USPSA Open class holster?

[Glockmeister40]

I am using a G35 for competittion and just ordered a scope mount for my red dot from Glockmeister and was curious if anybody knew what holster would work with the gun now. The mount attaches to the bottom front rail and also goes thruogh the pin hole right in front of the trigger. any help is greatly appreciated :)

[Glockmeister40]

I was not sure if the CR speed holster would work with that mount I figured somebody else may have used that combination before

[Mark L Miller]

If you are using a Carver mount, you can modify the cr speed holster fairly easily to work. Lots of the guys around here do that. I even heard rumors cr speed may be doing that from the factory soon but I doubt it. Also, you can buy a modified one from Bobby Carver that will work with his mount. Good luck, MLM

[Glockmeister40]

I did not meen to post this in the wrong spot but Iwas not sure exactly where the thread should have been .Thanks for moving it to the correct forum. I am using the mount from www.Glockmeister.com is that like the Carver mount ?

[Mark L Miller]

It looks like about half or three quarters of a carver mount. I'm not sure what you can do about a holster. Good luck. MLM

[4eyes]

That mount is a T. H. E. Accessories mount with a Glockmeister name on it. A CR Speed holster will fit if you remove some non functioning material from the holster to allow that part of the mount under the dust cover to fit. Not a big deal to modify the holster.

[Glockmeister40]

I appreciate the help I will just get a CR Speed and figure out what I need to remove from it now :)

[TimWarner]

you'll have to cut away some of the rail that the muzzle cup slides on, with a CR speed. Not a big deal, easily doable with a dremel. I'd have a file handly to flatten it out and make it look nicer.

Down side is you won't be able to use a G26 in your CR speed.

Bummer.

[have2rotties]

I have a G34 that has the Glockmeister mount your speaking of. I ordered the "modified" CR Speed holster from Bobby Carver and it works perfect. Very fast. It was only $10.00 more for the modified unit.
Good luck,
-J-

[buzz12]

yes cr speed is modifing the holsters in house and are availble now or at least they had them at the shot show