Trigger adjustment

[Yamadad]

I have a CZ527 American in .223 and like it very much. However, the single set trigger leaves a lot to be desired. Is there a link or does anyone have the instructions on how to "tune" it? I've heard they can be made to be very nice once worked.

[Yamadad]

BTW, I do have the downloaded copy of the owner's manual and am not impressed. Also, the owner's manual says you can remove the double set funtion, but doesn't clarify how. That might also help the pull too.

[mpol777]

There are two adjustment screws on the front of the trigger assembly, and one on the back. The rear adjustment screw is for sear engagement. The upper front screw is pull weight; the lower screw is for over travel.

Turning the upper screw counterclockwise will decrease pull weight.

To adjust over travel, first make sure the rifle is UNLOADED (duh, I know, I know, but it has to be said); now turn the lower front screw clockwise until the sear will not trip (dry fire). Back this screw out until it will, then turn it out an additional 1/4 turn, and lock it down.

The rear screw is for sear engagement, if you do not have much experience with trigger work, I recommend you leave this alone. Improper adjustment WILL lead to accidental Ka-booms. Anytime you adjust anything on a trigger always make sure it is safe. Work the bolt vigorously; rap the butt hard etc., with the safety in both positions. If you don't feel comfortable doing this, a gunsmith wouldn't charge much to do it for you. No shame in that (gunsmiths gotta eat too).

One caveat, NEVER, EVER, walk around with your "set" trigger activated. These things are VERY sensitive and can go off at a crossword or uncharitable thought. If you set the trigger and don't take the shot, release it by pointing the rifle in a safe direction and pulling the trigger with the safety on.

You can remove the set feature. I've never found it necessary to get a good trigger.

[Yamadad]

Thanks. :)

So, how do you remove the set function? Mine is a field hunter, so I have no need for it and wonder if it's worth while. Not that I'd ever do it, but more information is always desired.