60/-stardust-/PIC-0071.jpg

I absolutely love the way you did the rail on the pump. I'm definitely doing something similar with mine. Thanks for the info.

That's my mossberg maverick that I recently upgraded from stock. I'm pretty pleased with the outcome and the thing shoots great.

[DGreno]

10 ring, Didn't I see that same gun pictured on THR? Looks familiar...

[D3S3RT_P3NGU1N]

Do i win? :supergrin:

http://i83.photobucket.com/albums/j320/spawnduffy17/e7a912b5.jpg

[markjones]

Nope....you might have if it was a game. :)

I loves me some OD Green action though.

Well done.

[CPUFed]

http://img.photobucket.com/albums/v505/cpufed/DSC02949.jpg
http://img.photobucket.com/albums/v505/cpufed/DSC02951.jpg

[blaster_54738]

here's mine so far. remington 870, arms tech ar15 adapter, 6 position collapsible stock, pistol grip and a hogue forend. i'm still waiting on the +3 extension

http://img511.imageshack.us/img511/5142/870cb6.jpg (http://imageshack.us)