seeing some lines or scratches on on my norc barrel [Archive] - Glock Talk


View Full Version : seeing some lines or scratches on on my norc barrel

henry silos
01-29-2007, 22:55
gud day mga bro., advise naman if it is natural that you see some lines or scratches on your norinco .45cal barrel due to should i say barrel to receiver contact, im a newbie with guns, thanks for you comments.

01-29-2007, 23:09
Take some pictures so we can assess if the scratches are normal or undue wear and tear. Naapektuhan ba functionality?

henry silos
01-30-2007, 00:04
Actually i only fired 500rds. on it, i just saw some lines in the barrel that might end up in loosing the chrome line after firing lots of rounds with it. the performance is superb

01-30-2007, 00:46
Which part of the barrel?

bertud ng putik
01-30-2007, 01:40
its very normal my dear friend, worry if the scratches are inside the barrel. (pagsinilip mo yung grooving)dyan ka kabahan.:upeyes:

01-30-2007, 05:34
nakow! sira na agad after 500 rounds. bilhin ko na yang barrel mo at P 1,000 tapos bili ka na lang ng Armscor barrel.

henry silos
01-31-2007, 02:00
the scratches are in the outer upper side of the barrel it starts in the barrel lug and end up in the last part of the barrel where shells goes out.

01-31-2007, 17:19
Can't avoid slide-barrel wear.
However, lines indicate poor barrel-slide fit (or conversely, an over-exuberant chroming); possibly out-of-spec barrel link,lugs and pin.

Norinco ka pa kasi, e.

01-31-2007, 21:08
Did you, by any chance, change the barrel link on your gun? Have the barrel to slide fit checked. However, I would not recommend using a long barrel link. It can eventually shear the lugs on your barrel if you have an improper fit.