Warren / Sevigny tritium n/s

[maineglocker]

Just received a set of warren /sevigny sights from custom glock racing today. The front sight is tritium while the rear sight is black with a u shaped notch in the rear. The rear sight is cut a little wider so it lets plenty of light in. I like heinie sights but I wanted to try something different on my other G17. I think these sights will work really well I will try them out this weekend.

[goshinkaibushi]

I just put on several sets of Warren Tactical sights... one set in Three Dot configuration and two in plain rear/tritium front. These sights rock! The Sevigny Tactical are nice, but I wanted the Warren Tactical rear sight (I like the way it is shaped... as it quickly moves your eye to the front sight... no sharp edges stopping your eyes).

They are very fast... the front sight jumps out at you. With the three dot version, the front sight is the most dominate feature. I like the construction and love the fact that you can use the sight to rack the slide to do one handed malfunction clearances, etc.

If you are in the market for sights... give Warren Tactical Sights a try. Also, I purchased mine from i-shot and they were excellent to work with!

Just my 0.02 worth.

Justin

[kengps]

Did you have any trouble installing the rears? I removed metal on the bottom as they suggested. Could see daylight underneath and it still wouldn't slide on more than half way. Beat the heck out of it trying. This particualr Glock 17 is a bit looser than the dovetail on my G19. I took the G19 sights off (express 24/7) and they slid thru the G17 like nothing was there.

[maineglocker]

I did have to remove a little metal. I used a flat stone to remove some metal I also put a little oil in the rear dovetail when installing the rear sight. It was tight but not so tight I could not get it in.

[goshinkaibushi]

Nope... I just pushed them in with my sight pusher... didn't even bother with some oil, as recommended. They are tight... but went in without trouble...

Justin

[Guardian angel]

Hi there,

I've purchased Warren Tactical Sights Too for one of my glock's. I'm waiting. Just a question : I do not yet on wich Glock I will pu the sights (G19/G17/G34). I'm asking me if the front dot won't be too tigh on my G34 or too big on my G19. Any suggestion ?

Thanks.

[Speedrock]

"it still wouldn't slide on more than half way. Beat the heck out of it trying."

Info is to sketchy? Have the slide in a padded bench vise? Using a hammer and brass or nylon punch? May have to invest in a triangle sight file from Brownell's, if you do get the fine as won't have to take much at all off the sides of the sight's sides at all....

[kengps]

Ended up taking it to a gun shop. He couldn't get it on either. Had to get it off and put it on a grinder and use a triangular file. Went on but he said it's still very tight.