ideal .40 STI LDC springs [Archive] - Glock Talk

PDA

View Full Version : ideal .40 STI LDC springs


emac
02-14-2007, 17:57
ilang pounds po ang dapat na recoil spring para sa STI long dust cover? at ilang pounds para sa Hammer spring?

ito po ang load ng friend ko as of now:
4.5 grs. N320
180 grs. plated from stronghand

please share your spring combinations & pet load recipes.

thanks

;) :thumbsup:

bulm540
02-15-2007, 06:40
Originally posted by emac
ilang pounds po ang dapat na recoil spring para sa STI long dust cover? at ilang pounds para sa Hammer spring?

ito po ang load ng friend ko as of now:
4.5 grs. N320
180 grs. plated from stronghand

please share your spring combinations & pet load recipes.

thanks

;) :thumbsup:
12.5 # recoil spring, 17# main spring. TEll your friend to Check his load. If he is loading long ( 1.200 +)OAL, he is probably not making major. I am loading 4.9 Grains with molycoated bullets at 1.220 OAL ( 172 PF).
Gun is SV LDC.

Eye Cutter
02-15-2007, 07:27
15lbs is the lowest srping weight for the mainspring that you should try, imho, but you need to get an extended fp like the limcat or egw to avoid misfires.

i use a 19 lb ismi. can't detect the difference bet. the 17 and 19 so i stuck to the 19lb for the added reliability.

recoil spring is ismi 12.5lbs

PS: most US smiths use ismi chrome silicon springs, but wolff, wilson or nowlin springs are also very good. But you'll notice most ipsc shooters use ismi springs.

And never cut the mainspring to shorten and further reduce the power. mag du.dud ka lang. most local gunsmiths cut the springs when they do a trigger job. siguraduhin mo na huwag putulin.

try mo rin 4.1gr n320 with 200 gr heads. oal 1.160in sa para-ord ko

jasonub
02-15-2007, 17:15
ismi 15 pounds ms. and 12.5 recoil spring svi long dust. when i was using stronghand iirc 4.9 grains n320 oal 1.210

now were using cheaper heads its 4.7 gr 1150 oal

PM sent check your inbox

emac
02-15-2007, 18:04
thank u very much sa inyong priceless tips... 12.5 lbs po pala dapat ang recoil spring nya at hindi nya dapat gamitin ang 14 lbs. na nasa kaniyang parts drawer.. ok na po yung hammer spring nya....BTW 195 grains nga pala ang actual weight ng plated heads ng stronghand.. indoor range kasi kami madalas kaya hindi namin gaano gamit ang teflon dahil sa smell nito. Thanks again sa inyong tips:thumbsup:

Eye Cutter
02-15-2007, 18:08
nothing wrong with using a 14lb mainspring. you just have to try the different spring rates to see if it makes a big difference in the pistol's handling.